It's been several months I've been mining using Claymore (with only 1 GPU) and currently my shares are getting lower and lower due to the difficulties increase. But for the last week, my shares on dwarfpool are waaaay much lower than what Claymore shows me. As you can see on this picture attached, I should have to got apprx. 280 shares on my last 7 hours mining progress but what my pool shows is only 124 shares submited. I tried to move to another pool and it keep happens to me. I actually have 3 GPU (RX470 & RX570) and I tried each card and result are still the same. What should I do? Is it stale shares? Anyone can help me?

For all of you guys i made a custom bios from the one in the main post.
You won't need any wattool,wattman,afterbuner,trixx or any other software of that type, i set everything in the bios like Insider00 did with wattool, so :

Def gpu clock : 1144 Mhz
Def mem clock: 2150 Mhz

Mem straps 1625
VDDC (gpu voltage) set at 925mV
TDP 120w
Set fans to hold cards at about 70c, so you don't need fan regulation either

Before flashing remove ALL software that you used before for manipulating (wattool,wattman,afterbuner,trixx...).
Then clean all video drivers with DDU.
Flash bios.
Reboot, reinstall video drivers.

Test.

Enjoy

http://www.filedropper.com/s480-8gb-micron

heh sold some to get my initial investment back..

now im holding for long term... i highly recommend you hold for the long term aswell ;]


sell now cry later... ;p


best of luck to all DGB holders!


to the moon!!

Realmente houve uma falha da nossa parte, vamos melhorando e obrigado pela sinceridade!