192.7 stopped working with latest and older versions few days ago. Working only for first ~30min, then stops. Dev-fee server problem? Same with different pools.

In my situation that bug with online services is not fixed in 10.0.0.2, took 1 min to see that it is still doing same. Even after Awesome Miner restart the list of online services is not on top, but somewhere in the middle of window and i have to scroll it every time to top.

Hi, i tried --stale=300 and it does not help, still too much rejects compared to 2.2c.

after 10.0.0 online services became problematic. If you leave that list open for few hours, it will autoscroll down and if you want to scroll it back to top like it was always with previous versions, you have to use mouse scroll or "page up" key, for example "home" key is doing nothing, ideally it should scroll services list to top without use "page up" key.

and still too much stales/rejects with 2.4d like with 2.3c when mining 125.4, so, back again to 2.2c

Of course i tried without any oc settings. Like i said, previous version starts fine with same command line (without --minimum), but this new one not. I run miniz from bat file with loop command, and it will open one more window for miniz, but it will be closed right after miniz it triying to select gpu, then again open new window and will not stop until bat with loop command is closed manually.

Tried with other rig, same story - exiting right after selecting gpu:

************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver:      528.49
Algo:      [Equihash125,4] [smart-pers]
Pool#0:    user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1:    user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging::    file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation:   ocX[0]
Temp. limit:   [90 C]
[INFO   ] Mining fee set to 2.00%
[INFO   ] Applying clocks to GPU[00] core offset= +240MHz mem offset=   +1MHz power=  0W gpuclk=1560
miniZ<Equihash125,4+pyrin>[19:0:00.0: 7113]: Selecting GPU#0[0] ASUS GeForce RTX 3070

mining just pyrin or 125.4 is working fine, but not together.

Here:

miniZ.exe --url=btc.5950x@zelhash.auto.nicehash.com:9200 --url2=btc.5950x@pyrinhash.auto.nicehash.com:9200 --pass=x --priority=1 --telemetry=0 --minimal --logfile miniz-pyrin-125.4-nice.log --gpuclock=1560 --fanspeed=42 --fantemp=65 --gpuoffset=240

lets hope it can be fixed fast

Hi, did not had time to check 125.4 with new version, but tried 125.4 + pyrin and it does not work. Is it me or something else?

************ miniZ v2.4d ************
Number of miniZ CUDA>=[.] using driver CUDA[12.00] devices found: 1
Driver:      528.49
Algo:      [Equihash125,4] [smart-pers]
Pool#0:    user[xxx.5950x] server[zelhash.auto.nicehash.com] port[9200] ssl[no] var[ZelProof]
Pool#1:    user[xxx.5950x] server[pyrinhash.auto.nicehash.com] port[9200] ssl[no] var[pyrin]
Logging::    file[miniz-pyrin-125.4-nice.log] period[10] delay[0]
Optimisation:   ocX[0]
Temp. limit:   [90 C]
[INFO   ] Mining fee set to 2.00%
[INFO   ] Applying clocks to GPU[00] core offset= +240MHz mem offset=   +1MHz power=  0W gpuclk=1560
miniZ<Equihash125,4+pyrin>[18:0:00.0: 9087]: Selecting GPU#0[0] Gigabyte RTX3080 Gaming OC 10G

It is crashing right after selecting gpu. Tried with 2.3c and it does start mining, but it is mining 125.4 only and does not show anything about pyrin?

Too many rejects with 2.3c mining 125.4, back to 2.2c and again 0 rejects. Kernel number is shown like "0019", not "19" like with older versions and because of this console window looks very messy with multigpu rigs -> info per gpu does not feet to one line like it was before, now it takes two lines, that second one is almost empty.

1. i'm using Online services only, nothing else.
2. yes, options -> profitability -> algorithms
3. yes
4. Online services is not updating with new values after pressing ok, if i wait for few minutes, it will be updated, "update now" usually is doing nothing like it did (always) with older versions and if i dont want to wait, i have to restart awesome miner. This works 100%.

Thanks.

yep, autofan is not very good compared to other miners.

one more bug: --gpuoffset is not working at all with 3070 ti, but working fine with 3060 ti, 3070, 3080, driver 528.49.

Sometimes from the end of 2022, there is annoing bug, was waiting maybe it will be fixed, but no. Go to settings-algorithms, select some coin with custom hashrate specified, change it to something else, press ok. Now, you will not see your new specified hashrate/profitability, but older settings. If you want to see your new updated settings, you have to wait or you can press "update now" 10 times or more, does not help, only restarting awesome miner will help.

With zerg/192.7 worker name in format wallet.worker sometimes works, sometimes not. Showing btc wallet instead of worker name when not.

i dont adjust intensity at all when it was working, with cpu pow hash rate is higher. This is from release notes:

A part of POUW work that was done on the CPU's is now done on GPU side. This unfortunately comes with a penalty : less hashrate. If you have a good CPU which can run all your cards without issues, then add the --dynex-cpu-pow parameter
and the additional work will again be calculated on the CPU side.

gtx 1070 stopped working completely with 2.2.4 - crashing on init, lowering intensity does not help, back to 2.2.3. --dynex-cpu-pow 0 stil not working with rx 5700, even with lower intensity.

2.2.2 and 2.2.3 is crashing on gpu initializing after adding --dynex-cpu-pow 0. If i remove it, srbminer starts fine.
RX 5700 XT, win 10 with latest driver.

192.7 worker name is lost sometimes for zergpool, but not always, here you can see how it looks (same rig, with few manual restarts for gpu freqs adjustments):

miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.1795565   22.4h/s   4
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.2   11.2h/s   0
miniZ/2.0c 1Lcc*************   c=BTC   equihash192   0.13930256   22.4h/s   3
miniZ/2.0c 3700x   c=BTC   equihash192   0.2   11.2h/s   0

with 2.0c msi 3060 ti still detected as 3070:

************ miniZ v2.0c ************
Number of miniZ CUDA>=[.] using driver CUDA[11.30] devices found: 3
Driver:      466.77
Algo:      EQ[192,7] [smart-pers]
Pool#0:    user[1Lcc***************.5600x]
      server[equihash192.eu.mine.zergpool.com] port[2144] ssl[no] pers[auto]
Logging::    file[miniz-192.7-zerg.log] period[10] delay[0]
Temp. limit:   [90 C]
[INFO   ] Mining fee set to 2.00%
miniZ<192,7>[19:0:00.0: 7161]: Selecting GPU#2[2] MSI GeForce RTX 3070 8GB Gaming X Trio
miniZ<192,7>[19:0:00.0: 7132]: Selecting GPU#1[1] MSI GeForce RTX 3070
miniZ<192,7>[19:0:00.0: 7161]: Selecting GPU#0[0] ASUS GeForce RTX 3060 Ti
[ 0d 0h 0m09s|16:52:17 14/02/2023] S:  0/0/0 136(135.8)Sol/s 380(380.2)W [ZcashPoW]- 101ms
 0>RTX 3060 Ti  [19] S:  0/0 [62 C/56%] 19.09 I/s 38.08(38.08)Sol/s 114(113.5)W clk=1560MHz mclk=5000MHz Sol/W=0.335
 1>RTX 3070     [19] S:  0/0 [61 C/55%] 27.02 I/s 53.91(53.91)Sol/s 129(129.3)W clk=1560MHz mclk=5000MHz Sol/W=0.417
 2>RTX 3060 Ti  [19] S:  0/0 [62 C/35%] 21.98 I/s 43.84(43.84)Sol/s 137(137.4)W clk=1560MHz mclk=5000MHz Sol/W=0.319

2.0b mined dev fee for almost 13 hours until miniz window was closed manually.

[ 0d 0h 3m00s|05:24:52 25/12/2022] S: 29/0/0 241(240.9)Sol/s 429(429.0)W [BitcoinZ]- 57ms
 2>RTX 3080     [16] S: 15/0 [67 C/85%]*76.89 I/s 152.54(152.54)Sol/s 270(270.3)W clk=1575MHz mclk=9501MHz Sol/W=0.564
 3>RTX 3060 Ti  [17] S: 14/0 [67 C/91%] 44.55 I/s  88.72( 88.72)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.559
[ 0d 0h 3m10s|05:25:02 25/12/2022] S: 30/0/0 241(240.9)Sol/s 429(429.0)W [BitcoinZ]- 58ms
 2>RTX 3080     [16] S: 15/0 [67 C/85%] 76.89 I/s 151.78(151.81)Sol/s 270(270.4)W clk=1575MHz mclk=9501MHz Sol/W=0.561
 3>RTX 3060 Ti  [17] S: 15/0 [67 C/91%]*44.55 I/s  88.46( 88.46)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.558
[ 0d 0h 3m20s|05:25:12 25/12/2022] S: 30/0/0 240(240.2)Sol/s 430(429.1)W- 36ms
 2>RTX 3080     [16] S: 15/0 [66 C/92%] 76.89 I/s 152.09(152.09)Sol/s 271(270.5)W clk=1575MHz mclk=9501MHz Sol/W=0.562
 3>RTX 3060 Ti  [17] S: 15/0 [67 C/91%] 44.55 I/s  88.21( 88.23)Sol/s 159(158.6)W clk=1560MHz mclk=7000MHz Sol/W=0.556

.......

[ 0d12h51m30s|18:13:22 25/12/2022] S: 30/0/0 241(242.4)Sol/s 431(430.6)W- 48ms
 2>RTX 3080     [16] S: 15/0 [66 C/90%] 76.89 I/s 152.57(153.43)Sol/s 271(271.8)W clk=1575MHz mclk=9501MHz Sol/W=0.564
 3>RTX 3060 Ti  [17] S: 15/0 [68 C/90%] 44.55 I/s  88.29( 88.91)Sol/s 159(159.0)W clk=1560MHz mclk=7000MHz Sol/W=0.559

--priority is still broken and not working at all, win10 with admin rights.

1. --priority is not working with win10 + admin rights.

2. MSI GeForce RTX 3060 Ti GAMING Z TRIO 8G is detected as 3070

miniZ<144,5>[17:0:00.0: 7161]: Selecting GPU#0[0] MSI GeForce RTX 3070 8GB Gaming X Trio
miniZ<144,5>[17:0:00.0: 7161]: Selecting GPU#1[1] ASUS GeForce RTX 3060 Ti
[ 0d 0h 0m02s|08:46:30 17/12/2022] S:  0/0/0 166(166.3)Sol/s  89( 89.0)W [BgoldPoW]- 36ms
 0>RTX 3060 Ti  [17] S:  0/0 [46 C/30%] 44.45 I/s 88.67(88.67)Sol/s  45( 44.5)W clk=1590MHz mclk= 810MHz Sol/W=1.992
 1>RTX 3060 Ti  [17] S:  0/0 [45 C/53%] 38.92 I/s 77.64(77.64)Sol/s  44( 44.5)W clk=1590MHz mclk=7000MHz Sol/W=1.746

I'm alone with problem that Awesome miner does not show any statistics for kaspa (nicehash)? I did put my rig speed for kaspa in settings-algorithms, but still same. Settings in "online services" for nicehash-kaspa is fine, id 62 is fine, cant find what is wrong.