Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.
This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!
I tried different versions of claymore but it just stops working after a while
This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!
I tried different versions of claymore but it just stops working after a while
Quote
08:32:00:891 1208 Miner thread hangs, need to restart miner!
08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882 8b8
08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009 8b8 Incorrect ETH shares: none
08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0
08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090 8b8
08:32:01:961 1208 Restarting OK, exit...
08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:00:882 8b8
08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units
08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units
08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units
08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units
08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units
08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units
08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49
08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
08:32:01:009 8b8 Incorrect ETH shares: none
08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0
08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113
08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53%
08:32:01:090 8b8
08:32:01:961 1208 Restarting OK, exit...
Have you tried to raise priority of EthDcrMiner64 to HIGH ?
I did this, but miner stopped again
Are you fix the problem
i have the same