I just got my miner, but i have an issue..
I pin power supply and patch cable for net, i reset the miner and i get a red faulty LED.
Can you guys give me some directions what could be the problem with my miner?
Thanks.

I changed the cable from 3x50mm2 to 3x150mm2 cable and now works great, mining second day.
About the firmware i downloaded 600M firmware, i extract it and im not sure which one file is Flash Image.. i guess i have to insert the "angstrom_roofts.jffs2" file in the browse field? (there is 3 more files "runme.sh", "soc_system.rbf" and "upgrade-marker.bin")

Now i got another question? Why do i need to put the ip from dynamic to static?
Which one firmware should i install (update)? As i saw my S9 works on 600M i suppose that is the one i need?
Also i got another issue with the power supply cable.. 15min of work and it start melting from the electricity power.. need to get another one tomorow maybe stronger.. lucky i checked the power cable

The problem was in the lan cable. Missunderstood at the start, i took a cheap crossover cable which is used for pc->pc connection. After i tried everything and cannot find the problem, start thinking that i have some defect in the antminer hardware but lucky me a person on youtube suggested me that i might got a wrong lan cable. Run to the cable store and get a patch lan cable (router->pc) and now everything works perfect.
I will stay to this forum there is a lot of good stuffs to read and learn, also a very experienced members. Thanks again.
[/quote]

It's good to hear that you'll remain on this forum. I'm a bit confused on the difference of both of those cables as I have built ethernet cables and there isn't much differences.
[/quote]

Well i changed the cable and the antminer started working.. After i researched about lan cable and show me that there is 2 types of lan cable (crossover and patch)

The problem was in the lan cable. Missunderstood at the start, i took a cheap crossover cable which is used for pc->pc connection. After i tried everything and cannot find the problem, start thinking that i have some defect in the antminer hardware but lucky me a person on youtube suggested me that i might got a wrong lan cable. Run to the cable store and get a patch lan cable (router->pc) and now everything works perfect.
I will stay to this forum there is a lot of good stuffs to read and learn, also a very experienced members. Thanks again.

I made it guys, the problem was in the lan cable. I bought a crossover cable, and i need patch. Bought patch cable and now im gonna set it. Finally the ship has sailed  , thanks for your time and support.

I also send a mail to support to bitmain, they are saying that BB board is deffective and give me directions to switch the issued bb board with another good bb board and test the device. I also have only 1 s9 and its first in my country so no chance to this test on my own.
On some videos i saw red led blinking in hash boards and i dont see it on mine, also reset button works, when inserted lan cable it blinks green and orange but same as red fault led, and when i press ip report button i dont get any beep sound.

Im kinda new to this so i dont know the terms very good, so gui is the main window that is opening when i insert the ip of antminer right? I cant reach that point to change the ip to static as it says step by step on this link http://megabytee.com/how-to-configure-s7-miner-to-join-antpool/ (step 2). I though i need to find the ip of miner to come to this stage?

Hello guys, im new here i just bought my first antminer s9 set the power supply lan same as described in video and starting the antminer, i installed ip scanner. After 5 min s9 working it starts blinking red fault led and when i scan for ip it dont show me the ip adress. Lan cabel is connected to wifi router of home adsl internet network. Please suggest me what to do because i have this issue 3-4 days im getting nervous i have the miner at my home doing nothig.. Thanks for your support i hope some1 will help me solve this problem.