 Show Posts
|
|
Pages: [1] 2 »
|
what about the consumption of this setup? it's probably very high , above 590w, if your ratio is the same as before, i see no reason to overclock
but if you are getting something better like 1554 at 700-800, it would be a good move to overclock the S5
this OC should work with every 28nm board and not so much with the future 16nm or 14nm
Do you know! i' am not using PSU 700W or 800W, but i am using PSU GIGABYTE 500W of each Board BECAUSE I FOUND 750w PSU COST ABOUT 266 USD EACH, SO I BOUGHT 2 OF GIGABYTE 500W CUST 75 USD  Bitmain generally recommends to use only 1 PSU to power up your miner. Using 2 PSU to power the same miner can cause issues like voltage variations that can be harmful for your miner. You could use a more powerful PSU to power two miners. At least, thats what bitmain says. Also, try to use good PCI-E cables. On my local bitcoin miners Facebook page, people use better components to build their own cable. Thank you for your helpful tips I have changed to cooler master 750m GOOD JOB http://store2.up-00.com/2015-10/1445215205291.jpg |
|
|
|
|
الاخ Redones
ليش مطنشني حبيبي مافي لازوم لا ترد على الخاص ولا العام
العموم شكرا لك
وبهذا سنستمر في تاخر وهم في التقدم
|
|
|
|
|
Redones وهل ممكن نرسلي ادمن للموقع الاول نشوف كيفية العمل
|
|
|
|
|
عمل جيد
طيب ممكن نشاهد بعض النماذج منها
|
|
|
|
|
بارك الله فيكم
وجاري التجرب وسوف نوافيكم بها
|
|
|
|
اهداء موقع جميل جدا بخدمته
حول رصيد بيتكوين الي رصيد في موبايلك سريع جدا صاروخي لكل الشبكات والدول بمافيه السعودية وانا جربت موبايلي حولت 10 ريال مقابل 0.0132 اعطونا رايكم فيه https://www.bitrefill.com/
|
|
|
|
|
طيب شكرا لكم
اذا ماهي الخطوة الاولى للعمل؟؟
ممكن ترسلي معلومات السكربتات الجهازة وانواعها ومن سيعمل عليها -- ملفك يقول انك مبرمجة
|
|
|
|
what about the consumption of this setup? it's probably very high , above 590w, if your ratio is the same as before, i see no reason to overclock
but if you are getting something better like 1554 at 700-800, it would be a good move to overclock the S5
this OC should work with every 28nm board and not so much with the future 16nm or 14nm
Do you know! i' am not using PSU 700W or 800W, but i am using PSU GIGABYTE 500W of each Board BECAUSE I FOUND 750w PSU COST ABOUT 266 USD EACH, SO I BOUGHT 2 OF GIGABYTE 500W CUST 75 USD Bitmain generally recommends to use only 1 PSU to power up your miner. Using 2 PSU to power the same miner can cause issues like voltage variations that can be harmful for your miner. You could use a more powerful PSU to power two miners. At least, thats what bitmain says. Also, try to use good PCI-E cables. On my local bitcoin miners Facebook page, people use better components to build their own cable. Yes I know  you are right But I do not want to step, I don't have more cash to purchase PSU thank you |
|
|
|
I think the measurement is wrong. This cannot be true without an explosion in a couple of minutes.
maybe you're right |
|
|
|
شكرا لك اخي انا سجلت في الموقع ولم اعرف يوجد اللغة العربية لكن هذا جيد جدا
من شهر ونصف
بدات في اعمل تعدين من خلال جهاز
antminer s5
وصارحة الشغلة جيدة وفيه فلوس كويسه
والان انا اعمل على 3 اجهزة وناوي اتقدم حتي اصل الي مزرعة
عندي سوال هل ممكن نتعاون او تدلني على عمل موقع يشبة
http://www.btctopp.com/index.php
لكن يكون شامل حيث يحتوي على اكثر من بابل
شكرا لك مرة اخري
|
|
|
|
|
Do not worry about monthly cost for Electricity its 82 Saudi riyals for two s5
|
|
|
|
what about the consumption of this setup? it's probably very high , above 590w, if your ratio is the same as before, i see no reason to overclock
but if you are getting something better like 1554 at 700-800, it would be a good move to overclock the S5
this OC should work with every 28nm board and not so much with the future 16nm or 14nm
Do you know! i' am not using PSU 700W or 800W, but i am using PSU GIGABYTE 500W of each Board BECAUSE I FOUND 750w PSU COST ABOUT 266 USD EACH, SO I BOUGHT 2 OF GIGABYTE 500W CUST 75 USD |
|
|
|
Thank you, your comment make me optimism 
|
|
|
|
|
