 Show Posts
|
|
Pages: [1]
|
I would like to thank custom work XFX RX480 non-reference GPU's modded BIOS by Eliovp (Heliox) 6X GPU 182Mh/s, 63watt/gpu GPUz and stable more than 1 week (continuous operation 0-24) So perfect job and perfect finish!!! Thank you Eliovp  wow - this is great results! which rom did you use from Heliox? Impressive 182MHs under 1000watts He did not say 63watt/gp from the wall. It is from the gpuz. So the total wattage could be more than 1000W from the wall. I think it is understandable: http://i68.tinypic.com/6ye651.jpghttp://i65.tinypic.com/2rcu93k.jpghttp://tinypic.com/r/1z73fc6/9 |
|
|
|
I would like to thank custom work XFX RX480 non-reference GPU's modded BIOS by Eliovp (Heliox) 6X GPU 182Mh/s, 63watt/gpu GPUz and stable more than 1 week (continuous operation 0-24) So perfect job and perfect finish!!! Thank you Eliovp can you point me to the .rom File? I'm sorry but this .rom custom work! So not public share |
|
|
|
@pho130
63 Watt per GPU and in total with 6 Cards 930 Watt??
6 * 63 = 378 Watt
That means over 500 Watt for CPU, Mainboard, Harddisk, etc., that is a lot.
GpuZ it is different than on the wall. So actual power consumption: 930watt i use 1000watt PSU (Platinum) |
|
|
|
I would like to thank custom work XFX RX480 non-reference GPU's modded BIOS by Eliovp (Heliox) 6X GPU 182Mh/s, 63watt/gpu GPUz and stable more than 1 week (continuous operation 0-24) So perfect job and perfect finish!!! Thank you Eliovp you have version 4gb or 8gb ? 8gb |
|
|
|
@pho130,
With with Bios you reach this value? Only 63 Watt for one GPU? I reach about 30 MH per GPU, but it needs about 90 Watt?
Yes, this value modded BIOS /GPU. On the wall ALL 930watt (6gpu,motherboard,etc) |
|
|
|
I would like to thank custom work XFX RX480 non-reference GPU's modded BIOS by Eliovp (Heliox) 6X GPU 182Mh/s, 63watt/gpu GPUz and stable more than 1 week (continuous operation 0-24) So perfect job and perfect finish!!! Thank you Eliovp |
|
|
|
Hi guys! It is possible that soon someone modding BIOS non-reference card (example XFX GTR XXX)  better performance and better energy efficiency! Currently MAX. 28 MHs and 83watt and stable more than 1 week and one more question: How is it possible to change by polaris bios editor TIMING? This hexadecimal?! Sorry for the stupid question but my not overclocking guru  Thank you! |
|
|
|
How to identify GPU 0, GPU 1, etc
So if I get an error, for example GPU 3 By process of elimination. Use "-di" option and watch on GPU load in some monitor. Thank you! |
|
|
|
Hi, How to identify GPU 0, GPU 1, etc So if I get an error, for example GPU 3 I need to check RIG from left to right gpu? or reverse order? I have 6 cards! Sorry for the dumb question Thank you! |
|
|
|
2X1000W, Corsair RM1000X (already ordered add2PSU but it has not arrived yet, so thus manual start)
I was unable to make work 3 390 (stock) on 1000W PSU, it failed in a few minutes of work, have to use 3 1000W PSU for 6 390. But 2 1200W can handle 6 390 in all my tests. I understand but "citronick" previous post use EVGA 1600W 6X390 GPU. So not understand why is not enough 2X1000W PSU in this case?! Thank you Claymore! I use -100mV/1015mhz/1500mhz setting using MSI Afterburner utility -- this setting under-clocks the 390s to be just under 1600 (sometimes it goes above 1600w). But fellow riggers have advised me not to do this because it will surely kill the PSU... If you want to keep the 6 card setup at stock clock speeds, confirm you need 2 PSUs or even 3 PSUs like Claymore mentioned. Each 390 at stock is I think 270w each. So 270 x 6 is already 1620w excluding mobo etc. Thank you Citronick and Claymore i used all settings and connected MOLEX so i now test |
|
|
|
2X1000W, Corsair RM1000X (already ordered add2PSU but it has not arrived yet, so thus manual start)
I was unable to make work 3 390 (stock) on 1000W PSU, it failed in a few minutes of work, have to use 3 1000W PSU for 6 390. But 2 1200W can handle 6 390 in all my tests. I understand but "citronick" previous post use EVGA 1600W 6X390 GPU. So not understand why is not enough 2X1000W PSU in this case?! Thank you Claymore! |
|
|
|
Hi Guys! Please help me. I have been completely hopeless  So my RIG: ASRock H97 Anniversary 3,2GHz Intel Pentium G3258 2X1000W, Corsair RM1000X (already ordered add2PSU but it has not arrived yet, so thus manual start) Samsung 160GB SSD 2X4GB, Furry HyperX 6X, Gygabyte 390 USB Riser Open RIG Crimson 15.12 Clean installation Windows 10 i set memory and setx I am using Claymore 3.3 The error: constantly crashes Max. Working rig, 8 hours, but usually down there after 2-3 hours I do not understand why?! The screen freezes ((( Temperature 67-75 ° C Not OC GPU but i tried 1050 mhz I use: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal address -eworker rigname -epsw x -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal user -dpsw pass -dcri 20 -r 1 What do I do wrong? Thank you!!!!!! My rig is similar to yours.... have you set windows virtual memory to minimum 16GB? I set: 8192-16000 so correct: 16000-32000? or 16000-16000? TH Minimum 16GB as per Claymore's guidelines (refer to 1st post). I use 16GB to 20GB. Another thing that I would check is the power cabling... the first power molex need to go the one next to 16x PCI slot, and the other end of the power molex goes to the other power socket near CPU. This a guideline I learned from Youtubers but some riggers say that this is no impact - anyways just try it so that you could fix your rig. I have a single 1600w EVGA to power a 6 card setup (MSI R9-390), using -100mV/1015mhz/1500mhz OC setting, to go just under 1600w, at 29.5 mhs per card. However, after much thought, I settled with 5 card setup, hitting 1290w-1450w, with the above settings to maximize the life of the expensive 1600w EVGA. OK i set 16384-20000 I will try this option. My RIG use max. 1700-1790W so I think sufficient two PSU (2000W) I have never used Molex just now Can you post a picture of the correct wiring? You do not know how grateful I am to you!!! |
|
|
|
Hi Guys! Please help me. I have been completely hopeless So my RIG: ASRock H97 Anniversary 3,2GHz Intel Pentium G3258 2X1000W, Corsair RM1000X (already ordered add2PSU but it has not arrived yet, so thus manual start) Samsung 160GB SSD 2X4GB, Furry HyperX 6X, Gygabyte 390 USB Riser Open RIG Crimson 15.12 Clean installation Windows 10 i set memory and setx I am using Claymore 3.3 The error: constantly crashes Max. Working rig, 8 hours, but usually down there after 2-3 hours I do not understand why?! The screen freezes ((( Temperature 67-75 ° C Not OC GPU but i tried 1050 mhz I use: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal address -eworker rigname -epsw x -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal user -dpsw pass -dcri 20 -r 1 What do I do wrong? Thank you!!!!!! My rig is similar to yours.... have you set windows virtual memory to minimum 16GB? I set: 8192-16000 so correct: 16000-32000? or 16000-16000? TH |
|
|
|
Hi Guys! Please help me. I have been completely hopeless So my RIG: ASRock H97 Anniversary 3,2GHz Intel Pentium G3258 2X1000W, Corsair RM1000X (already ordered add2PSU but it has not arrived yet, so thus manual start) Samsung 160GB SSD 2X4GB, Furry HyperX 6X, Gygabyte 390 USB Riser Open RIG Crimson 15.12 Clean installation Windows 10 i set memory and setx I am using Claymore 3.3 The error: constantly crashes Max. Working rig, 8 hours, but usually down there after 2-3 hours I do not understand why?! The screen freezes ((( Temperature 67-75 ° C Not OC GPU but i tried 1050 mhz I use: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal address -eworker rigname -epsw x -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal user -dpsw pass -dcri 20 -r 1 What do I do wrong? Thank you!!!!!! |
|
|
|
|
