|
XmuXX57UQeDkRP9pU9qbywjS7HowA2oP1s
|
|
|
|
Is it possible to add a second server as a failover using smos?
I just add second pool in miner option, it's working, pools are switching but pool dont see worker name |
|
|
|
|
Hi everyone, i have 2 problems running this OS with nvidia GPUs (1060 6GB).
Problem 1 - no GUI
I download fresh image for NV GPU, and when i start it got only text terminal. How start GUI? Running version for AMD GPUs GUI start by default.
Problem 2 - overclocking
How to downclock core? While mining ETH theres no need to GPU core run on full speed. Under Windows I set core for -400MHz and hashrate are the same like on default clock. Negative value are not allowed.
And second thing. Is there a way to turn of P2 State. To OC memory clock for 500MHz , from 4000 to 4500MHz, I need to set offest at 1400, so GPU definitly go in to P2 State and drop the clock.
|
|
|
|
Ok, my S9 start working a bit better. https://s32.postimg.org/53zy2xn91/s9_625_Mhz.pngMost important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH. Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up. those chips temps are wayyyy too high my friend. your running some dangerous numbers. they should never go much higher than 70 degrees c at the chip and each day it runs like that it loses a little more life until it finally dies. if posible i would try fixing this sooner rather than later. i dont want your hardware throwin out that magic smoke. No they are not. For GPU yes, but not for ASICs. |
|
|
|
Ok, my S9 start working a bit better.  Most important thing was set fan manualy at 90%. After this at 650Mhz get 13TH+ but with quite a lot HW errors (0,0015%). After lower frequency to 625Mh HW drop to 0.0003% and speed stabilized at 13,1TH. Strange thing is that miner need few restarts to hashig properly, sometimes 1 board hang at 3TH and dont want speed up. |
|
|
|
Here's stats after 12h of mining my S9. Hashrate far below 14TH. At 650MHz hashrate was below 12TH and definitely ailing last board. Best hashrate got at 606.25MHz, 12,5Th @ 1310W from wall. https://s31.postimg.org/nkdb9u9jv/s9_12h.pngwhat is the ambient temperature in the room? I suspect that getting 14.0 th will not happen unless room is 70 f or 21.c and that board is not sick 61c and 93c are fine Don't have any thermometer at hand right now but should be around 22-23°C. |
|
|
|
Here's stats after 12h of mining my S9. Hashrate far below 14TH. At 650MHz hashrate was below 12TH and definitely ailing last board. Best hashrate got at 606.25MHz, 12,5Th @ 1310W from wall.  |
|
|
|
|
slastar - 3.125BTC - 1FDwU1uC8GS3YpaB98e8mPbFCJZcjBRFUn
|
|
|
|
 I guess they make the S5 like size first to be S7 , and later maybe S7+ of 3 units of combination version. I know. S7 with 2Th @ 450W will be nice hardware but S7+ would be hilarious. |
|
|
|
look nice  S5+ with BM1385 chips would have 14TH @ 3.2kW   |
|
|
|
This thing seems like a big pain the ass with needing what 18 pcie connectors?
You can use 2x IBM DPS-2000BB and J4bberwock BreakBorad where you have 12 pcie connectors per board |
|
|
|
|
Show Posts
