Show Posts
|
Pages: [1]
|
@Gazzasilver: just delete everything in your ~\AppData\Roaming\Cryptonite folder start fresh. Backup your wallet.dat file first if you have any coins. If you still have problems after that you'll need to create the cryptonite.conf file and add some of the nodes posted earlier.
All good now thankyou I had to restart twice but all good now
|
|
|
every time I check the characteristics of mini-blockchain system I think is really amazing.  Hi, I'm new to Cryponite, downloaded the wallet and extra on Windows 7 64bit. Ran it, but it always locks up on 6 days under the point "Downloading Header". I don't know a lot about this stuff and was wondering if anyone had newbie fix tips for this problem? I added a config file and tried re downloading the Blockchain. Thank You Hi, try to delete the blockchain, then add some nodes to .conf file and run the client cryptonite. addnode=108.61.198.119 addnode=108.61.199.81 addnode=108.61.199.112 addnode=49.69.151.15:8253 addnode=91.147.186.68:8253 addnode=183.129.171.156:8253 addnode=210.64.51.11:8253 addnode=125.115.65.192:8253 addnode=83.212.114.217:8253 addnode=58.220.3.208:8253 addnode=106.120.221.254:8253 addnode=101.165.44.224:8253 addnode=176.37.21.175:8253 addnode=90.57.164.208:8253 addnode=195.47.113.76:8253 addnode=77.58.253.73:8253 addnode=83.248.223.155:8253 addnode=47.20.213.131:8253 addnode=117.33.220.204:8253 addnode=187.55.221.174:8253 addnode=206.72.193.148:8253 addnode=148.251.14.212:8253 addnode=37.157.179.59:8253 addnode=47.55.147.150:8253 addnode=210.186.149.241:8253 addnode=58.58.56.226:8253 addnode=92.234.72.146:8253 addnode=119.81.51.10:8253 addnode=47.55.147.150:8253 addnode=174.6.46.186:8253 addnode=217.129.141.209:8253 Good luck. Hi All My wallet isn't updating I have added all the above Address's Its now 2 weeks behind and does not seem to be updating at all any help would be most welcome Cheers Hello, Close the program, Remove the addresses you added from the conf file, Delete "peers.dat" file, Start the program again and wait. That worked for me. Where do you find the Config file ? I searched and found -Alienware\AppData\Roaming\Cryptonite but no config file I deleted the peers dat file and restarted anyway I thought you added them through the cryptonite.conf file. "cryptonite.conf" is not there by default. What you did should be enough, But if you want to do more work, You should forward port 8253 to your PC's local IP Address. Its been running Many hours now and No updates at all I do have connections I have added the port to port forward and I am getting incoming and outgoing traffic But no updating at all Here are the last few errors in the debug log prev=000000000582a484b49667db868f2a2678ce0dd3f6399d05be7ca5c2eddb8812 2014-12-27 04:03:22 ProcessBlock: ORPHAN BLOCK, prev=0000000003e012a97de30a1c31f70b3f728f4f925ee7bb075f95a5cadc203551 2014-12-27 04:03:34 socket recv error 10054
|
|
|
every time I check the characteristics of mini-blockchain system I think is really amazing.  Hi, I'm new to Cryponite, downloaded the wallet and extra on Windows 7 64bit. Ran it, but it always locks up on 6 days under the point "Downloading Header". I don't know a lot about this stuff and was wondering if anyone had newbie fix tips for this problem? I added a config file and tried re downloading the Blockchain. Thank You Hi, try to delete the blockchain, then add some nodes to .conf file and run the client cryptonite. addnode=108.61.198.119 addnode=108.61.199.81 addnode=108.61.199.112 addnode=49.69.151.15:8253 addnode=91.147.186.68:8253 addnode=183.129.171.156:8253 addnode=210.64.51.11:8253 addnode=125.115.65.192:8253 addnode=83.212.114.217:8253 addnode=58.220.3.208:8253 addnode=106.120.221.254:8253 addnode=101.165.44.224:8253 addnode=176.37.21.175:8253 addnode=90.57.164.208:8253 addnode=195.47.113.76:8253 addnode=77.58.253.73:8253 addnode=83.248.223.155:8253 addnode=47.20.213.131:8253 addnode=117.33.220.204:8253 addnode=187.55.221.174:8253 addnode=206.72.193.148:8253 addnode=148.251.14.212:8253 addnode=37.157.179.59:8253 addnode=47.55.147.150:8253 addnode=210.186.149.241:8253 addnode=58.58.56.226:8253 addnode=92.234.72.146:8253 addnode=119.81.51.10:8253 addnode=47.55.147.150:8253 addnode=174.6.46.186:8253 addnode=217.129.141.209:8253 Good luck. Hi All My wallet isn't updating I have added all the above Address's Its now 2 weeks behind and does not seem to be updating at all any help would be most welcome Cheers Hello, Close the program, Remove the addresses you added from the conf file, Delete "peers.dat" file, Start the program again and wait. That worked for me. Where do you find the Config file ? I searched and found -Alienware\AppData\Roaming\Cryptonite but no config file I deleted the peers dat file and restarted anyway
|
|
|
every time I check the characteristics of mini-blockchain system I think is really amazing.  Hi, I'm new to Cryponite, downloaded the wallet and extra on Windows 7 64bit. Ran it, but it always locks up on 6 days under the point "Downloading Header". I don't know a lot about this stuff and was wondering if anyone had newbie fix tips for this problem? I added a config file and tried re downloading the Blockchain. Thank You Hi, try to delete the blockchain, then add some nodes to .conf file and run the client cryptonite. addnode=108.61.198.119 addnode=108.61.199.81 addnode=108.61.199.112 addnode=49.69.151.15:8253 addnode=91.147.186.68:8253 addnode=183.129.171.156:8253 addnode=210.64.51.11:8253 addnode=125.115.65.192:8253 addnode=83.212.114.217:8253 addnode=58.220.3.208:8253 addnode=106.120.221.254:8253 addnode=101.165.44.224:8253 addnode=176.37.21.175:8253 addnode=90.57.164.208:8253 addnode=195.47.113.76:8253 addnode=77.58.253.73:8253 addnode=83.248.223.155:8253 addnode=47.20.213.131:8253 addnode=117.33.220.204:8253 addnode=187.55.221.174:8253 addnode=206.72.193.148:8253 addnode=148.251.14.212:8253 addnode=37.157.179.59:8253 addnode=47.55.147.150:8253 addnode=210.186.149.241:8253 addnode=58.58.56.226:8253 addnode=92.234.72.146:8253 addnode=119.81.51.10:8253 addnode=47.55.147.150:8253 addnode=174.6.46.186:8253 addnode=217.129.141.209:8253 Good luck. Hi All My wallet isn't updating I have added all the above Address's Its now 2 weeks behind and does not seem to be updating at all any help would be most welcome Cheers
|
|
|
Ok so how do I add my old Wallet key address to the new Wallet ?
I assume it will be done through the Console
But what is the correct method?
Is anyone able to show me how to do this through the console ?
|
|
|
Ok so how do I add my old Wallet key address to the new Wallet ?
I assume it will be done through the Console
But what is the correct method?
|
|
|
Wallet address, private key and wallet password are three completely different things. As far as I see you didn't use your private key. And also make sure you don't post it here, because it would be ... an interesting giveaway  Thats just my Wallet address But now Heavy wallet says its not a valid address I uninstalled it and have started again
|
|
|
Well its all updated But all my mined Coins Were flashing in as it was updating
But when all updated Coin amount is Zero and no transaction records at all
Any ideas with this one??
I don't know. Were the coins mined in a pool or solo? It sounds like did solo mine on a fork or something... you really need somebody more experienced to talk with... No mined through 1Gh Pool Quite odd as I was updating all my coins were coming in But now Zero 44.3405 HVC Paid into my account but nothing showing in my wallet Ok I worked something out the address I used when I first started mining has disappeared from my wallet This the address that was in my Wallet when I first installed it HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb and Im mining into But now the only receive address in my wallet now is HBCkA5jNxUBpgdB1BVEzRhSMEkevKahEKT So this wallet is not safe it seems is there a way to put my receive address back in my wallet ?? Ok I have found in the Console a command to find lost keys I have tried it many different ways but it just says method not found Can someone please show me the correct way to put this command in  -salvagewallet=HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb Ok I have tried this method but it says this  importprivkey HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb Heavy#1  Invalid private key (code -5) How can it be an invalid key when it was the HeavyCoin Wallet that made it in the first place This has got me stumped
|
|
|
Well its all updated But all my mined Coins Were flashing in as it was updating
But when all updated Coin amount is Zero and no transaction records at all
Any ideas with this one??
I don't know. Were the coins mined in a pool or solo? It sounds like did solo mine on a fork or something... you really need somebody more experienced to talk with... No mined through 1Gh Pool Quite odd as I was updating all my coins were coming in But now Zero 44.3405 HVC Paid into my account but nothing showing in my wallet Ok I worked something out the address I used when I first started mining has disappeared from my wallet This the address that was in my Wallet when I first installed it HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb and Im mining into But now the only receive address in my wallet now is HBCkA5jNxUBpgdB1BVEzRhSMEkevKahEKT So this wallet is not safe it seems is there a way to put my receive address back in my wallet ?? Ok I have found in the Console a command to find lost keys I have tried it many different ways but it just says method not found Can someone please show me the correct way to put this command in  -salvagewallet=HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb
|
|
|
Well its all updated But all my mined Coins Were flashing in as it was updating
But when all updated Coin amount is Zero and no transaction records at all
Any ideas with this one??
I don't know. Were the coins mined in a pool or solo? It sounds like did solo mine on a fork or something... you really need somebody more experienced to talk with... No mined through 1Gh Pool Quite odd as I was updating all my coins were coming in But now Zero 44.3405 HVC Paid into my account but nothing showing in my wallet Ok I worked something out the address I used when I first started mining has disappeared from my wallet This the address that was in my Wallet when I first installed it HEDjhhEnqRT1ARsm2XA2q4PHfFYuAwqNLb and Im mining into But now the only receive address in my wallet now is HBCkA5jNxUBpgdB1BVEzRhSMEkevKahEKT So this wallet is not safe it seems is there a way to put my receive address back in my wallet ??
|
|
|
Well its all updated But all my mined Coins Were flashing in as it was updating
But when all updated Coin amount is Zero and no transaction records at all
Any ideas with this one??
I don't know. Were the coins mined in a pool or solo? It sounds like did solo mine on a fork or something... you really need somebody more experienced to talk with... No mined through 1Gh Pool Quite odd as I was updating all my coins were coming in But now Zero
|
|
|
But I don't understand where do you put these addnodes ? I tried in the console but no luck there
I see that you tried the console in heavycoin-qt.exe My guess is that you didn't write it correctly. Try to add the lines like: Add like that all the nodes from the list and wait 10 minutes. You should start getting connected. Great that worked in the Consol its updating and added my mined coins straight away Thank You Well its all updated But all my mined Coins Were flashing in as it was updating But when all updated Coin amount is Zero and no transaction records at all Any ideas with this one??
|
|
|
But I don't understand where do you put these addnodes ? I tried in the console but no luck there
I see that you tried the console in heavycoin-qt.exe My guess is that you didn't write it correctly. Try to add the lines like: Add like that all the nodes from the list and wait 10 minutes. You should start getting connected. Great that worked in the Consol its updating and added my mined coins straight away Thank You
|
|
|
addnode=5.9.97.243:7203 addnode=119.81.51.10:7203 addnode=128.199.180.150:7203 addnode=80.241.218.9:7203 addnode=195.154.86.11:7203
But I don't understand where do you put these addnodes ? Any ideas please Gaz Create a Heavycoin.conf file with all the above addnode=... & place it inside C:\Users\YourUsername\AppData\Roaming\Heavycoin Yes I made a conf file and ran Heavycoind but it flashes up with some error and not long enough to read it Not exactly plug and Play this one I see it says error blaa blaa blaa thats about it It just doesn't stay there long enough to read it Should I uninstall and start again???
|
|
|
I have downloaded the windows wallet and it still says no connections after about 4 hours. I have added the nodes specified at the beginning of the forum plus a few more I found throughout the forum that people have posted but still no luck.. Could someone send me there peer list or give me active nodes.
Thanks
Try these: addnode=5.9.97.243:7203 addnode=119.81.51.10:7203 addnode=128.199.180.150:7203 addnode=80.241.218.9:7203 addnode=195.154.86.11:7203 Mine isnt updating either But I don't understand where do you put these addnodes ? I tried in the console but no luck there I also see the add uPnP is greyed out ? Any ideas please Gaz
|
|
|
|