Thanks Dogie!  It took me a bit of time to find an image file and learn how to format and flash an SD card in Linux (Linux rookie here) but I finally got it done and the machine works great!  Now I just have to figure out how to determine what is wrong with the two hash boards that aren't working to see if I can bust out a soldering iron to fix them.....  I pulled each board out and reseated them to make sure that wasn't the issue.  I thought I saw a couple posts about people cleaning the contacts on the board so maybe I will try that too.  I didn't look close enough at the boards to see whether the boards are labeled with numbers 1-10 to correspond with the miner status page showing boards 8 and 10 that aren't hashing....are there marks somewhere?  Do I have to keep a board in all 10 slots to run the miner or can I pull the bad boards out and run it with the good boards?

Thanks again for the help!

Hi guys I was hoping someone could help me with a small issue I am dealing with.  I bought an Antminer S2 that has a couple hashboards that aren't functioning and the LCD and reset buttons aren't working anymore.  I thought that I could just plug the machine in and reset it with a browser window but I am having trouble getting the machine to pull up in a browser window....  The guy who sold it to me said that I needed to set the adapter settings on my laptop to 192.168.0.113 to get into the S2 miner and that I could change it from there.  After setting IPv4 with that information the S2 that is directly connected to the laptop does show that there is a network but when I type the 192.168.0.113 in a browser window it doesn't pull up the software so that I can reset the entire thing and start from scratch...  Do you guys know of something that I might be doing wrong?  Or is there a way I can somehow manually short two points under the broken reset button so that I can start from scratch?

I appreciate any help anyone could give me.

Thanks!