I am using trusted and popular gmail.com service
and my username: pexum ( it was created more than 6 months ago, don't remember if I deposited or not but can not login for not recieving pincode to my email, so I created another account)
my 2nd username is : dailydesk ( I created it about 5 days ago and deposited some litecoins )
I recieved confermation mail, logged and rtecieved notification mail
but now I can not recieve pincode to my mail. last time I logged in after registration without pincode
I have whitelisted by adding support@unnamed.exchange to my contact though it was not necesary coz I always got
confermation and notification mail straight to inbox

I have account with unnamed.exchange and after I deposit some coin I can no longer login in their site because they don't send login pin to email , then I created 2nd account and after login I deposited coin and after just 6 days got the same login problem with my 2nd account

Looks like I was not active for a while, and missed the swap.
I have old trbo coin in my old wallets , is there any way to do swap or exchange them for
new trbo coin , any help any suggestion will be very much accepted and I guess few more
people are there like my situation and they may get benefited as well if there is a solution available.
thnx

This is a nice opportunity to take part in mining here as a staking with only 10 XTZ coin ,
without much effort I can start gaining part of profit share from Tezos.atticpool.com,
definitely a must try offer.

hello, just invested $5 to buy redwind coin , and $15 approximately server cost
to run a first redwind faucet for the community.

Earning cryptocoin thru faucet is not a best bet and take times but the only advantage is
you don't have any computer to occupy for mining hour after hour, rather than
visiting site every now and then to earn some dust coin and withdraw in a big sum.

let see how profitable my project and investment is.
I'll change reward amount after running my project as beta test.

  redwind coin faucet : http://redwindreward.cryptowinner.site

hey yes just surfed a bit and found electrium 2.6 to 3.0.4 was vulnerable by jsonrpc command for 2 years already.
so nothing new , my bad actually, just updated elctrium to 3.1.3 latest version as of toady. thanks

hello friends just to let the bitcoin community know that to my best knowledge I have figured out that
on 10th may 2018 I lost BTC0.00564505 bitcoin worth $50 at rate $8900 due to a hacking issue and unauthorized transaction
caused inside my electrium-2.9.3-portable version which was encrypted with 24 digits complex password.

here I want to mention that it is my 3rd created electrium account for safety reason where I used new unique
seed to create my wallet and put password on it. and that my pc is never shared with anyone, not given
for repairmen and I have up to date windows 8.1 platform with avast antivirus and up to date router
which is not easily be hacked. so hope it will be a good notification to record for inquiry.

the transaction id is : https://blockchain.info/tx/af59d8a4cf4a7f0582055b6edf0d0ffecd4072974fc8c2631e3cd3de8d3152a5

its to be noted that the hacker took all my balance at once causing my account to be turned out to be 0.

this poly ai tokens has not added to my account : https://etherscan.io/tx/0xed8c4fa2e5ef15f10582a62d491b70c9d556ef957ad66e05a99ba62d271b8595

my username is "synopsis" at poly ai thanks

I want to try Eigencoin platform , please donate to this address if possible : Cf8EnbRVqE4nQDwXgF87cGYzMjH6Y2gsmB

ty

Hi
I am newbie to cryptocurrency , and to my knowledge I know solo mining bitcoin with s5 antminer is
just a joke in 2018. But I guess its not beyond expectation for new sha256 coin that are similar to bitcoin.
so solo mining guide on own network with own pc with s5 anminer will come handy.
Here I shall try an example with eMark coin or DEM Coin.

First of all I have downloaded and synchronized eMark-qt.exe
then I have created a eMark.conf as per the suggestion found in help>console>command line option
I have created another eMark-qt.conf just for over sure and suggestion through out internet as .conf
should be similar to the name of the qt wallet here eMark-qt.xxx
my .conf file is as follows :
-----
rpcuser=eMarkuser
rpcpassword=12345
rpcallowip=*
rpcconnect=192.168.0.3
rpcport=16666
daemon=1
server=1
gen=1
listen=1
-----
rpcconnect=192.168.0.3 is my laptop ip where I am running the qt wallet as server
rpcallowip=* is any ip can connect to my laptop server such as another pc of my
localnetwork with a graphics card to mine and mainly our s5 antminer which
ip is here : 192.168.0.2

now I ran the qt wallet by creating a bat file called :servereMarkcoin.bat
with the data that inside the quote and put in the same folder
as eMark-qt.exe: "eMark-qt.exe -server"
then I doubled clicked the bat and the qt wallet popped in and ran as server
we can also do this by creating a shortcut of eMark-qt.exe somewhere and
from the shortcut poperties adding the "-server" and then clicking the shortcut
to run qt wallet as server.

now in the router I made a port forwarding by adding web service with ip : 192.168.0.3 with
the port 16666 which I selected for the eMark-qt.exe in the .conf file

now when everything is running : I opened cg miner 3.7.1 and tried to mine with my
usb block erupter it found the url and active pool an dstarted hashing
my pool is here http://192.168.0.3:16666 user -eMarkuser pass -12345
I also did it with cpuminer to mine with cpu with following info in .bat file
minerd -a cryptonight -o stratum+tcp://192.168.0.3:16666 -O eMarkuser:12345
****here http://192.168.0.3:16666 didnt work but stratum+tcp://192.168.0.3:16666 worked fine instead

NOW THE PROBLEM IS ######

I tried to login to my s5 antminer by accessing to http://192.168.0.2
and in the miner configuration neither  http://192.168.0.3:16666 works nor
stratum+tcp://192.168.0.3:16666 so how can I solo mine or connect to my laptop
is it because only asic miner that are connected to my laptop can solo mine
and as antminer is another device and my laptop is not a public pool but solo mining server
so my s5 antminer can not participate and mine?

okay , I agree that valuation requires some support from the cryptocurrency community , and as a developer
you have done all that you could. I really appreciate that the developers behind SpeedCoin SPD are very professional.

but so far : your mentioned mining pool and the currency exchange coinaccel both are inaccessible
the twitter profile of coinaccel has 1 follower and only one post that made on 2014
and the btc-e.com exchange site may be good for other currency , and I can not verify them without using
their service. but still I have one negative review about them is : they are allowing people to deposit SPD there
but in the same time they have alerted that : "This coins not yet supported by Coins-e."

by the way I was just using an old nvidia graphics card with my old desktop for testing and in the last 30+ days
I have mined over 50,000 SPD and hoping the energy I consumed with my pc and electricity may
paid back to me some day in near future.

As because your project is still active and anything can be possible and everyone who are directly involved
will be benefited for supporting this coin, in that case , of-course. but before that , can I not blame my luck
with the obsolete coins I have ?

SpeedCoin has developed a nice qt-wallet as like bitcoin and dogecoin, and their solo mining process is very
hassle-free and easy. You may see the other cryptocoin that are releasing in the market has many weakness,
such as only a minerd daemon and broken wallet system and very overloaded mining process. While speedcoin
is overcome this difficulties, but I wonder why other exchange site are not accepting them? and why it has
no value in the market. The above mentioned site is the only exchange site who are dealing with SPD against bitcoin.
But I don't think that this site is trustworthy or have a good reputation. I have deposited 1000 SPD here for testing
and it is still in the unconfirmed state for last 10 days , while they are showing some trades that took place in their
site which I guess are fake, as because the gourl.io is also connected by the owner of speedcoin.co and the coins-e.com
are suggested by them only and I found it lame. So if you invest any other currency in coins-e.com or
get involved with gourl.io for a big business aim then you may become a looser someday. As I lost 1000 SPD then may be many
other people are waiting their SPD and other currencies to be processed there , and gourl.io may discontinue at the same
way, and yep definitely there will be no value of dealing SPD with gourl.io as speedcoin is not available to exchange
, cashing out and yes no mining pool are available as well , and everyone doing the solo mining process as like they
are trying to print a dollar on a white page with their drawing instrument at home.
So no mining pool , no exchange site (rather scam one) and suspicious payment API Gourl.io everything
indicates that rather trying to improve this coin and giving us good news they are trying to become suspicious.
I wouldn't mind if I could find a single mining pool or get the coins-e.com site as an active exchange site.
LMAO

'I want to link my Bitcointalk name with BTCJam's. Verification code: 1d69d332-7124-47c7-b39e-fbba765c1dff'