|
I see that the dev is very firm in dealing with fud, I know that the dev is very stressed to overcome all the problems for this new coin, hopefully everything will get better in the future
|
|
|
|
|
i see dev more active in discord and very helpfull for any trouble, Good Job!!!!
|
|
|
|
|
i bet eth will be a shitcoin
|
|
|
|
edit : ok i found the problem, need to use non ssl port and it run smooth... Thanks
Which version are you testing? The latest version will give you an error message on SSL connection. v1.56 im using right now |
|
|
|
Flexpool is already working fine in tbminer, but they decided to block Russian ip addresses for mining. Perhaps you are effected.
----------------------------------------------
i use 3080 12gb gpu but it seem very slow to start miner 0 hasrate running 10 minute and more than that, already restart the rig but same behavior edit : ok i found the problem, need to use non ssl port and it run smooth... Thanks |
|
|
|
|
Please add support for flexpool....
Thank you
|
|
|
|
|
please enable --mclk 810 for rtx 2xxx series. Thank you
|
|
|
|
this is what i get from t-rex
Slow.. Why isn't it 100++?. We do the unlock different than t-rex and will probobly end up over 100 when the code is done. My comment from 10 days ago.. Getting closer to a 90-100MHASH unlock on 3080ti LHR2
Hashrates fluctate, but stable without triggering the LHR for ~5 minutes at 100% tdp.
in 5 minute i got more than 100 mhs with t-rex , i hope u ca do better than t-rex bro, so far u have a good job!!! |
|
|
|
need more improvment.... 88-90 mhs on t-rex
Not on the latest driver. I only get 72.5 when running t-rex on windows with autotune in (497.09) v1.32 will have LHR detection and reset device when the gpu goes into LHR mode. Then it's easier for the miner to find the optimal tweak / lhr value. Next up is autotune. this is what i get from t-rex  |
|
|
|
baby steps. keep it up. i noticed that for trex, lhr unlock performance is not as good on the latest driver. it stays at 73 stable while it could get up to 76 on previous drivers. the number here is the LHR unlock %
I get 72.5 after a while with the latest t-rex on the latest driver with autotune. This might not be the optimal settings t-rex, but I do use the same settings in TBM and get a hashincrease. 3080ti;
core: 0 default
mem: (+1000) 10500mhz
pl: 70% power
lhr-unlock [1] = 81 MHASH stable for 1 hour.
lhr-unlock [1] --tweak [1] = 85 MHASH stable for 8-15 minutes.
Been running rock stable all night with -lhr-unlock [1]. We will do a linux build and release today. In the next version we probobly will add a LHR detector, and reset the device automaticly. Then we migth be able to do 85 (90 with 11000 mem) stable. on the latest driver. need more improvment.... 88-90 mhs on t-rex |
|
|
|
GMiner v2.72 available for download
v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71
Ethash fee is 0.65%
KAWPOW fee is 1%
can u fix cortex algo for rtx 3090? always crash on start in windows 10 Gminer 2.73 isavailable see earlier post #2510. You can download it from gminer github releases. its fix for cortex? |
|
|
|
GMiner v2.72 available for download
v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71
Ethash fee is 0.65%
KAWPOW fee is 1%
can u fix cortex algo for rtx 3090? always crash on start in windows 10 |
|
|
|
Just some debug output we forgot to remove. Don't worry about it.
ok thank you |
|
|
|
what is the meaning of gpu range.. i see in red color?  |
|
|
|
|
waiting for 1070ti speed upgrade.... with any high xintensity only hold 3minute bump hashrate and back to normal again 33.xx mhs, comparing other software can do 34.xx
thanks...
|
|
|
|
 what about this? |
|
|
|
try
tbminer --list-devices
what do you get?
Available Cuda devices
-----------------------
Available OpenCL devices
-------------------------
Device Number: 0
Device name: Ellesmere
PCIe bus id: 1
Memory: 3GB
Device Number: 1
Device name: Ellesmere
PCIe bus id: 2
Memory: 3GB
Device Number: 2
Device name: Ellesmere
PCIe bus id: 3
Memory: 3GB
Device Number: 3
Device name: Ellesmere
PCIe bus id: 4
Memory: 3GB
Device Number: 4
Device name: Ellesmere
PCIe bus id: 8
Memory: 3GB
Device Number: 5
Device name: Ellesmere
PCIe bus id: 11
Memory: 3GB
Device Number: 6
Device name: Ellesmere
PCIe bus id: 12
Memory: 3GB
Device Number: 7
Device name: Ellesmere
PCIe bus id: 13
Memory: 3GB
Device Number: 8
Device name: Ellesmere
PCIe bus id: 14
Memory: 3GB as far as i know 3gb card cant mine eth |
|
|
|
Update after about one day of GMiner vs TBMiner competition  TBMiner (ver 1.18):  GMiner (ver 2.70):  can u show me pool graph each miner? |
|
|
|
i think a lot of room to improve 1070ti hashrate... maybe u can consider change something
1070ti needs memtweak. You can run an old t-rex miner on ultra low intensity in the backround. will boost the hashrate from 32-33 to 34-35. For the gtx 1080 and gtx 1080ti use "the pill" i use nb miner with mem tweak get 34.xx mhs |
|
|
|
|
Show Posts
