Show Posts
|
Pages: [1] 2 »
|
This morning when I turned it on one of the cards stopped working. This unit has always been connected to slush with no firmware update. I have tried to reboot and factory reset but nothing... Any thoughts? cheers
|
|
|
atomsignal paid service or free service if free service without problem, if paid service you must complain
Yeah it is a paid service ~60USD/month
|
|
|
Just heads up to those interested in this service. I recently paid the monthly subscription in order to try it out and since Feb. 27th they just stopped sending the daily signals and they are not replying from their customer support.
I will update the thread if there is any news about this.
|
|
|
is there a way to do backtesting or paper trading 1st? or the only way is to start with little money
|
|
|
Hey everyone please bare with me. I have spent the better part of past 2 weeks reading novels worth of information regarding assembly and software installation. I've got Win 10pro successfully installed, built my frame and getting ready for final assembly.
Parts list 5x MSI RX 480 Gaming X 8gb 1x Saphire RX 480 Nitro 8gb 6x Ver 007 risers (red ones) Asrock H81 Pro Btc EVGA 1300 Supernova G1840 cpu cheap ram
I was fairly confident I would get along without having to ask any questions as I believe in searching, but I am more then confused regarding drivers. I am getting/reading so many different suggestions as to which AMD drivers to use that I am now not sure which ones to use, I know Claymore says Catalyst (Crimson) 15.12, but others say to use different driver.
My eventual goal is to dual mine Eth/Dcr, once I have that stable and figured out then I want to flash/mod the bios as I am reading that 29-31mhs are achievable depending on chip models.
So with that said and knowing what I want to do with this rig, which drivers would you guys recommend I install? Also power consumption is important to me, but it's NOT as important as it may be to others as hydro is included in my rent, not sure if this will play a role in which drivers I should install?
Again, I appreciate all the help guys....man that Claymore thread was a long one to read, but it seemed the more I read the more I was uncertain regarding drivers.
It seems that the Asrock H81 Pro Btc and Biostar Tb85 are out of stock everywhere in the US, any suggestions? cheers Yes I had a hard time finding one... I had to order on ebay, came from France. What?! What do you mean what? We're you not asking where to find a motherboard? yeah, but that's not a reasonable alternative imo :/
|
|
|
Hey everyone please bare with me. I have spent the better part of past 2 weeks reading novels worth of information regarding assembly and software installation. I've got Win 10pro successfully installed, built my frame and getting ready for final assembly.
Parts list 5x MSI RX 480 Gaming X 8gb 1x Saphire RX 480 Nitro 8gb 6x Ver 007 risers (red ones) Asrock H81 Pro Btc EVGA 1300 Supernova G1840 cpu cheap ram
I was fairly confident I would get along without having to ask any questions as I believe in searching, but I am more then confused regarding drivers. I am getting/reading so many different suggestions as to which AMD drivers to use that I am now not sure which ones to use, I know Claymore says Catalyst (Crimson) 15.12, but others say to use different driver.
My eventual goal is to dual mine Eth/Dcr, once I have that stable and figured out then I want to flash/mod the bios as I am reading that 29-31mhs are achievable depending on chip models.
So with that said and knowing what I want to do with this rig, which drivers would you guys recommend I install? Also power consumption is important to me, but it's NOT as important as it may be to others as hydro is included in my rent, not sure if this will play a role in which drivers I should install?
Again, I appreciate all the help guys....man that Claymore thread was a long one to read, but it seemed the more I read the more I was uncertain regarding drivers.
It seems that the Asrock H81 Pro Btc and Biostar Tb85 are out of stock everywhere in the US, any suggestions? cheers Yes I had a hard time finding one... I had to order on ebay, came from France. What?!
|
|
|
Hey everyone please bare with me. I have spent the better part of past 2 weeks reading novels worth of information regarding assembly and software installation. I've got Win 10pro successfully installed, built my frame and getting ready for final assembly.
Parts list 5x MSI RX 480 Gaming X 8gb 1x Saphire RX 480 Nitro 8gb 6x Ver 007 risers (red ones) Asrock H81 Pro Btc EVGA 1300 Supernova G1840 cpu cheap ram
I was fairly confident I would get along without having to ask any questions as I believe in searching, but I am more then confused regarding drivers. I am getting/reading so many different suggestions as to which AMD drivers to use that I am now not sure which ones to use, I know Claymore says Catalyst (Crimson) 15.12, but others say to use different driver.
My eventual goal is to dual mine Eth/Dcr, once I have that stable and figured out then I want to flash/mod the bios as I am reading that 29-31mhs are achievable depending on chip models.
So with that said and knowing what I want to do with this rig, which drivers would you guys recommend I install? Also power consumption is important to me, but it's NOT as important as it may be to others as hydro is included in my rent, not sure if this will play a role in which drivers I should install?
Again, I appreciate all the help guys....man that Claymore thread was a long one to read, but it seemed the more I read the more I was uncertain regarding drivers.
It seems that the Asrock H81 Pro Btc and Biostar Tb85 are out of stock everywhere in the US, any suggestions? cheers
|
|
|
I had the same issue with the 2 trades this morning. I have cancelled the 2 bids since these were not filled and the bot tried to sell them.
It would be nice to get a one day refund for the people who has paid for the service. Thanks
|
|
|
Only 3 techs are relevant for BAML and NEM is one of them!When major banks research about blockchain, they look for the best technology. Here is a report made by Bank of America Merril Lynch about "Fintech and blockchain: The impact on Japan’s IT services sector" http://pdfsr.com/pdf/baml-report-fintech-and-blockchain-the-impact-on-japan-s-it-services-sector
. In this report they only considered 3 open source projects: NEM, Bitcoin and Ethereum. This says a lot about where NEM stands, and looking at these 3 projects market cap I wonder which one has the biggest opportunity to grow... yup, you got it right: NEM.
|
|
|
How do I unlock my funds with the simple wallet? I was testing it by sending funds and at the beginning my balance was fully unlocked however after 1 tx sent the wallet locked around 90% of the funds. Thanks
Just have to wait a little bit, maybe twenty minutes I think, a few blocks maybe. Correct. What is going on is change being sent back to the original sender. Just like any transaction it has to confirm to be fully received. Awesome, thanks it has been 3 days and nothing my funds still blocked, any idea what can I do? thanks edit: nvm after sync it got unlocked
|
|
|
How do I unlock my funds with the simple wallet? I was testing it by sending funds and at the beginning my balance was fully unlocked however after 1 tx sent the wallet locked around 90% of the funds. Thanks
Just have to wait a little bit, maybe twenty minutes I think, a few blocks maybe. Correct. What is going on is change being sent back to the original sender. Just like any transaction it has to confirm to be fully received. Awesome, thanks
|
|
|
How do I unlock my funds with the simple wallet? I was testing it by sending funds and at the beginning my balance was fully unlocked however after 1 tx sent the wallet locked around 90% of the funds. Thanks
|
|
|
I'm glad to see that someone posted about this too. I'm in the same situation... Their customer service is really poor, I tried to contact them but they never got back to me. Because of this, I don't use Yobit anymore.
|
|
|
Is anything wrong with your Qt for windows? i left it the whole night and it didn't sync. Thanks
Could someone please assist me with this ? my Winqt wallet still doesn't sync Did you make a conf file like I described above? Yes, still have 0 connections :s
|
|
|
Is anything wrong with your Qt for windows? i left it the whole night and it didn't sync. Thanks
Could someone please assist me with this ? my Winqt wallet still doesn't sync
|
|
|
Is your wallet qt working? mine is not syncing or do I need to do something manually? thanks
Still no connections... Did yo start the wallet as explained in the guide on page 9? No, please share the link. Thanks
|
|
|
I tried sending some OK coins to my wallet from yobit but it has been 1 hr and the tx still 0 confirms... I sent some from bittrex to my OK wallet and it took a few minutes. I raised a ticket on yobit but they don't answer. Any advises? should I worry?
|
|
|
Is your wallet qt working? mine is not syncing or do I need to do something manually? thanks
Still no connections...
|
|
|
Is anything wrong with your Qt for windows? i left it the whole night and it didn't sync. Thanks
|
|
|
Is your wallet qt working? mine is not syncing or do I need to do something manually? thanks
|
|
|
|