Show Posts
|
Pages: [1]
|
Hey all, I have a few questions ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) First, I noticed in some users screenshots/vids of their wallet, the Nexus value was shown on right in NXS. On mine its NIRO ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Am I running the latest wallet? My wallet says 2.0.2 Also, when I am running the CPU miner, my balance shows as CSD. Will this amount get deposited as Nexus to my wallet? Last one, My main rigs are running AMD cards. So far I'm getting these hashrates. Windows 8/10. 15.12 drivers ASUS 380 -- 22-27mh Intensity 23/overclocked memory Sapphire 390x -- 65mh Intensity 25 stock clocks/undervolted in afterburner XFX NANO -- 55mh Xintensity 1064 900core/300mem and -50mV core My question is, I have a laptop with a 770M GPU. When I run the Cuda miner on it, I'm getting a hashrate of 150,000,000Kh/s. Is this 150Mh? Are Nvidia cards just a lot better at GPU hashing this coin? This is a laptop gpu? Sorry if these have been asked before. Im still messing with the intensities haven't had a lot of time to test. Are my numbers close to anyone elses? ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
|
|
Any AMD miners? I'm getting 24Mh on a 380 and around 58-62mh on a 390. Does this seem normal?
Linux or Windows? Windows 8.1 and 10
|
|
|
Any AMD miners? I'm getting 24Mh on a 380 and around 58-62mh on a 390. Does this seem normal?
|
|
|
Is there a GPU pool available?
|
|
|
Hello eveyone,
I'm very noob here, just a few question as I have read through the whole 19 pages already but wasn't able to find the answer. On the r9 390, I see that you guys have posted the maxim efficiency settings but I can't seem to find how much power each rig draws. For example what would a r9 390 x 6 rig draw on power and so forth.
Thank you for the time to read and answer this noob question!
I am running 5 sapphire 390x cards w/ backplate. Im using 1500axi and 750w runs board and 1 card. I usually go -75mv undervolt in case my miner stops. Sometimes if it stops with a heavy undervolt the rig crashes. My 4 on the 1500axi show 255 watts at stock settings 1080/1500 they get 30.2 Mh this way at 59-61C. You can juice them pretty high. At 330-350 watts I get 35-36Mh.
|
|
|
If anyone is trying to keep track of bad cards, mine are XFX Nanos purchased from Amazon beginning of April. They crash after 950Mhz on elivops -100mV rom with +100mV in afterburner. Using powered USB risers and H81 BTC board. Plugging in molex let me push them to 970Mhz before crashing. I'm going to try the -25mV roms the person above uploaded and test them.
|
|
|
I am testing the ROKOS raspberryPi solution - where greatly, SOIL is included. - really ... consider to get yourself an rPi3 (+ transparent case + HDMI cable + 2.5A USB 5V mains adapter + 8GB or 16GB microSD (get fastest one) + small external 2.5'' HD) ... for << 100 dollars, it is worth it! --- EDIT: SOIL-addPeers.jsEDIT: If you like this, you can show it: [soil] 0x8da4fc05ca343e6a41646194e91931d9f413a40cSweet, I bought one yesterday to run a node for my miners and monitor the temps in the building.
|
|
|
Citronik, I owe you a case of beer, I plugged in the 2 motherboard molexs and its working fine now ![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
|
|
|
Using CDM v4.5, ethpool.org and for both rigs below, 0% invalids. Powered risers and molex. '
H81-BTC/Celeron1840/W81/8GB RAM/120GB SSD/EVGA1600/USB3 Powered risers.
MSI R9-390: -100mV, 1050mhz, 1125mhz, 30MHs per card, 5 x 390 = 150MHs, temps=75-76c
Sapphire Nano: -150mV rom mod, 1040mhz, 300mhz, 29-30MHs, 6 x Nano = 177.8MHs, temps=74-75c
Ill try plugging in the molex if you're getting that low of mV on 390s. I can go to about -75mv but if my miner dies or I close it the system crashes. Mine hash at 28 with stock core clocks. Your temps are way hotter than me though, I never go above 65C? This is in the top floor of a building that stays 85-95F. My cards are vertical. I'm using powered USB risers also, didn't mention that before. H81, i5, 8GB ram, SSD, ax1500i psu. I've been having really bad luck with CDM 4.3-4.5, won't connect to servers or it crashes randomly. Rolled back to 4.1. @Eliovp, will that 390 rom work with a 390x sapphire Nitro? the silver not the gold?
|
|
|
I mine with the ethpool.org. I noticed that my 6x nano has more stable shares (6-10%) than the 6x390 (1-3%). Anybody has similar experience?
What miner are you using? I've tried every miner and I use claymore dual miner now (1.4 is best). It works the best for me. I get 0 invalid shares on 5 390x sapphires, 6 380 strix, and 5 XFX Nanos. Using windows 8.1. My hashrates and settings are 5-390x 30Mh/s per card 1110mhz/1501mhz -37Mv 0% power. I am using 1450 watts and mining at 152Mh/s average. They can go as high as 33Mh from what ive tested. I will get invalids going that high. 5-Nanos Im using the -75mV VDDC, -100mV MVDDC Rom Claymore Dual miner, ive been able to run Decred on it and be stable too with decred intensity 15. This adds 80 watts and 4C to temps. +96Mv/100% power 975Mhz/300Mhz Getting 28.5Mh per card on miner, 140Mh average on pool ethermine:14444. Im using 900 watts. My 380s dont get invalids either.
|
|
|
On a stock Nano is there a difference in the bios if I flip the switch? Or are they both the same? I want to flash left position with stock bios from right, then flash right with modded bios and try that way. If they are different though, can someone upload the two stock roms? Still having problems that the guy above was having, if I go over 950Mhz core it gets laggy and dies. Then if I want to start again I have to DDU and reinstall 16.1 drivers. Im powering down and unplugging electricity too ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) The main and backup bios is the same. You just need a add some voltage to the Core. I have similar issues. Ive added +100mv and 100% power on afterburner, still no luck. How did you add more power to core? You have to use the Sapphire Trixx. It allow 200mV higher or lower. I used it for my R9 390 rigs. Mrmaroon, you should check out other things for your issue mate, like i said several times, 100 nano's here, not one with any issues like that.. Asdalani, i flashed bios with the one a few posts above. This has allowed me to run at 975Mv so 28 Mh/s per card. Ill try Trixx on the Nanos, when i used it before on 390s I couldn't find a way to change settings across all cards at once. Is there a way to link similar cards like AB? Eliovp, Sorry man ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I am happy with this ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) ! But still want to figure out why its crashing before 1000. I know its something i'm not seeing, I appreciate the help! Ive read this whole thread like 5 or 6 times ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) Citronik, I thought about adding the Mobo molex connectors, but everywhere I read said not to with powered risers. Some people said they were melting cables ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) I will try it with one and both connectors today. I figured Nanos didn't draw enough to need them. My 5 390x sapphires don't have them plugged in and they overclock normally if I try it. I undervolt them as much as possible tho. I'll try and learn more about it. Also I was running 16.1.1 drivers and when it crashed I would have to F8->safemode->DDU-> reinstall drivers - Or I just got a black screen after windows. When I switched to 16.4.2 I haven't had this issue after crashing. Maybe this will save you some time. I think the black screen was from afterburner. When it crashed (atiksysdag or machine_check) it would try and keep my high clock settings, but set the voltage and power% back to 0. So the cards would insta-crash. In safe mode I delete the afterburner profiles from folder. Then I can reboot without DDU.
|
|
|
Hey guys! I just found your awesome coin! I am trying to help you out by mining, but cant get my node to get past Listening on xxxxx: So I connected my miners to your pool.soil.xyz pool. I think there may be a problem, there have been no payouts for 5 days? I will let it run tonight, I don't know who is in charge of the pool - if they are trustworthy I will continue using the pool with my 380 miner rig! I live on a decent sized farm - we use GPS and other tech stuff (expensive!), so I will help mining when I can ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Would love to see this become something great. Glad someone thought of it, I can explain crypto to old farmers a little better now ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Edit: Someone must have seen this, it looks like payouts are working again. I left my 380s on the pool. Ill try and figure out the blockchain syncing when I have time. I tried adding the enodes but no change. I tried SOILsafe too. It get stuck on "soil node needs to sync" listening on 39420. Its been like that for hours. Ive been using an exchange address for mining.
|
|
|
On a stock Nano is there a difference in the bios if I flip the switch? Or are they both the same? I want to flash left position with stock bios from right, then flash right with modded bios and try that way. If they are different though, can someone upload the two stock roms? Still having problems that the guy above was having, if I go over 950Mhz core it gets laggy and dies. Then if I want to start again I have to DDU and reinstall 16.1 drivers. Im powering down and unplugging electricity too ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) The main and backup bios is the same. You just need a add some voltage to the Core. I have similar issues. Ive added +100mv and 100% power on afterburner, still no luck. How did you add more power to core?
|
|
|
On a stock Nano is there a difference in the bios if I flip the switch? Or are they both the same? I want to flash left position with stock bios from right, then flash right with modded bios and try that way. If they are different though, can someone upload the two stock roms? Still having problems that the guy above was having, if I go over 950Mhz core it gets laggy and dies. Then if I want to start again I have to DDU and reinstall 16.1 drivers. Im powering down and unplugging electricity too ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
Citronick.
Try atiflash -i or -ai and make sure the devices are being listed at the dos prompt.. your command line looks correct. no it is wrong my bad
a -f -p 0 DPM-100mV.rom
first run the command above making sure you assign the right slot with the -p command.. its either going to be slot 1 or 0
Best Regards d57heinz
In Eliovops readme it says to use -p -f "slot" maybe that is what im messing up? edit: It does say in atiflash help to use -p "slot" "file"
|
|
|
Are you guys running 1000Mhz plus running without a monitor? Still cant hit above 960mhz and im running my monitor on low res off a 380 strix card? Would that still affect the cards on risers?
|
|
|
I have a question...
I run my Nano's at -96mv In afterburner with a -25% Power Limit. (55.3MH for the pair) Whole rig with i7-3770k (330Watts from the wall)
Core and Mem @ 1020/500
However....
When I Flash the cards to 800/300... -100mv
I cant over clock the core to 1000 without it crashing....
Not sure what else I could try?
Ive been having this problem too, from what i have tested on stock ROM with afterburner - voltage -100mv and a power limit of like 5-10% will run the cards at 1000mhz stock. They get throttled hard by running hot though. The cooler you can keep them the faster they will be able to run. My cards this way use 950 watts on corsair Link. Has speed on cards varies, because they are getting hot between 62C-70C. Cool ones run 28mh, hot ones 23-25mh/s. I've messed with flashing quite a bit. I have not been able to get a 1000mhz clock. I have 5 XFX nanos/H81 BTC pro/ax1500i PSU/i5/windows 8.1/Powered USB risers and 1 card on the board. I flashed with the mildest ROM, I think the -100mV.ROM. If in afterburner i put voltage at +50 and power limit at +25% I can get the cards to run at like 920Mhz. Any more than that and the screen lags and I get black screen flashes until the whole thing crashes. Im running 16.1 drivers. This is running with a monitor attached, but not turned on. IIve been using google chrome remote desktop. If I try to do it powering a monitor it will crash out at like 815mhz instead of 915. I turned all appearance settings to performance in control panel. Running like this im using I think 600-650 watts and getting 27Mh/s on each card from them running cooler. Also, at first I thought my cards werent working. If I would reboot, it would post and then hang on a black screen for like 1 minute. I always reset thinking it was froze. Instead I accidentally left it and it finally opened windows. I think the new roms must not feature fast boot. Maybe we need like a -50Mv core volt, 1000mhz core, or maybe a 400mhz memory? I'm not up to speed on all of it though ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|