 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
I wound up ordering a new board off of ebay and everything works now. I may try to salvage the old board with an sd card but the machine is running. Thanks for all the input
|
|
|
|
This is my oldest t17. I bought it off ebay in august and dont even want to admit what I paid for it. I was running fine until yesterday when I hooked up 4 new ones that were delivered. I tried everything philipma1957 recommended but nothing worked, but thank you for the suggestions. Ive tried letting it run for a bit 2-10 minutes and using the reset button but that does nothing Ive tried the IP reporting button, but not for 15 seconds, I'll try that next time and see if that works. Im going to check the warranty but think its going to be close. I uploaded a video to shows what its doing, thats is all just stay like this. Smash that like button,jk. https://www.youtube.com/watch?v=G4VIaTRIBLY |
|
|
|
|
I run about 50 machines and this is the first time Ive had a problem with one. I use angry IP scanner plus it was assigned a static IP. I waited more than 5 minutes prob more. I am going to go back to my shop and mess with again, but Im concerned the board may have went
|
|
|
|
|
I have a T17 40th thatn when it power it on both the red light and the green light both constantly stay on and never starts hashing or obtains an IP address. I have tried to reset it from the machine but it wont reset. Any suggestions would be really appreciated.
|
|
|
|
This was from the batch in January that I just received in the last few weeks. Thanks, I hoping there was a magic fix. I'll prob just wait toward the end of the warranty and return it to be fixed. I just hate paying the $100+ to send back to China I have a S9 and T9 plus missing chips they do not show an "x" or "o". Can someone point me a way to get these chips running. I have updated the firmware, that didnt work. They are both under a month old. This is what my s9 screen looks like:
3m49s 10,819.24 10,792.57 0 9,101 18.60 156,685.41 576586
6 54 637.00 3,921.37 1,612.16 5 - - oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooo
7 63 650.00 4,667.64 4,656.63 0 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
8 63 639.14 4,543.43 4,550.45 1 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
Anyone who wants to dm me a solution that works I'll send a bitmain coupon
There is no magic software fix for this, you have failed hardware components. You need to RMA the boards if you want them to work fully. sorry for you, wich batch isi it please ? I've red here I think, that someone received the S9 after RMA without anything changed and with the same issues. And he had to pay once again the customs !!! Hope it wont be your case ( or mine if/when I 'll have to use RMA ) Seriously, why not allow us to send only the parts with issues when they are clearly identified ?! |
|
|
|
Thanks, I hoping there was a magic fix. I'll prob just wait toward the end of the warranty and return it to be fixed. I just hate paying the $100+ to send back to China I have a S9 and T9 plus missing chips they do not show an "x" or "o". Can someone point me a way to get these chips running. I have updated the firmware, that didnt work. They are both under a month old. This is what my s9 screen looks like:
3m49s 10,819.24 10,792.57 0 9,101 18.60 156,685.41 576586
6 54 637.00 3,921.37 1,612.16 5 - - oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooo
7 63 650.00 4,667.64 4,656.63 0 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
8 63 639.14 4,543.43 4,550.45 1 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
Anyone who wants to dm me a solution that works I'll send a bitmain coupon
There is no magic software fix for this, you have failed hardware components. You need to RMA the boards if you want them to work fully. |
|
|
|
|
I have a S9 and T9 plus missing chips they do not show an "x" or "o". Can someone point me a way to get these chips running. I have updated the firmware, that didnt work. They are both under a month old. This is what my s9 screen looks like:
3m49s 10,819.24 10,792.57 0 9,101 18.60 156,685.41 576586
6 54 637.00 3,921.37 1,612.16 5 - - oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooo
7 63 650.00 4,667.64 4,656.63 0 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
8 63 639.14 4,543.43 4,550.45 1 - 72 oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo ooooooo
Anyone who wants to dm me a solution that works I'll send a bitmain coupon
|
|
|
|
Sell POT and buy CANN soon possible 10K in coming within 10days
Cann lost half its value since then, nice call dickhead |
|
|
|
Did the second batch of the day go already? What time is that New York time if I havent missed it.
gone Thanks |
|
|
|
|
Did the second batch of the day go already? What time is that New York time if I havent missed it.
|
|
|
|
|
is there any mining pools for this anymore?
|
|
|
|
|
Is the rapper guy no longer part of the project, that wouldnt be veri veri good
|
|
|
|
I have 15 coupons to sell (-125usd for asic miners), 65$ each, accepting payment in dash, btc, ltc, zec, bch, eth.
PM for more information's.
lmao |
|
|
|
|
Same thing with 3 tickets over the last 2 months
|
|
|
|
|
any suggestion on how to get my 540,000 xcn off of Polo?
|
|
|
|
PIVX is way undervalued, it should worth $100 now.
It should be worth a trillion. Right? |
|
|
|
Hashrates for r9 390 and r7 370 using Claymore?
do you have an working amd miner? claymore xcn amd do not work on suprnova. I didn't know that, I was thinking about switching my machines to it. So I guess I really cant mine this. |
|
|
|
|
Hashrates for r9 390 and r7 370 using Claymore?
|
|
|
|
|
Any idea how to get coins off Polo. I have a 30 day support ticket they have not responded to
|
|
|
|
|
