OK that did it!

This is what I had to do on the HP for anyone who finds this in the future:

1.) Hold the ESC button to enter bios
2.) Press F10 for settings
3.) Go to advanced tab and select Secure Boot Settings
4.) Select "Legacy Enable and Secure Boot Disable"
5.) F10 to save changes
6.) HP will then prompt you to type 4 numbers and confirm.... note you need to use the numbers above the letters on your keyboard not the pad.
7.) while it reboots hold ESC to get back into BIOS
8.) Select USB to boot from

I'm trying to run myNode on a HP Elite Desk 705 mini PC. When booting from the USB I'm getting the error "Selected boot image did not authenticate":

https://image.nostr.build/af6580a98250750fd6624fb7e09a4278a8dc38c22e66fe491510be3bbcb706e2.png


ANyone have any ideas? I've tried two different USBs so far etched with Balena and the extracted image file from myNode's site (PC Image / Model Two | Download v0.3.24 (amd64))

Thanks hommies