 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
I think its funny hoe people start hating.
I have nothing but greetings to say about gawminers and i have used a lot of there products. I have even revived returns that we re caused by changes in the market that they could never have anticipated but hurt miners. I look forward to watching both paycoins, and will be holder of both.
|
|
|
|
|
Whats going on with mining the coin, did we reach the end of mining, i went away for a few days and i come back and the network is dead and its just me mining away at nothing?
|
|
|
|
LOL 7 miners support this coin  You lazy, fatty bastards all go to pools. Stop sitting and waiting free coins! One R9 290 mine 900 Sign per day. lol i hear you, I've had a few 7950's pointed at this coin since launch and I've gotten a ton of coins. id be rich if this coin went up a bit. |
|
|
|
|
Any idea on when this coin will make it to larger exchange and when does distribution end?
|
|
|
|
|
Anything New Going on here?
|
|
|
|
|
Id like to see what happens once this coin gets onto a larger exchange
|
|
|
|
|
How much longer is this coin going to be mineable?
|
|
|
|
|
Finally got a payout after over a week, no reason for the lack of payment but finally its fixed.
|
|
|
|
|
Anybody else having trouble getting coins? I was getting daily then nothing or over a week, website says accepted, sig is correct. not getting any response from dev in thread or pm.
Anyone having a similar issue.
Dev can you help out, the issues are understandable they happen, lack of response is dis-heartening.
|
|
|
|
|
This is really cool. id like to help keep ICB alive. PM me if there is anything i can do to help.
|
|
|
|
|
I haven't received coins for over a week now. Website shows accepted. i PMed dev. whats going on?
|
|
|
|
i currently have 6 s1's running at 200gh/s at 400w each powered by 2 corsair AX1200i's and its getting to the point where I'm not making much, i probably won't make anything after this next jump in diff unless BTC goes back up to 600.
Im looking to get these guys down to 200w each, and get all 6 on 1 psu.
What appears to be the best config for them running around 200w? the Corsairs are a beast and although rated at 1200 I've run some of them at 1300 and 1400 for an extended period of time with no issues. I had to put the AX1500i that i have my 4 overlocked S3s connected to on its own circuit breaker. but then again at the price they are they should be crazy good pus's
i want to drop the voltage down to .85. it looks like some people had some good luck getting around 150-160 ghs here. what freq are people using in this area.
and i haven't seen much talk of dropping the voltage down to .75 what kind of results are people getting there.
Just an update, i undervolted 5 of my S1'a and left 1 at the overlocked speed and was able to get all 6 on the single psu. the undervalued one all average around 145 gh at about 170 watts at the wall. |
|
|
|
Also I've been getting a good bit of non accepted mined blocks, I've never really got this part of POW coins. I know its usually because my wallet is out of date but that is not thecae here. Is there a reason my non-accepted blocks would increase so dramatically.
also when a POS mined block is unaccepted, does it work against you, i.e. does it reduce the total amount you generate or is it ignored and your stake weighed mining goes on as if there was never a mined block. sorry i know this is a bit off topic for this thread just hoping someone might have an answer.
If you get a huge number of rejected shares it means you are solving blocks already solved. That is you are solving them but before they can confirm, someone else has solved it. If you have slow internet that could be an issue or also it could be that you need to add nodes to the .conf file. My last post was in repose to this quote.. |
|
|
|
|
Thank you,
Do you know if it counts agains you as far as your stake age? or does your stake age stay the same as if it never happened?
|
|
|
|
|
Also I've been getting a good bit of non accepted mined blocks, I've never really got this part of POW coins. I know its usually because my wallet is out of date but that is not thecae here. Is there a reason my non-accepted blocks would increase so dramatically.
also when a POS mined block is unaccepted, does it work against you, i.e. does it reduce the total amount you generate or is it ignored and your stake weighed mining goes on as if there was never a mined block. sorry i know this is a bit off topic for this thread just hoping someone might have an answer.
|
|
|
|
|
Whats the last POW block #?
|
|
|
|
|
i currently have 6 s1's running at 200gh/s at 400w each powered by 2 corsair AX1200i's and its getting to the point where I'm not making much, i probably won't make anything after this next jump in diff unless BTC goes back up to 600.
Im looking to get these guys down to 200w each, and get all 6 on 1 psu.
What appears to be the best config for them running around 200w? the Corsairs are a beast and although rated at 1200 I've run some of them at 1300 and 1400 for an extended period of time with no issues. I had to put the AX1500i that i have my 4 overlocked S3s connected to on its own circuit breaker. but then again at the price they are they should be crazy good pus's
i want to drop the voltage down to .85. it looks like some people had some good luck getting around 150-160 ghs here. what freq are people using in this area.
and i haven't seen much talk of dropping the voltage down to .75 what kind of results are people getting there.
|
|
|
|
|
This was super helpful, i can't believe how quickly diff is going up, crazy. i feel like my s3's are going to be obsolete next week.
|
|
|
|
|
Ill give that a try, I know when you under volt you have to declock but wasn't sure if you could get good performance just by under clocking, id rather just under clock than under volt. more complicated process. and i don't know wtf i put my voltmeter its been a long time since I've needed it.
|
|
|
|
|
Really can't wait till this coin grabs some traction, what can be done to help.
|
|
|
|
|
