Show Posts
|
Pages: [1] 2 »
|
When I try and restore my wallet with the wallet words it just says working but the connection dot is red and it just stays there ...Is multibit broken ?
|
|
|
Add me also Thanks ! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) 13s1y83t1UhruHiVPC64TPQ122H6eAQZAe
|
|
|
ck did a 1.25 , that's the one I used........... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
Attach ribbon cable between dragon and jalapeno, turn on dragon by plugging in the usb to square printer cable, plug in jalapeno to power supply . I only used the elf file at the “ Memories" stage from Kano's excellent guide at the bottom. At the memories stage u navigate to where u saved the elf file and hit program, that is after erasing the chip .... I didn't try it without hitting the erase button first....... I would run the jalapeno after the flash without the case and with the fan blowing down... hope this helps...... http://www.kano-kun.net/?p=70
|
|
|
It's nice that the beta client works with my flashed jalapeno the other one didn't work after the flash...............
|
|
|
I thought CK only modified the 1.2.5 firmware
|
|
|
I went back and forth several times and can't get that winusb driver (zadig) to play ball anymore , I wanted to use cgminer to find out how many engines I was using .. anyway I intend to flash my jally with ck's compilation and use the ftdi drivers and hopefully get an improvement of my hash rate's with bitminter client or bfgminer. I'm getting just on 5.8 now so have high hopes for the flash .......... The cable that is on kano's tutorial fits on my jally without removing the heatsink . My heatsink has a cutout around the jtag . I only had to take off less than 1mm from the side of the female pin molding ... so now I've ordered my dragon ..... ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Got it done, over 8gh/s now
|
|
|
thanks pop and donkey i got my cable coming tomorrow to try it looks like my heatsink has a cutout for the jtag i got my jala about 3 weeks ago
|
|
|
It's just the website not updating I think cause im still going on bfgminer... i put the zadig ones back on and they just close up after I enter the pools details... Probably could do with a reformat but not in the mood really..... So now can anyone tell me if after they flashed their jally does the FTDIChip CDM drivers ie:USB Serial port (com3) still work after flashing the jalapeno to either ck's version or 1.2.5 Thanks to all , I just don't want to brick it ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) ................. It's these drivers http://www.ftdichip.com/Drivers/VCP.htm that I want to know work after the flash.............. win7x64
|
|
|
Well it was hashing on cgminer and lost connection and now the bitforce sha256 sc usb driver wont work with anything, ive put the FTDIChip CDM Drivers back on and I am back to bfgminer or bitminter... So what I have to find out if the FTDIChip drivers work or not after the flash , basically Im stuck using the usb serial port driver (com3)....? ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
|
|
![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Thank you so much , that was it ........
|
|
|
I'm planning to flash my jalapeno , only thing I want to ask will I have any trouble running it with bfgminer or Bitminter clients after the flash because I am having trouble running my jally on CGminer now ?? In other words will doing the flash force me to use CGminer only ?...Thanks
No, nothing should change. But I am curious as to why/how you are having problems running one with one client and not the other. The only thing that would be a difference is making sure you have the correct driver. I used to use my jally on Windows and ran it with bfgminer just fine. I run it now connected to a BAMT rig running cgminer, and again, no problems. On Windows however, if you want to use your Jally with cgminer you will need to change over the drivers to winUSB using zadig. I have been trying to get it to run in CGminer ,I've tried zadig and it detects 0 devices , I have no problem with BFGminer and Bitminter .. The poster above has got me worried about using ck's firmware because he says it doesn't work with bitminter client anymore which I like , would it be safer for me to just use the Bitforce original 1.2.5 ? Thanks for any input........im getting 5.8 without errors running out of the case with fan blowing down now............
|
|
|
I'm planning to flash my jalapeno , only thing I want to ask will I have any trouble running it with bfgminer or Bitminter clients after the flash because I am having trouble running my jally on CGminer now ?? In other words will doing the flash force me to use CGminer only ?...Thanks
|
|
|
Well done for flashing the Jalapeno I got to do mine yet , but that is really weird about the orientation of the fan affecting the hash speed. I can't see how it would make a difference.....! You know what it must be , turning the fan the other way must add resistance to the fan which alters the voltage ! I wonder what speed you'd get if u briefly unplug the fan....
|
|
|
I have a 3/31 Jalapeno that I did recently upgrade to 7 and I'm pretty sure by the time it gets to me I might be able to use it to warm a mug of coffee. That was a serious jump and we currently seem to be without WhitePhantom and CloudHashing ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Is that just firmware ?
|
|
|
I would suggest anyone who has a jalapeno ordered to order the speed increase , I have a 5.6 jalp and the diffaculty has gone up since I got my jalapeno last week........ ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
I got my jalapeno hashing on bfgminer 3.1.4 with the host pc gpu disabled but the gpu temp. does not return to the normal idle temp. How can I take it completely out of the equation so it doesn't leech for want of a better word.. Obliviously I want to still have the gpu enabled on the pc to play games etc.. Thanks..................... I tried the bitminter client and the gpu is completely idle , before with the BFGminer I was using an extra 50 watts from the leeching gpu.........I'm sure there is a way around this.........
|
|
|
|