 Show Posts
|
|
Pages: [1]
|
Hello guys,i need a little help,i have problem,when i am syncing new blockchain on new desktop wallet 32bit,windows 7.After some time loading blockchain it reports runtime error,what to do ,is this problem with wallet or network,please help.Thanks
https://github.com/digibyte/digibyte/issues/100Thanks for answer,so only solution is to make 64bit desktop wallet if understand it ,is there really no another way. There will be a way.......someone will need to identify the issue and resolve it. That could be anyone, especially if enough people were reporting the issue I guess, resources are limited. Thanks for fast answer,i will try to load it,if error kepps showing i will load new 64 bit windows and 64bit wallet,uffff it will take me time. Thanks again Jumbley,i hope they resolve problem soon. found this...may help. https://www.reddit.com/r/Digibyte/comments/6c1eyl/help_syncing_wallet_to_chain/Thanks,i am trying to open link for boostrap file,but nothing exists on link file,i quess it will be the best way to load 64bit. |
|
|
|
Hello guys,i need a little help,i have problem,when i am syncing new blockchain on new desktop wallet 32bit,windows 7.After some time loading blockchain it reports runtime error,what to do ,is this problem with wallet or network,please help.Thanks
https://github.com/digibyte/digibyte/issues/100Thanks for answer,so only solution is to make 64bit desktop wallet if understand it ,is there really no another way. There will be a way.......someone will need to identify the issue and resolve it. That could be anyone, especially if enough people were reporting the issue I guess, resources are limited. Thanks for fast answer,i will try to load it,if error kepps showing i will load new 64 bit windows and 64bit wallet,uffff it will take me time. Thanks again Jumbley,i hope they resolve problem soon. |
|
|
|
Hello guys,i need a little help,i have problem,when i am syncing new blockchain on new desktop wallet 32bit,windows 7.After some time loading blockchain it reports runtime error,what to do ,is this problem with wallet or network,please help.Thanks
https://github.com/digibyte/digibyte/issues/100Thanks for answer,so only solution is to make 64bit desktop wallet if understand it ,is there really no another way. |
|
|
|
|
Hello guys,i need a little help,i have problem,when i am syncing new blockchain on new desktop wallet 32bit,windows 7.After some time loading blockchain it reports runtime error,what to do ,is this problem with wallet or network,please help.Thanks
|
|
|
|
Hello
Can anyone help me,i have only 1conection on wallet,what to do to have full conections,thank you for answers.
Have a nice day
There is a problem with your internet connection. please be sure that eMark-QT have full access to port 5556 and 6666. eMark update peers over this ports and used seeds. Virtual machines and conections over networkbridge have this problem to. To solve in Virtual Machines you can open your eMark.conf and add some good nodes from here: http://status.deutsche-emark.de/Thank you for reply,i will try,i hope this will work.Have a nice day |
|
|
|
|
Hello
Can anyone help me,i have only 1conection on wallet,what to do to have full conections,thank you for answers.
Have a nice day
|
|
|
|
I found your problem
rpcpassword is missing in you daemon conf file.
The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg
Done!
... \\... ... Sorry friend, are you asking something? Hello,thanks for all informations,just didnt have time to write back,i made my wallet work with your instructions,but i have now another problem,i have 0 connections,i have added all nodes,but there is still no connection.Any advice,thank you. |
|
|
|
I found your problem
rpcpassword is missing in you daemon conf file.
The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg
Done!
I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet. \\that made the wallet work? i tryed this it didnt link up cloud servce i guess its thinking lol will check back Hello,thanks for all informations,just didnt have time to write back,i made my wallet work with your instructions,but i have now another problem,i have 0 connections,i have added all nodes,but there is still no connection.Any advice,thank you. |
|
|
|
I found your problem
rpcpassword is missing in you daemon conf file.
The easiest way to fix this is:
1) backup your wallet (copy wallet.dat to another location) if you didn't do that yet
2) Rename WorldcoinBC.cfg to WorldcoinBC.cfg1
3) Execute WorldcoinBC.exe (The wizard will be executed)
4) When choosing where you want to store your data select the same directory located in Daemons.cfg
Done!
I have done and it works now,do i need to change wallet.dat with one i made copy,becouse there is no coin in wallet. |
|
|
|
Everything seems fine there, i will wait for the log file
Another thing, while its running please open your task manager and search for a process called: WorldcoinDaemon.exe
(It should be running)
I dis send log files,no it is running only worldcoinpanel exe ,there is no worldcoindaemon.exe,at the starting of wallet it comes notification that program is not working,if i run it on my own hand it comes next notification,i have send a picture on last email with logs.Thank you |
|
|
|
Where do i send log files
Ok, this is what we are going to do 1) Let the wallet continue indexing (the screenshot you sent) , depending on the speed of your computer it can last many minutes Ok,i did leave ti last day all day but it is still the same,but i will leave it again. 2) While it is indexing send me the log at contact@worldcoin.globalThere are couple of files with logs,do i send them all 3) Open file Daemons.cfg, and check that DataDirectory is pointing to the correct directory (this is the block chain directory) This is written in the file i think is pointed to correct directory. [WDC] DataDirectory=C:\\Users\\Servis\\Documents\\WorldcoinChain BinaryName=WorldcoinDaemon User=Worldcoiner Password=07Fvbtb$234vvrD56e Port=11081 RpcPort=11082 PidFile=worldcoind.pid LockFile=.lock BalanceMinConfirmations=1 Enabled=1 |
|
|
|
I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
For nodes please check this thread http://forum.worldcoin.global/index.php?/topic/398-peers/It comes with instructions on how exactly you can add a node Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe) https://worldcoin.global/worldcoinbc-3-0-beta2-released/Sorry for stupid question,how do i add nodes,thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
add new nodes Hi,
new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY
WorldcoinUnited TEAM
Ok,here is an image  Where do i send log files |
|
|
|
I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
For nodes please check this thread http://forum.worldcoin.global/index.php?/topic/398-peers/It comes with instructions on how exactly you can add a node Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe) https://worldcoin.global/worldcoinbc-3-0-beta2-released/Sorry for stupid question,how do i add nodes,thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
add new nodes Hi,
new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY
WorldcoinUnited TEAM
Ok,here is an image |
|
|
|
I did open wallet but when i click a console nothing happens,how do i post here a picture of prnscr of wllet from desktop.Thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
For nodes please check this thread http://forum.worldcoin.global/index.php?/topic/398-peers/It comes with instructions on how exactly you can add a node Also you may give V3 Beta a try, it is 100% compatible with 2.0.2 and uses the same daemon (so your coins are perfectly safe) https://worldcoin.global/worldcoinbc-3-0-beta2-released/Sorry for stupid question,how do i add nodes,thank you. Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
add new nodes Hi,
new seed nodes are building, for now there are 2 active nodes: seednode1.worldcoinunited.com (77.247.229.93) READY and seednode2.worldcoinunited.com (78.141.116.239) READY, seednode3.worldcoinunited.com (52.64.248.229) READY
WorldcoinUnited TEAM
|
|
|
|
|
Hello i have a problem,after a long time i tried to open and refresh my wallet and there is no conections and coins are not visible,please for help what to do,i use worldcoinbc 2.0.2 fitness hippo.At the start i get notification worldcoinDaemon.exe doesnot work.Thank you in advance for answer.
|
|
|
|
Hello i am trying to download wallet for for windows,but keep shoving error 404 page not found,please help i would like to start minning.Thank you
Hello! We are migrating servers right now, please try in about 4 hours! I will post here also when everything is done  Thank you for your interest in WDC! Thank you for reply,i will try later  |
|
|
|
|
Hello i am trying to download wallet for for windows,but keep shoving error 404 page not found,please help i would like to start minning.Thank you
|
|
|
|
|
