Show Posts
Here are the symptoms:
1. The control board seems worked. I can see the green light blink.
2. I can log in the machine from my computer,
3. The red lights on hash boards were turned on when the machine boots.
4. The red lights turned on but couldn't stay for more than 3 mins, then they all turned off. After 2 mins, they back on, and later they turned off.
5. I can not see any hash board appeared in the Miner Status tab.
6. Under the Network->Diagnostics, I can not get response from ping bitmaintech.com
Could any one help me to check where is wrong? Since 3 machines all have the same symptoms, I suspect there is a software setting I set wrong. Thanks.
Here are the logs:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
- 0
- 1
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000292] ps7-ttc #0 at df804000, irq=43
[ 0.000594] Console: colour dummy device 80x30
[ 0.000622] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040197] pid_max: default: 32768 minimum: 301
[ 0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042585] CPU: Testing write buffer coherency: ok
[ 0.042890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042947] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.043168] L310 cache controller enabled
[ 0.043188] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210217] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210345] Brought up 2 CPUs
[ 0.210364] SMP: Total of 2 processors activated.
[ 0.210372] CPU: All CPU(s) started in SVC mode.
[ 0.211032] devtmpfs: initialized
[ 0.213455] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214640] regulator-dummy: no parameters
[ 0.221503] NET: Registered protocol family 16
[ 0.223669] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.225928] cpuidle: using governor ladder
[ 0.225941] cpuidle: using governor menu
[ 0.233330] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.234846] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.234859] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.234968] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.256380] bio: create slab <bio-0> at 0
[ 0.257773] vgaarb: loaded
[ 0.258465] SCSI subsystem initialized
[ 0.259340] usbcore: registered new interface driver usbfs
[ 0.259519] usbcore: registered new interface driver hub
[ 0.259736] usbcore: registered new device driver usb
[ 0.261064] media: Linux media interface: v0.10
[ 0.261426] Linux video capture interface: v2.00
[ 0.261688] pps_core: LinuxPPS API ver. 1 registered
[ 0.261700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.261828] PTP clock support registered
[ 0.262195] EDAC MC: Ver: 3.0.0
[ 0.263367] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266075] DMA-API: preallocated 4096 debug entries
[ 0.266089] DMA-API: debugging enabled by kernel config
[ 0.266159] Switched to clocksource arm_global_timer
[ 0.286323] NET: Registered protocol family 2
[ 0.286975] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287032] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287117] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287159] TCP: reno registered
[ 0.287175] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287207] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287440] NET: Registered protocol family 1
[ 0.287765] RPC: Registered named UNIX socket transport module.
[ 0.287777] RPC: Registered udp transport module.
[ 0.287786] RPC: Registered tcp transport module.
[ 0.287794] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.287806] PCI: CLS 0 bytes, default 64
[ 0.288231] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290207] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292266] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292455] msgmni has been set to 967
[ 0.293209] io scheduler noop registered
[ 0.293222] io scheduler deadline registered
[ 0.293259] io scheduler cfq registered (default)
[ 0.305340] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305359] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.429180] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.996781] console [ttyPS0] enabled
[ 1.001031] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.008649] [drm] Initialized drm 1.1.0 20060810
[ 1.025546] brd: module loaded
[ 1.034933] loop: module loaded
[ 1.044319] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.050191] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.058055] libphy: XEMACPS mii bus: probed
[ 1.062420] ------------- phy_id = 0x3625e62
[ 1.067324] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.075886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.082539] ehci-pci: EHCI PCI platform driver
[ 1.089929] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.096752] usbcore: registered new interface driver usb-storage
[ 1.103570] mousedev: PS/2 mouse device common for all mice
[ 1.109743] i2c /dev entries driver
[ 1.116641] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.122125] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.128058] Xilinx Zynq CpuIdle Driver started
[ 1.132904] sdhci: Secure Digital Host Controller Interface driver
[ 1.139023] sdhci: Copyright(c) Pierre Ossman
[ 1.143335] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.150217] mmc0: no vqmmc regulator found
[ 1.154232] mmc0: no vmmc regulator found
[ 1.196178] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204845] usbcore: registered new interface driver usbhid
[ 1.210363] usbhid: USB HID core driver
[ 1.215061] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221364] nand: Micron MT29F2G08ABAEAWP
[ 1.225329] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231267] Bad block table found at page 131008, version 0x01
[ 1.237490] Bad block table found at page 130944, version 0x01
[ 1.243537] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249320] Creating 3 MTD partitions on "pl353-nand":
[ 1.254411] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262458] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.269790] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280531] TCP: cubic registered
[ 1.283763] NET: Registered protocol family 17
[ 1.288458] Registering SWP/SWPB emulation handler
[ 1.294337] regulator-dummy: disabling
[ 1.298641] UBI: attaching mtd1 to ubi0
[ 1.824920] UBI: scanning is finished
[ 1.836525] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843579] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850366] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857051] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863889] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869900] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877011] UBI: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 347537888
[ 1.886024] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895253] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.895259] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.911380] ALSA device list:
[ 1.914266] No soundcards found.
[ 1.919473] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.948554] UBIFS: recovery needed
[ 2.022909] UBIFS: recovery completed
[ 2.026587] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.032511] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.041649] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.051558] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.056572] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-4224-902F-9EE5F976D1A6, small LPT model
[ 2.067850] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.075010] devtmpfs: mounted
[ 2.078139] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 2.911320] random: dd urandom read with 1 bits of entropy available
[ 3.296204]
[ 3.296204] bcm54xx_config_init
[ 3.906200]
[ 3.906200] bcm54xx_config_init
[ 14.907047] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 14.913132] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 16.916978] xemacps e000b000.ps7-ethernet: link down
[ 18.916982] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 30.430120] In axi fpga driver!
[ 30.433188] request_mem_region OK!
[ 30.436610] AXI fpga dev virtual address is 0xdf9fe000
[ 30.441687] *base_vir_addr = 0xc51e
[ 30.456866] In fpga mem driver!
[ 30.459932] request_mem_region OK!
[ 30.463496] fpga mem virtual address is 0xe2000000
[ 31.266212]
[ 31.266212] bcm54xx_config_init
[ 31.896212]
[ 31.896212] bcm54xx_config_init
[ 34.897045] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 34.903066] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 46.906982] xemacps e000b000.ps7-ethernet: link down
[ 48.906984] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 237.448403] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f3c000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d35000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 80088d8463db8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[5] has core num=1
Chain[5] ASIC[9] has core num=2
Chain[5] ASIC[10] has core num=5
Chain[5] ASIC[11] has core num=1
Chain[5] ASIC[15] has core num=15
Chain[5] ASIC[43] has core num=15
Chain[5] ASIC[48] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:55] [63:50] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[6] has core num=3
Chain[6] ASIC[12] has core num=15
Chain[6] ASIC[15] has core num=1
Chain[6] ASIC[23] has core num=2
Chain[6] ASIC[41] has core num=5
Chain[6] ASIC[61] has core num=1
Chain[6] ASIC[62] has core num=2
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=21847 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8865 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=28359 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=15391 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 2442 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21919 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8959 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Wed Dec 5 15:12:44 CST 2018 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80088d8463db8854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[4] speed=2880
get fan[4] speed=2880
get fan[4] speed=2880
get fan[5] speed=2880
get fan[4] speed=2880
get fan[5] speed=2880
get fan[4] speed=2880
get fan[5] speed=2880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin: 0 : 125 : 0 : 72 : 0 : 72 : 4
update: 0 : 125 : 0 : 27 : 0 : 27 : 4
Chain[J6] has backup chain_voltage=830
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:55] [63:50] [63:255] [63:255]
origin: 0 : 125 : 0 : 72 : 0 : 72 : 4
update: 0 : 125 : 0 : 27 : 0 : 27 : 4
Chain[J7] has backup chain_voltage=830
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin: 0 : 125 : 0 : 72 : 0 : 72 : 4
update: 0 : 125 : 0 : 27 : 0 : 27 : 4
Chain[J8] has backup chain_voltage=830
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=193 value=830
Chain[J7] orignal chain_voltage_pic=193 value=830
Chain[J8] orignal chain_voltage_pic=193 value=830
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[5] has core num=1
Chain[J6] ASIC[9] has core num=2
Chain[J6] ASIC[10] has core num=5
Chain[J6] ASIC[11] has core num=1
Chain[J6] ASIC[15] has core num=15
Chain[J6] ASIC[43] has core num=15
Chain[J6] ASIC[48] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[6] has core num=3
Chain[J7] ASIC[12] has core num=15
Chain[J7] ASIC[15] has core num=1
Chain[J7] ASIC[23] has core num=2
Chain[J7] ASIC[41] has core num=5
Chain[J7] ASIC[61] has core num=1
Chain[J7] ASIC[62] has core num=2
Chain[J8] has core num in PIC
miner total rate=9425GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=637
Asic[ 0]:445
Asic[ 1]:445 Asic[ 2]:445 Asic[ 3]:445 Asic[ 4]:445 Asic[ 5]:445 Asic[ 6]:445 Asic[ 7]:445 Asic[ 8]:445
Asic[ 9]:445 Asic[10]:445 Asic[11]:445 Asic[12]:445 Asic[13]:445 Asic[14]:445 Asic[15]:445 Asic[16]:445
Asic[17]:445 Asic[18]:445 Asic[19]:445 Asic[20]:445 Asic[21]:445 Asic[22]:445 Asic[23]:445 Asic[24]:445
Asic[25]:445 Asic[26]:445 Asic[27]:445 Asic[28]:445 Asic[29]:445 Asic[30]:445 Asic[31]:445 Asic[32]:445
Asic[33]:445 Asic[34]:445 Asic[35]:445 Asic[36]:445 Asic[37]:445 Asic[38]:445 Asic[39]:445 Asic[40]:445
Asic[41]:445 Asic[42]:445 Asic[43]:445 Asic[44]:445 Asic[45]:445 Asic[46]:445 Asic[47]:445 Asic[48]:445
Asic[49]:445 Asic[50]:445 Asic[51]:445 Asic[52]:445 Asic[53]:445 Asic[54]:445 Asic[55]:445 Asic[56]:445
Asic[57]:445 Asic[58]:445 Asic[59]:445 Asic[60]:445 Asic[61]:445 Asic[62]:445
Chain:5 max freq=445
Chain:5 min freq=445
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:445
Asic[ 1]:445 Asic[ 2]:445 Asic[ 3]:445 Asic[ 4]:445 Asic[ 5]:445 Asic[ 6]:445 Asic[ 7]:445 Asic[ 8]:445
Asic[ 9]:445 Asic[10]:445 Asic[11]:445 Asic[12]:445 Asic[13]:445 Asic[14]:445 Asic[15]:445 Asic[16]:445
Asic[17]:445 Asic[18]:445 Asic[19]:445 Asic[20]:445 Asic[21]:445 Asic[22]:445 Asic[23]:445 Asic[24]:445
Asic[25]:445 Asic[26]:445 Asic[27]:445 Asic[28]:445 Asic[29]:445 Asic[30]:445 Asic[31]:445 Asic[32]:445
Asic[33]:445 Asic[34]:445 Asic[35]:445 Asic[36]:445 Asic[37]:445 Asic[38]:445 Asic[39]:445 Asic[40]:445
Asic[41]:445 Asic[42]:445 Asic[43]:445 Asic[44]:445 Asic[45]:445 Asic[46]:445 Asic[47]:445 Asic[48]:445
Asic[49]:445 Asic[50]:445 Asic[51]:445 Asic[52]:445 Asic[53]:445 Asic[54]:445 Asic[55]:445 Asic[56]:445
Asic[57]:445 Asic[58]:445 Asic[59]:445 Asic[60]:445 Asic[61]:445 Asic[62]:445
Chain:6 max freq=445
Chain:6 min freq=445
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:445
Asic[ 1]:445 Asic[ 2]:445 Asic[ 3]:445 Asic[ 4]:445 Asic[ 5]:445 Asic[ 6]:445 Asic[ 7]:445 Asic[ 8]:445
Asic[ 9]:445 Asic[10]:445 Asic[11]:445 Asic[12]:445 Asic[13]:445 Asic[14]:445 Asic[15]:445 Asic[16]:445
Asic[17]:445 Asic[18]:445 Asic[19]:445 Asic[20]:445 Asic[21]:445 Asic[22]:445 Asic[23]:445 Asic[24]:445
Asic[25]:445 Asic[26]:445 Asic[27]:445 Asic[28]:445 Asic[29]:445 Asic[30]:445 Asic[31]:445 Asic[32]:445
Asic[33]:445 Asic[34]:445 Asic[35]:445 Asic[36]:445 Asic[37]:445 Asic[38]:445 Asic[39]:445 Asic[40]:445
Asic[41]:445 Asic[42]:445 Asic[43]:445 Asic[44]:445 Asic[45]:445 Asic[46]:445 Asic[47]:445 Asic[48]:445
Asic[49]:445 Asic[50]:445 Asic[51]:445 Asic[52]:445 Asic[53]:445 Asic[54]:445 Asic[55]:445 Asic[56]:445
Asic[57]:445 Asic[58]:445 Asic[59]:445 Asic[60]:445 Asic[61]:445 Asic[62]:445
Chain:7 max freq=445
Chain:7 min freq=445
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=637
Asic[ 0]:433
Asic[ 1]:433 Asic[ 2]:433 Asic[ 3]:433 Asic[ 4]:433 Asic[ 5]:433 Asic[ 6]:433 Asic[ 7]:433 Asic[ 8]:433
Asic[ 9]:433 Asic[10]:437 Asic[11]:437 Asic[12]:437 Asic[13]:437 Asic[14]:437 Detect a bad chip=15 on chain[5], fixed to 400M
Asic[15]:445 Asic[16]:437
Asic[17]:437 Asic[18]:437 Asic[19]:437 Asic[20]:437 Asic[21]:437 Asic[22]:437 Asic[23]:437 Asic[24]:437
Asic[25]:437 Asic[26]:437 Asic[27]:437 Asic[28]:437 Asic[29]:437 Asic[30]:437 Asic[31]:437 Asic[32]:437
Asic[33]:437 Asic[34]:437 Asic[35]:437 Asic[36]:437 Asic[37]:437 Asic[38]:437 Asic[39]:437 Asic[40]:437
Asic[41]:437 Asic[42]:437 Detect a bad chip=43 on chain[5], fixed to 400M
Asic[43]:445 Asic[44]:437 Asic[45]:437 Asic[46]:437 Asic[47]:437 Asic[48]:437
Asic[49]:437 Asic[50]:437 Asic[51]:437 Asic[52]:437 Asic[53]:437 Asic[54]:437 Asic[55]:437 Asic[56]:437
Asic[57]:437 Asic[58]:437 Asic[59]:437 Asic[60]:437 Asic[61]:437 Asic[62]:437
Chain:5 max freq=445
Chain:5 min freq=433
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:429
Asic[ 1]:429 Asic[ 2]:429 Asic[ 3]:429 Asic[ 4]:429 Asic[ 5]:429 Asic[ 6]:429 Asic[ 7]:429 Asic[ 8]:429
Asic[ 9]:429 Asic[10]:429 Asic[11]:429 Detect a bad chip=12 on chain[6], fixed to 400M
Asic[12]:445 Asic[13]:429 Asic[14]:429 Asic[15]:429 Asic[16]:429
Asic[17]:429 Asic[18]:429 Asic[19]:429 Asic[20]:429 Asic[21]:429 Asic[22]:429 Asic[23]:429 Asic[24]:429
Asic[25]:429 Asic[26]:429 Asic[27]:429 Asic[28]:429 Asic[29]:429 Asic[30]:429 Asic[31]:429 Asic[32]:429
Asic[33]:429 Asic[34]:429 Asic[35]:429 Asic[36]:429 Asic[37]:429 Asic[38]:429 Asic[39]:429 Asic[40]:429
Asic[41]:429 Asic[42]:429 Asic[43]:429 Asic[44]:431 Asic[45]:431 Asic[46]:431 Asic[47]:431 Asic[48]:431
Asic[49]:431 Asic[50]:431 Asic[51]:431 Asic[52]:431 Asic[53]:431 Asic[54]:431 Asic[55]:431 Asic[56]:431
Asic[57]:431 Asic[58]:431 Asic[59]:431 Asic[60]:431 Asic[61]:431 Asic[62]:431
Chain:6 max freq=445
Chain:6 min freq=429
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:420
Asic[ 1]:420 Asic[ 2]:420 Asic[ 3]:420 Asic[ 4]:420 Asic[ 5]:420 Asic[ 6]:420 Asic[ 7]:420 Asic[ 8]:420
Asic[ 9]:420 Asic[10]:420 Asic[11]:420 Asic[12]:420 Asic[13]:420 Asic[14]:420 Asic[15]:420 Asic[16]:420
Asic[17]:420 Asic[18]:420 Asic[19]:420 Asic[20]:420 Asic[21]:420 Asic[22]:420 Asic[23]:420 Asic[24]:420
Asic[25]:420 Asic[26]:420 Asic[27]:420 Asic[28]:420 Asic[29]:420 Asic[30]:420 Asic[31]:420 Asic[32]:420
Asic[33]:420 Asic[34]:420 Asic[35]:420 Asic[36]:420 Asic[37]:420 Asic[38]:425 Asic[39]:425 Asic[40]:425
Asic[41]:425 Asic[42]:425 Asic[43]:425 Asic[44]:425 Asic[45]:425 Asic[46]:425 Asic[47]:425 Asic[48]:425
Asic[49]:425 Asic[50]:425 Asic[51]:425 Asic[52]:425 Asic[53]:425 Asic[54]:425 Asic[55]:425 Asic[56]:425
Asic[57]:425 Asic[58]:425 Asic[59]:425 Asic[60]:425 Asic[61]:425 Asic[62]:425
Chain:7 max freq=425
Chain:7 min freq=420
max freq = 445
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:46 remote:0 offset:78
Chain[J6] chip[244] get middle temp offset=78 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:43 remote:41 offset:33
Chain[J7] chip[244] get middle temp offset=33 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:43 remote:43 offset:31
Chain[J8] chip[244] get middle temp offset=31 typeID=55
miner rate=9001 voltage limit=940 on chain[5]
get PIC voltage=830 on chain[5], check: must be < 940
miner rate=9001 voltage limit=940 on chain[6]
get PIC voltage=830 on chain[6], check: must be < 940
miner rate=9001 voltage limit=940 on chain[7]
get PIC voltage=830 on chain[7], check: must be < 940
Chain[J6] set working voltage=830 [193]
Chain[J7] set working voltage=830 [193]
Chain[J8] set working voltage=830 [193]
setStartTimePoint total_tv_start_sys=2035 total_tv_end_sys=2036
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=84.1370 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=78
Chain[5] Chip[62] local Temp=49
read failed on Chain[5] Chip[62] middle Temp old value:63
Special fix Chain[5] Chip[62] middle Temp = 64
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=33
Chain[6] Chip[62] local Temp=47
Chain[6] Chip[62] middle Temp=24
Special fix Chain[6] Chip[62] middle Temp = 62
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=31
Chain[7] Chip[62] local Temp=47
Chain[7] Chip[62] middle Temp=25
Special fix Chain[7] Chip[62] middle Temp = 62
Done read temp on Chain[7]
Set fixed fan speed=73
FAN PWM: 73
read_temp_func Done!
CRC error counter=0
