you must be very dumb.
even with a 14 % diff increase (which is very unlikely) you still won't make more than 3 BTC back out of the total of 8
My point is that the SP30 or SP31 will NEVER ROI, thus making the investment a big failure.
Can you prove that those will actually ROI ?
Hey, Mr. SmartAss Psychic! Could you please share with us your BTC price fluctuation predictions as well, so we know what to do? We have been waiting for you for so long! P.S. Do you do weather too? Cause my Yahoo weather app sucks lately, maybe I'll start using your services. |
|
|
|
3 days in Amsterdam, most of it on weekend, and the coffeeshop near my airBnB had Internet  That is not a vacation. Amsterdam? Didnt have you in Israel also Cannabis? But also for medical reasons ;-) No more marihuana tourism in Amsterdam, my friend. They implemented a law back in 2010, if I recall correctly, prohibiting citizens of other countries buying marihuana in Holland. So, no. I guess Zvi went to the red light district instead  |
|
|
|
I dare not clicking on the profile link using IP address....
where is that posted? you might want to omit that IP link, who knows what's at that IP
It is a pm to me... Firefox would not let me there anyway. But I guess I rather edit the IP part... |
|
|
|
Same thing here, NinjaBoom instead of NinjaBoon and Canary is leading to an untrusted webpage... We (me and my partner) would like to buy 50pcs of your SP10s! I have several questions, though:
1. Is there a place to negotiate the price? We would like to buy them for 2.1 BTC each.
2. Which escrow services are you convenient with? Give us at least 2. Do you split the escrow fees with us?
3. How long after funding the escrow is going to take you to ship the miners to WA, US?
4. Are the units somehow damaged? Bad ASICs, or anything that can harm mining power?
5. Are you going to ship them in their original boxes, to avoid any damage during transportation?
Thank you for your honest reply.
1> I have spoken to business partners and they have agreed to accept your offer price based on 50 units. 2> I have checked the recommended Escrow providers on the forum in the following thread - https://bitcointalk.org/index.php?topic=108716.0The 2 that stick out as reliable, trustworthy and charge a reasonable fee are - CanaryInTheMine https://MALICIOUS.IP/index.php?action=profile;u=18614ninjaboom https://bitcointalk.org/index.php?action=profile;u=64005They both charge a 0.5% fee or 0.525 BTC for the whole transaction. We are willing to split this cost. 3> After the Escrow has been funded we will be in a position to ship your miners within 48 hrs 4> All miners are in as new condition with no cosmetic damage or damaged internals. 5> miners will ship in original packaging with additional protection on a pallet. Ill drop both Escrow providers a pm with details and instructions on the transaction. Hi, I have received a pm from Deata asking that I facilitate a trade by providing my secure Escrow services. Why Trust Me?I have been pre approved and added to the list of forum recognized Escrow providers - https://bitcointalk.org/index.php?topic=108716.0Below is a list of my positive feedback left by those happy with my services provided during previous trades - https://bitcointalk.org/index.php?action=trust;u=55503Terms of transaction:50 X SP1 ASIC miners to provided at a cost of 2.1 BTC per unit. Thread reference : https://bitcointalk.org/index.php?topic=745257.0Unit Total : 105 BTCEscrow fees 0.5% (to be split between both parties) Total due from psahx : 105.2625 BTCTotal due from Deata : 0.2625 BTCConditionsMiners are to be dispatched within 48 hrs of notification of Escrow credit, tracking information to be supplied by Deata. Funds will only be released to the seller, Deata upon successful delivery and inspection by psahx. Should a problem arise I will act as mediator to find a satisfactory solution for all parties involved. Should there be a breakdown within the transaction funds will only be returned to the sender, psahx BTC address. Escrow Address for credit:17xhYQqGpc3p6HHWhHvXpcb5n7dyVN5c8r Should you have any queries or concerns regarding the transaction then please drop me a pm. |
|
|
|
|
Definitely interested. Would you mind providing the price, including US shipping? Will like to buy 10 or more units, for a reasonable price.
|
|
|
|
Hard-reset brought my SP10 back to life. Thanks Collider and Zvisha for help.
@Zvi: Do you think I have to worry about my miner, or this just happens sometimes?
Thanks again guys, appreciated!
Nothing to worry about. Stuck I2C is something that I have seen happening in our DC every now and then, considering that we have many miners I guess that it happens about once/twice a year per miner. Always resolved by a power cycle, that why that is the first thing I recommended. Thanks! Keep up the perfect work! Cheers. |
|
|
|
|
Hard-reset brought my SP10 back to life. Thanks Collider and Zvisha for help.
@Zvi: Do you think I have to worry about my miner, or this just happens sometimes?
Thanks again guys, appreciated!
|
|
|
|
Power supply okay?
Have you tried the hardreset?
It is in the Data center. Cant try it till morning EST.  It looks like the i2c bus is not working properly. It can be fixed by a power cycle usually. Please try a full power cycle - if it`s not helping open an ssh tunnel for us so that we can look. It is not possible to physically unplug and plug the miner in before the morning EST. But I can PM you the SSH credentials, if you would be so kind and try to help me EDIT: PM sent I will wait for you to do power cycle before investigation. @Zvisha: Thanks, will let you know. @Bicknellski: Do you read before you post, or just having fun? |
|
|
|
Power supply okay?
Have you tried the hardreset?
It is in the Data center. Cant try it till morning EST. It looks like the i2c bus is not working properly. It can be fixed by a power cycle usually. Please try a full power cycle - if it`s not helping open an ssh tunnel for us so that we can look. It is not possible to physically unplug and plug the miner in before the morning EST. But I can PM you the SSH credentials, if you would be so kind and try to help me EDIT: PM sent |
|
|
|
You're welcome to PM me if you'd like. Please be as detailed as you can (without the actual words in your password though). If you include a couple of examples of complete passwords that btcrecover would guess, and a couple that it wouldn't guess, that would help.
In particular, are 1, 2 and 3 from above always in the same order, or can they be in any order? The one or two special characters you mentioned, do they only appear once, or can they appear more than once between different words? Or do they always appear between words?
Thanks, PM sent. 1,2,3 can be in any order, and will have the same special character in between and/or at the end. If you read the PM, you'll understand, just do not want to expose this info in public Thanks again! |
|
|
|
Power supply okay?
Have you tried the hardreset?
It is in the Data center. Cant try it till morning EST. |
|
|
|
ASIC stats are empty, DCR all errors. Tried updating the firmware, went well, but still does not mine... 7797: i2c write 0x71 = 0x1 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 0 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x2 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 1 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x4 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 2 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x8 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 3 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x10 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 4 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x20 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 5 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x40 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 6 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x80 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 7 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x1 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 8 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x2 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 9 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x4 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 10 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x8 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 11 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x1 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 12 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x2 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 13 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x4 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 14 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x8 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 15 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x10 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 16 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x20 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 17 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x40 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 18 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x71 = 0x80 error2
7797: i2c write 0x72 = 0x0 error2
DC2DC DCR inductor flag loop 19 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x1 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 20 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x2 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 21 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x4 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 22 (0xD0) = 0xFFFFFFFF
7797: i2c write 0x72 = 0x8 error2
7797: i2c write 0x71 = 0x0 error2
DC2DC DCR inductor flag loop 23 (0xD0) = 0xFFFFFFFF
 |
|
|
|
Zvi, I have a problem... One of my SP10s stopped mining several hours ago. Restart and reboot won't help. What are the suggestions? Please help. Thanks.  |
|
|
|
Btcrecover (written in Python) doesn't use the Bitcoin RPC API. With Bitcoin Core wallets, on a single core CPU it's around 15% slower. On a machine with more than one CPU core it's faster. There's also experimental GPU support which makes it much faster, if it works at all... For Armory, it's exactly the same speed (because it uses the Armory library) except that it can use multiple CPU cores which again makes it faster. For Multibit (classic) and Electrum, it's quite a bit faster than any of the wallet types above because these two wallets unfortunately don't use any key stretching... Thank you very much Chris for Btcrecover! It is an amazing program, with lot of possibilities, which will suite every weird password around I have forgotten a complex password, which is constructed from: 1. <keyboard pattern> 2. word1, word2, Word1 or Word2 3. word3, word4, Word3 or Word4 4. in between of every word or/and at the end of the whole phrase I use one or two special characters. I am having trouble defining the pattern in a single tokens.txt file. Could I possibly PM you with detailed info on the pattern, so you would probably help me? Thanks in advance! Have to say, your software is a peace of art! |
|
|
|
Anyway, with them both shipping at the same time, I guess I would go for the sp30 every time. I ordered my S3s a week ago and they are hashing today. I ordered my SP30 months ago and they are still not manufactured. C'mon RawDog, don't start this bullshit again. Everybody is aware, that you have ordered nothing from Spondoolies. So, please stop it!!! |
|
|
|
Just don't read into it with too much certainty. While you can know for sure if the next few will end above 100%, you can never be sure how many will end under it. You can have a pretty good idea if they will (0-2 blocks found in the next shifts to close), but you never know when a burst might occur to bring them up to neutral or better (like how we had 3 blocks in under an hour earlier).
Just started to build-up my pool-luck-psychic skills, you know. You can excuse me some minor inaccuracies By the way, congrats to your new Legendary status!!! I wonder, how many Legendaries are there in wild? You are the first one I have noticed so far. |
|
|
|
Bah - 24 hour luck is still over 110%. I ain't fretting. Yet. Learn to read the future by open shift stats, my friend |
|
|
|
Well, if you do not believe in watts, please you all think this has 2000 watts, or It is ASIC miner 1000 GH/s with 5000 watts. are you satisfied ?? hahaha... the already cheap price, if wattage is too large it is worth. please make a debate forum if you want to argue.  This. Is. Ridiculous. Now you look like a fish, trying to sell an airplane.... |
|
|
|
|
Show Posts
