 Show Posts
|
|
Pages: [1] 2 »
|
WTF with SG uray pool ? 5 burst for 7 hours with 17To with many block founds...  there are problem with restored balance & share data from previous hosting it has been fixed, sorry about this, i will compensate by transfering burst to pool balance Uray, were there issues on the US pool as well? |
|
|
|
burstcoin.io US pool updateminers on burstcoin US pool, please restart your miner after block 17160 (if ur miner does not have auto resolve dns) new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io (you might need to flush your dns cache) i moved pool to new hosting, and i reduced pool fee from 2.5% to 1.5%, so better profit for miners and pool running cost is reduced 4x cheaper, so BCPT holder would get better profit too new host hardware is cheaper but faster, so will see performance improvement there EU and SG pool also will follow the hosting migration, it might take a while because new hosting deployment is a bit complicated server migration is done for US, EU and SG pool you might need to restart your miner and flush dns cache, please check it Pool IP : [US] http://pool.burstcoin.io 23.227.167.164 [SG] http://pool2.burstcoin.io 23.227.163.49 [EU] http://pool3.burstcoin.io 23.227.167.165 Should I change the domain name in my miner? new Pool IP will be 23.227.167.164 , domain name will be same http://pool.burstcoin.io or http://burst-pool.cryptoport.io (you might need to flush your dns cache) |
|
|
|
Still got problems with mining I got one machine working fine now. However 2nd machine and exct same info getting following errors still.  Any advise and help to solve problem would be good. Thanks in advance Installing latest C++ Dist. fixed mine. |
|
|
|
[miner]Changed the way to work with the server now uses asynchronous transmission-reception. Immediately after finding the best deadline, miner sends it to the pool (blue). Poole sets deadline in the queue for processing and after processing sends a confirmation (green). Added the ability to use a local wallet for network scan the changed block (recommended). "UpdaterAddr" : "localhost",
"UpdaterPort": 8125, you can enter any IP address. Added parameter "Debug" - for paranoic mode  Tested for Uray's pool. Dev's pools did not support yet. new libs in zip-file: msvcr120d.dll msvcp120d.dll src: https://github.com/Blagodarenko/miner-burst Blago, do not see the new files in the zip? |
|
|
|
I hoped for an easy to use GUI. iam starring at folders with no clue what to do.not remotely. Now after skipping through all the threads,i still cant get a cmd line together. Would somebody please give me a cmd line with x y variables ? Page 29 in the ANN thread was a frustrating read through.i barely got that you use ur HDD to mine  (shame on me) Help much appreciated already we have our own forum, and specific mining section here https://burstforum.com/index.php?forums/mining-support.5/you should find easier to find out there, and also you can ask on the forum too The site also has chat now as well. |
|
|
|
Any reason for the wallet to be stuck at block 19609?
Wallet version? |
|
|
|
WTF burst, Y U NO rise.
Seriously everything this coin can is loosing value.
Nobody gives a shit about Burst, i will not sell my coins, because iīm still hoping itīs going up, but i donīt think so.
i recall such things in regards to bitcoin long ago. That being said, BURST may not make it. There are so many coins released every day now, that everyone wants to get rich quick, pump dump and move on. This coind does have a lot of support behind it, but as I have said before, I think it is a long term hold. I try to help the community here as much as I can, and I will not discourage anyone from this coin. But if it is quick profits that people are looking for, this probably is not the project for them. Cheers! Omega |
|
|
|
New update Miner-BURST-1.141014 * rewrote the sorting code + added output messages of checks + added rainbow and fun + added debug parameter ! during the tests was not found differences in deadlines ! better use "CacheSize" => your max stagger limits: 1000 files in 1 path (folder) max paths = 24 Sender's array of best deadlines = 2400000 https://www.dropbox.com/s/9so0bo71wg6nf3k/miner-burst-1.141014.zip?dl=0Awesome work Blago! I was checking your github for an update. It was kind of luck that I stumbled upon it here today. Thank you! ! File "16208505166897672442_0_7320000_3000" file name/size mismatch, skipped Any help on this error? Thanks! |
|
|
|
Hi guys, I would like to try BURST. Can somebody send me a starting amount to be able to activate my account ? :-)
BURST-PL8R-32XD-GAYL-4N2DR
Many thanks in advance,
Martin
Sent! |
|
|
|
50% drop since I last bought BURST. HDD mining might not be on demand yet, I still see big solutions coming ahead with CPUs similar to what magi has been working on in the last few weeks. Except without worrying about hdd issues as others have discussed here.
I think a lot of the issues with HDD mining have been made more complex by a few factors. The first people rushing to mine without taking the time to learn how to set it up correctly. The second, trying to tweak settings to unreal expectations. I currently am running 15 rigs, with various operating systems, and some on 10 year old servers, with 10 year old hard drives. This being said, I have had one drive fail, and it was more than likely going bad when I installed it in the host. To comment on the price, this coin is still fairly new, and it has a strong community, and a a solid dev behind it. One of the things that is hurting all crypto's is the amount of coins released daily, and all the pumps and dumps. I have felt BURST would be a mid to long term hold since it was introduced. The coin is going to have to maintain through all the FUD, and price swings, that come from an easily manipulated market. I think there many more good things coming from this coin, the main thing is to keep a solid community behind it, and an active dev. i do not think it is a good choice if you want to "get rich quick". I say this as I think about all the pizza's bitcoin bought. I think as a community we need to focus more on implementation at this point, here and on the burtstcoin forum. My 2 BURST's Omega |
|
|
|
Seriously if you guys don't stop about your mining related posts, no one will buy your mined BURST anymore. Trying to find some useful infos here and all you can see: MINING, PLOTTING. Haizz.
Very well organized site here https://burstforum.com |
|
|
|
Hi burst follower!!!
any ideas about recent price fall?
for first i think was for btc fall... but now i do not think so: btc stop is fall, but not burst...
any ideas about it?
The problem is new investors coming in the thread and only see about mining-related discussion. Hard to find useful information in the thread now. I doubt they will buy if it continues. All very organized |
|
|
|
Pool says
Using your browser go to
http://127.0.0.1:8125/rewardassignment.html
on the bottom ( see "Set reward recipient" )
Put your account secret passphrase there (the one you use to login into your wallet)
set recipient as
16434009311448803259But I got this warning: {"errorCode":5,"errorDescription":"Unknown account"} How to continue? You'll need 1 BURST to set reward recipient. This Burst can be obtained from one of the faucets listed in the top post of this thread. Seriously again ? Newbie, don't troll this thread more with your limited knowledge. No more mining, please. Create a new thread for mining related posts and the dev will be happy to add the new thread to the OP. You may also find tons of support and organized knowledge at https://burstforum.com |
|
|
|
Can someone please help me out with 1 BURST to start pool mining?
Thanks in advance! Here's my address:
BURST-TTED-MDS7-LHGL-7KE59
sent! |
|
|
|
[quote author=Blago link=topic=731923.msg9065191#msg9065191 date=1412335711]
[b]Update miner-burst-1.141003[/b]
https[Suspicious link removed] -config your_conf_file_name Fixed: * Memory leaks * Exceeding the boundaries of data * 100% usage CPU at idle, now 1% Posted on: + Configuration file (JSON format) + Sort the found deadlines before being sent to the server + Alignment deadlines for targetDedline + Parameter -config your_conf_file_name Removed: - Support for Dev's pools (temporarily) miner.conf: "Mode" : "pool" or "solo" "Server" : address or IP server's "Paths":["C:\\pocminer_v1-burst\\plots","D:\\pocminer_v1-burst\\plots","E:\\pocminer_v1-burst\\plots","G:\\pocminer_v1-burst\\plots","H:\\pocminer_v1-burst\\plots","F:\\plots"], "CacheSize" : 100000 (how many nonces calculate) "ShowMsg" : false (show server's messages) "ShowUpdates" : false (show server's update-messages) "UseSorting" : true (sorting deadlines before sending) "SendInterval": 300 (in ms, time interval for sending) "UpdateInterval": 3000 (in ms, time interval for updating) Notes: In the absence of parameters used default values. Tested at Uray's pools & solo. Don't set SendInterval & UpdateInterval too low In "pool" mode miner have not deadlines limit, if server not support targetDedline In "solo" mode deadlines <= 10 days (864000s) [/quote] I would like to try your miner, however I get multiple dll errors on Windows Server 2008 R2, any advice? |
|
|
|
yes ,remember ,this is the first poc coin, very creative
yea  any new features give to public more intresting to this coin This coin is truly a new concept which has a lot of support. I as well as many others do however realize the original thread is kind of all over the place. With this being said, please come an join our community at https://burstforum.com/ , the information is a lot more organized and there is a lot of support. By no means am I taking anything away from this thread, but the forums are a huge help as well. Omega |
|
|
|
Are 3000-3500 bursts a day normal for 6TB?
have 6 tb too and have only 1200 coins daily so ye with 3000 you are pretty lucky Good to know, im wondering, the pool is pretty stuffed, every 2-3 submitting fail. Maybe i try another one, with better performance. Is there any server, that donīt fails every 2 tasks? |
|
|
|
Dude, that pool is so lame that, apart from having a Dynamic DNS entry (running on an ISP, not on a stable host) the "How To" page still points to uray's address. If a so-called "pool operator" does not have the time or knowledge to change that... don't waste our time. If you don't want to join don't join but don't spread fud. The fact that I am on a ddns means that I am hosting the pool miself. Not on a datacenter 3000 Km away. And that if something goes wrong I have the server here and I can tend to it. Saying that its not stable... Do you know that? Have you been pinging my pool 24/7 and you got time outs? I don't get it. If you didn't use it how do you know its not stable? What defines a stable host for you? My hardware is as stable as it can get. Uray's link was there because I replaced all the files but forgot to delete that part. Happy now? Pleased with your pool, I am migrating my miners over through the day. +1 |
|
|
|
Should my conf file look like this? { "poolUrl" : "127.0.0.1:8125 burstpool.ddns.net:8124", "submissionMaxDelay" : 30, "submissionMaxRetry" : 3, "socketTimeout" : 60, "plots" : [ "c:\\pocminer_v1\\plots", "c:\\plots" ] } *Note: If I take the localhost out I get the passphrase error in the miner. I have no passphrases in the miner. Please advise. thanks! |
|
|
|
Come on people. Plenty of room left http://burstpool.ddns.netSet your reward recipient to BURST-7CPJ-BW8N-U4XF-CWW3U and start mining I'd give it a shot... but I'm not sure my plots are plotted correctly... :-/ If you mined another pool and it worked. It will work here too Well I mean all my deadlines seem to be in the millions and billions. You don't want useless shares, do you? (see post at the top of the page) Unless I'm misunderstanding... I am not sure, but I think that doesn't represent the deadline. Well I tired with my java pool miner from dev's v2 pool and the windows miner you have in your "how it works" section and both give me a "null" error. :-/ null error here as well |
|
|
|
|
