 Show Posts
|
|
Pages: [1] 2 »
|
|
pool looks to be down....
|
|
|
|
Hello,
Just wondering if the payouts have been completed yet? Didnt notice anything in my wallet yet...
Thanks
Did you set an auto payout thresh hold in my account? Check that first. Of course I didn't...  Oops... I was testing you, and you PASSED! Great Job! Thanks, |
|
|
|
|
Hello,
Just wondering if the payouts have been completed yet? Didnt notice anything in my wallet yet...
Thanks
|
|
|
|
After verifying with Laviathon, to qualify for this rounds 1BTC blockfinder bonus, you had to have been actively mining at the time the last block was found. Hope this clarifies things for the miners that dropped off and came back for this new round.
This takes away a lot of incentive for the people who had joined and would have come back and mined through the round. To me it's more of an incentive to remain a dedicated member, then hop around to a bunch of different pools... Just saying... |
|
|
|
|
I'm looking for just a Controller, but PM me the price for your setup... I might be interested in it...
Thanks,
|
|
|
|
How many cubes do you have - I have controllers and need cubes...I bet we can figure something out.
I currently dont have any cubes, but know someone selling 4 of them with psu for a half decent price, just needs a controller... would you be willing to sell me one? If so, please let me know cost... Thanks |
|
|
|
I have a KNC Jupiter controller, 6 port. Its a little buggy because requires a few boots before it gets going but once it starts it hashes fine. I think it doesn't like being cold.
I'm in Canada also so I can sell the controller or buy some Cubes.
Pm me your price for the buggy controller. Lol Thanks |
|
|
|
|
My S2 is now running fine on your pool with the new ports... no issues anymore, Thanks!
I still have some rentals running, but I'll leave my S2 running... Working on upgrading my Equipment, but we'll see...
Thanks,
|
|
|
|
Hello, I might have a good deal on some Cubes, but there is no Controller included... Does anyone have any spares? Located in Canada would be even better... Please let me know, Thanks, |
|
|
|
|
I would love to, but 1) I'm in Canada and 2) i'm Broke... lol
|
|
|
|
|
Well.. That makes sense... now I wonder Why it's doing it...
I could understand a hardware issue if it acted like this for all pools, but it works fine on Kano, nicehash, bitminter....
Odd....
|
|
|
|
Wierd... Seems ok now... Been running about 30 mins.. LSDiff is now showing 1536, but only 2 rejected and 0 stale....
Will let it keep going and see what happens...
Thanks,
Antminers had issues with diffs set as powers of 2. Not sure if that was the cause of your problems. If you want to test it on my pool, please feel free to do so (my pool starts at a 1042 - not a power of 2)... and then come back and mine with BCMonster - I'm definitely not trying to poach any miners, just offering you up another test environment. Wierd, Does it with your pool as well... The "Diff1#" Number jumps up (Currently 6200971) and the "DiffA#" is low, (Currently 6252), LSDiff is 1042, and did the same thing, 6 Accepted, 493 Rejected, Pool shows as offline for a min... |
|
|
|
Wierd... Seems ok now... Been running about 30 mins.. LSDiff is now showing 1536, but only 2 rejected and 0 stale....
Will let it keep going and see what happens...
Thanks,
Scratch that.. Just threw 350 Rejected, and now shows the pool as offline... |
|
|
|
|
Wierd... Seems ok now... Been running about 30 mins.. LSDiff is now showing 1536, but only 2 rejected and 0 stale....
Will let it keep going and see what happens...
Thanks,
|
|
|
|
So I put it back to port 3333 for now... Another thing I noticed as well, it starts out well, working as it should, then it seems all of a sudden it gets a whole bunch of Rejected, then it shows the pool as Dead for a little bit... Then it comes back up, and keeps doing that...
What is the auto difficulty adjusting to after 3 or 4 minutes? LSDiff Seems to stay at 1024, which on other pools runs fine... |
|
|
|
|
So I put it back to port 3333 for now... Another thing I noticed as well, it starts out well, working as it should, then it seems all of a sudden it gets a whole bunch of Rejected, then it shows the pool as Dead for a little bit... Then it comes back up, and keeps doing that...
|
|
|
|
If you don't mind, please post a screenshot here.
Screenshot:  Looks like the auto diff is not dropping down enough. Try connecting to port 3332 I have the auto diff set to 2 for video cards. I'll make one for 8 when I get home tonight. I thought 1024 is just right for an s2??? Your right i was thinking u2 So the new port is working, Rejected is a lot lower now, but it's hashing at a really low speed, guessing thats from the difficulty being set too 2.... |
|
|
|
If you don't mind, please post a screenshot here.
Screenshot: Check your pcie connections and make sure non are loose and they are all connected tight and secure. Next make sure you havent overclocked the crap out of your unit as overclocking can cause rejected/stale share rate to increase, then check your ethernet connection as well, make sure the cable is nice and secure, or try another cable, finally if all those dont help, make sure you are getting proper power from whatever outlets you are using to power the device. Hello, The settings are mostly Default, so it's not overclocked... runs other pools with no issues... Will try and other port and see what happens... Thanks, |
|
|
|
If you don't mind, please post a screenshot here.
Screenshot: |
|
|
|
|
