Show Posts
|
Pages: [1] 2 »
|
Unfortunately nothing happened. 1. If you just run the wallet with (-addnode=91.121.221.51 -addnode=149.28.164.168). Then there is the synchronization, but then the wallet crashes and all. 2. If you copy the wallet file.dat into a new folder and re-sync (-addnode=91.121.221.51 -addnode=149.28.164.168). Then there is the synchronization, but then in my wallet and lost all the coins.
Can you explain further what happens when the wallet crashes? Is it immediate or does it occur after some time? What is the error shown? What size is your wallet.dat file? In the first case, the wallet freezes and the program does not respond to any action. Synchronization stops somewhere around 70% percent. The program "hangs" a day or more without reacting or any action. I didn't wait for it to finish and turned it off. In the second case, the wallet goes through a full synchronization, during the process, transactions are shown, but when the synchronization comes to the end, I somehow disappear all the coins. On the balance of 0 coins. File size 936 KB
|
|
|
Hi! Wallet is not synchronized, what to do?
Which version? Do you have peers connected? What is your current block height? wallet v1.3.2.0 peers 1 or 0 block 967500 in 2584429. Do you know how to set up addnodes in cloudcoin.conf? If so, see this URL: https://www.almightycoins.org/explorer/cloudcoin/peersIf not, assuming you are using the Windows client (cloudcoin-qt.exe), you can also try starting it manually from the commandline, including the addnodes: c:\path\to\cloudcoin-qt.exe -addnode=91.121.221.51 -addnode=149.28.164.16891.121.221.51 is a 24/7 server so that should be sufficient to connect to and find other peers. Hope this helps. Thank you, like helped. Synchronization is in progress, 68%. Then write, when will the end result. Unfortunately nothing happened. 1. If you just run the wallet with (-addnode=91.121.221.51 -addnode=149.28.164.168). Then there is the synchronization, but then the wallet crashes and all. 2. If you copy the wallet file.dat into a new folder and re-sync (-addnode=91.121.221.51 -addnode=149.28.164.168). Then there is the synchronization, but then in my wallet and lost all the coins.
|
|
|
Hi! Wallet is not synchronized, what to do?
Which version? Do you have peers connected? What is your current block height? wallet v1.3.2.0 peers 1 or 0 block 967500 in 2584429. Do you know how to set up addnodes in cloudcoin.conf? If so, see this URL: https://www.almightycoins.org/explorer/cloudcoin/peersIf not, assuming you are using the Windows client (cloudcoin-qt.exe), you can also try starting it manually from the commandline, including the addnodes: c:\path\to\cloudcoin-qt.exe -addnode=91.121.221.51 -addnode=149.28.164.16891.121.221.51 is a 24/7 server so that should be sufficient to connect to and find other peers. Hope this helps. Thank you, like helped. Synchronization is in progress, 68%. Then write, when will the end result.
|
|
|
Hi! Wallet is not synchronized, what to do?
Which version? Do you have peers connected? What is your current block height? wallet v1.3.2.0 peers 1 or 0 block 967500 in 2584429.
|
|
|
Hi! Wallet is not synchronized, what to do?
|
|
|
Why is the wallet not syncing for 3 days? 8 active connections and no synchronization up to 100%. Synchronization 95% and hangs for 3 days. Who can help?
|
|
|
the wallet's not syncing, who can help?
|
|
|
I have seen that error appear due to excessively high balances in the ledger or else in the wallet overall balance. Is that the case with you? perhaps Okay... is your wallet total balance above 80 billion? No. total 4 Okay then you must have line items in the ledger at 99 million. Do this please: If you don't already have a configuration file create one. Then add the following line: staking=0 You will need to restart your wallet for that configuration to take hold. This .conf change will stop your staking and stop your crashing until you get the issue fixed. Once the issue is fixed you can go back and delete the staking=0 and restart the wallet again. Now on your top wallet navigation menu please click on settings then click on options then click on Display then check the box for Display coin control features (experts only!) then click apply then click OKNow start creating new receive addresses. Label them like reset1, reset2, reset3 and make a lot of them and copy and paste each address on a notepad to make this process quicker and easier. After you have created a lot of new receiving addresses go to Send coins and you will see a box up top labeled Coin Control Features. Click the square button called Inputs... and then check the circle for List mode Below now you will see your entire ledger line by line. Starting at the top with the largest one which will probably be like 99 million select the small box on the left for that ledger line and then click OK ... now paste your first address for reset1 in the Pay To: and for the amount split the 99 million in half so make it like 49 million coins. Now just send to yourself. This will divide that 99 million coin entry into two entries that are 45 million each. Now go back to Inputs and do this over and over and over and over. My recommendation is that you divide ANY ledger line item that is higher than 50 million. Once all of this is done remove the line you added in the configuration file for staking =0 and reboot your wallet and it will begin staking again without the errors. I did everything according to your instructions. He restarted his wallet. I'll wait for the result. 12 hours, the flight is normal. Thanks for the help! Can I donate PWR, where can I translate?
|
|
|
I have seen that error appear due to excessively high balances in the ledger or else in the wallet overall balance. Is that the case with you? perhaps Okay... is your wallet total balance above 80 billion? No. total 4 Okay then you must have line items in the ledger at 99 million. Do this please: If you don't already have a configuration file create one. Then add the following line: staking=0 You will need to restart your wallet for that configuration to take hold. This .conf change will stop your staking and stop your crashing until you get the issue fixed. Once the issue is fixed you can go back and delete the staking=0 and restart the wallet again. Now on your top wallet navigation menu please click on settings then click on options then click on Display then check the box for Display coin control features (experts only!) then click apply then click OKNow start creating new receive addresses. Label them like reset1, reset2, reset3 and make a lot of them and copy and paste each address on a notepad to make this process quicker and easier. After you have created a lot of new receiving addresses go to Send coins and you will see a box up top labeled Coin Control Features. Click the square button called Inputs... and then check the circle for List mode Below now you will see your entire ledger line by line. Starting at the top with the largest one which will probably be like 99 million select the small box on the left for that ledger line and then click OK ... now paste your first address for reset1 in the Pay To: and for the amount split the 99 million in half so make it like 49 million coins. Now just send to yourself. This will divide that 99 million coin entry into two entries that are 45 million each. Now go back to Inputs and do this over and over and over and over. My recommendation is that you divide ANY ledger line item that is higher than 50 million. Once all of this is done remove the line you added in the configuration file for staking =0 and reboot your wallet and it will begin staking again without the errors. I did everything according to your instructions. He restarted his wallet. I'll wait for the result.
|
|
|
I have seen that error appear due to excessively high balances in the ledger or else in the wallet overall balance. Is that the case with you? perhaps Okay... is your wallet total balance above 80 billion? No. total 4
|
|
|
I have seen that error appear due to excessively high balances in the ledger or else in the wallet overall balance. Is that the case with you? perhaps
|
|
|
I'm so tired of this coin. I can sell 10 billion coins from my wallet to my wallet. Who needs?
|
|
|
My wallet sometimes stops working. The inscription appears: EXCEPTION:St13runtime_error CTransaction:GetValueOut(): value out of range
You need to go into coin control and find every line item that is at 99,000,000 and send it to yourself and divide it in half so that when you are finished you don't have any line items in coin control that are at 99 million... Anyway, this inscription appears. Half a day works and then again refuses to work.
|
|
|
My wallet sometimes stops working. The inscription appears: EXCEPTION:St13runtime_error CTransaction:GetValueOut(): value out of range
|
|
|
Will the exchange exchange coinexchange.io?
I don't understand the question.... PWR coin is not listed at coinexchange.io It is not specified, but before that it was there, and I had 299 million there on my wallet. I can not withdraw or sell them. And I think that other people have such a situation there too Warning: This currency is currently in maintenance mode. It is advised not to send deposits until the wallet is active. https://www.coinexchange.io/network/peers/PWR
|
|
|
Will the exchange exchange coinexchange.io?
|
|
|
Is there any chance can i also receive some free PWR coins ?I just download wallets for me and my wife
5zBeKNMN1QLWWTnyrhQxZKeBQMGda7TydM 5x8bYYSVPfESoATjEMXFbM6zgZ83XPZshU
how can I buy more?
Sent 500,000 each
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2Fcb2sM3k&t=663&c=s-FJveSnD8EM3A) watch carefully what happens again. Date: 10.12.17 Status: conflict Source: generated Amount: -31559850 PWR Amount is indicated with minus sign Just for this amount, there is a decrease in the balance on the wallet. That's why the result is a negative balance
|
|
|
Is there anyone here that can help you support YoBit? And then they do not answer my requests. Yesterday, someone removed from my account 3000000 PWR
|
|
|
|