 Show Posts
|
|
Pages: [1] 2 3 »
|
|
How is the command to closed mined if something is wrong?
|
|
|
|
|
Hello
I have a rig of 6x 390x.
What risers are recommended for 390 cards?
If is possible send the link of Amazon o another web site
Thanks
|
|
|
|
|
How do i represent core voltaje -60 in claymore line commands? I want to undervolt using the claymore bat.
Thanks
|
|
|
|
|
Hello
How do i represent core voltaje -60 in claymore line commands? I want to undervolt using the claymore bat.
Thanks
|
|
|
|
I am getting this crash after a couple of hours of mining (r9 380x is gpu affected) - 2 380x and 1 rx480, running on 16.60 drivers. maybe i need to uninstall those drivers and install 15.12? Hope I can find those drivers online.
WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit
WATCHDOG: GPU 1 hanges in OpenCL call, exit
And then system hangs.
Connect it directly to the mobo |
|
|
|
|
Hello
I want to buy new risers. Witch is better one? What version can i bought on Amazon?
|
|
|
|
|
Hola
Por error envié una cantidad de btc a una dirección de bitcoindark btcd. Use Poloniex
Al no ser una dirección btc válida será que devuelven la transacción? O doy eso por perdido?
Gracias
|
|
|
|
|
Hello
How can i controller the fan and the oc settina of my asus rx 470 4gb. In after burned i can not change any Valor.
Thanks
|
|
|
|
|
Hello
Today what is better?
Mining zcash, etc o eth?
|
|
|
|
|
Hello
What gtm used nicehash?
I need to know the hour of my the paid in my country
|
|
|
|
|
Hello
Gpu go to off in miner 3.1 what happen?
|
|
|
|
Hello
Its a 1300w edga gold power supply enough to dual mining with 6x of msi r9 390x?
Not really, you will need to undervolt a lot and maybe underclock, and run low -dcri. Even then you are pushing limits of it, consider dual PSUs. Their total TDP is 1650w. Someone on this forum does it, and it is very unstable. Hello, And 1300w for 4x msi r9 390x its possible? 4 would probably work, would still want to undervolt just to lessen load a bit. how much i undervolt? |
|
|
|
Hello
Its a 1300w edga gold power supply enough to dual mining with 6x of msi r9 390x?
Not really, you will need to undervolt a lot and maybe underclock, and run low -dcri. Even then you are pushing limits of it, consider dual PSUs. Their total TDP is 1650w. Someone on this forum does it, and it is very unstable. Hello, And 1300w for 4x msi r9 390x its possible? |
|
|
|
|
Hello
Its a 1300w edga gold power supply enough to dual mining with 6x of msi r9 390x?
|
|
|
|
|
Hello
Its possible that claymore bat send a email to me when miner stopped?
Thanks
|
|
|
|
Today got an error
OpenCL on GPU one crashed. Watchdog exited but the miner is unable to restart. Hands whole system.
Any solution?
Power off / Power on... Not what you wanted to hear but... It's a solution.. I get the same problem occasionally, Try looking at the problematic card, Down-clocking it etc. I think this is more random problem. I upgraded drivers from 16.7.3 to 16.8 and it worked well over night. I guess it will keep on working well. I was thinking about using -r option to set 30 min time to force reboot and then keep bat file in the startup with delay of 30 sec. But that means I will lose 3-5% mininig time further. But anyway, so far so good.. it is working for now  thanx for your advice I have a similar problem. Gpu 4 failed in open cl call , after a time this freeze the system. Some time the gpu work for a hours and sometimes for a few minutes. Your udgrade drivers? |
|
|
|
|
Hello claymore
The -di command disable/enable the ports on the mobo? Or the gpu?
|
|
|
|
|
Hello
How i make that my bat closed and open after a gpu fall ?
|
|
|
|
Hello Claymore. I've been using your miner for 30+ Radeon 480's and several 390's / Fury X's. Great software with very little problems. I have recommended your software to all my mining friends which they use. I hope you can help with a problem. I purchased a single Geforce 1070 and cannot get it to mine. I'm running Windows 10 Anniversary update with the latest drivers. I've used the same working batch file that work with my Radeons. When I launch my batch file I get an error from EthDcrMiner64.exe (latest version 7) saying "The program can't start because OpenCL.DLL is missing from your computer. Try reinstalling the program to fix this problem." I have verified OpenCL.dll exists on my Windows system. I tried copying opencl.dll locally to the root mining folder (with the EthDcrMiner exe) and I get an error stating "The application was unable to start correctly (0X000007B). Click OK to close the application." After some Googling I read new Nivida drivers corrupt OpenCL.dll when overwriting the file. So tired repair instructions listed under this website https://appuals.com/repair-corrupt-opencl-dll-in-windows-10/ which did not help me. I'm a total newbie with Nvidia Pascal mining, can you please help? I read through your readme documentation and I see nothing specific to Nvidia cards that I should be doing to get this working. I'm at a loss and need your help. Thanks in advance! try with just the basics first meaning just the pool/s configuration for mining. If you didn't change the start.bat file just try that. I have to 1060 3GB that I have used since he added NV support without issue. Also If you didn't do a clean install of your drivers for NVidia for windows 10 after the update it causes problems. Thanks for the reply. I didn't make any changes to my working batch file. I simply ran it after the anniversary update and it complained about OpenCL missing. I just ran DDU and reinstalling the Nvidia drivers recommended on the first page. My batch file for reference looks like this: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Mining_Address.MinerName -epsw x Nevermind. I updated to the latest DDU verson, uninstalled previous driver in safe mode and installed the recommended drivers on the first page and now I'm mining away with my ITX Gigabyte 1070! Thanks for your help. Seems to be working fine. Mining speeds are a little lower then expected at 24.5 - 25Mh. I haven't done any overclocking at all, this is just stock. I believe this card has Micron memory (according to GPU-Z) so I'm not sure if that's going to hold it back but I'll report back my hashes after overclocking. Happy now! Next project, flash 32 Radeon 480's with custom BIOS to bring up overall hash speeds 100+Mh. This will take a while heh. What's the recommended remote desktop software around here? TeamViewer? OK spent a few hours tweaking power settings and overclocking / underclocking. I think I have pretty decent results for this tiny ITX Gigabyte 1070, what do you think?  Nvidia cards aren't as good for Ethereum costwise. They do OK, but not for the cost. They don't dual mine as well either. Currently it is better to min LBRY with them. I can get ~$50-55/month from a 470 with stock clocks, on Eth+Sia. A 1060 3GB gets $40/month for similar cost. However LBRY it will get ~$50/month. So it is still profitable on them, just somewhat better to do LBRY right now, but it also depends on price/difficulty of that, which moves a lot. There is a private miner for LBRY, but I don't like the idea of paying for miner, that also has a high devfee, with only slightly faster hashing, and wouldn't be worth it unless you had multiple nvidia rigs. From the thread on it, it is also unstable at some pools due to poor network code. The dev isn't really friendly either. Thanks. Appreciate the feedback. I'm well aware Radeon's are better for mining Ether, hence why I'm mining at over a Gh with 30+ cards already. I bought the 1070 as I needed a low powered ITX card to fit in my HTPC and serve double duty. As for mining some altcoin like LBRY I generally don't bother with as I mine Ether and hold with the expectation it'll rise in value over the next few years. These alt coins (and LBRY looks like something that's being done in Ethereum anyway) come and go and are mainly good if you are immediately trading. I'll keep my eye on it but for now I rather get another 30Mh out of this 1070 mining Ether. Why is your memory clock so low on your GTX 1070 in your picture it says it's set to 1350 and I'm assuming that is its base frequency which means its only running at 5400 Mhz effective on your 1070 which is really low. it should be closer to 8000 effective if not hight Low memory clock is not better to mining? |
|
|
|
|
