Show Posts
|
Pages: [1]
|
Are the S17 Pro's just as bad as the other 17 range?
|
|
|
Braiins OS+ 21.09 release: new features and beta for S19, T19 & S19 ProBraiins | pool, firmware & protocol- Major release that overhauls the web interface, adds languages and features
- Early access for beta testers of S19, T19 & S19 Pro - see the dedicated section below
New features for all models:- [feature] new web interface, with responsive design (mobile ready), dark mode and multi-languages support (ES, RU, FA, ZH)
- [feature] firmware running from SD card now support upgrade and auto-upgrade (same as firmware running from internal NAND memory)
- [feature] firmware automatically pauses mining if there are no online pools in your settings, minimizing the power consumption and will automatically start mining once at least one pool comes online
- [x17 specific feature] Improved Model Detection functionality, to cover situations where all 3 hashboards have invalid EEPROMs from a different model. Scenario: you have a second hand S17 and the previous owner has rewritten the hashboard EEPROMs with T17e profiles
Known Issues:- Kaspersky Antivirus may block the web GUI
- [S9] Wrong DPS default minimum power limit value = 100 W
- [x19] Sometimes invalid Power usage data
- [x19] Inconsistency in data shown in GUI Dashboard
- [x19] No chip temperature in GUI Dashboard
S19, T19 & S19 Pro - EARLY ACCESS- Access to early beta is possible only if you swap your x19 control board for an x17 control board. This is due to locked x19 control boards. Installation details can be found below. An alternative installation method will be available for the official public release.
- This is an early beta to gather feedback. We appreciate any enthusiasts taking part to provide feedback via our Help Desk.
- Not currently supported: S19i, S19j, S19j Pro, S19+ so signup for updates here!
Installation:EARLY ACCESS Antminer S19, T19 & S19 Pro: to run the firmware on x19, replace the x19 control board with an x17 control board. Note that the C49 control board (used in S17/Pro and T17) has smaller dimensions and the cables might not be long enough to reach the hash boards of the x19. Continue with the standard x17 installation method ( SD card method) or update the firmware to 21.09 if Braiins OS+ is already installed on the control board. The 21.09 firmware will detect whether it is being installed on an x19 (with x17 control board) model. You can always revert back to stock firmware for x17 on that control board. An alternative installation method will be available for the official public release.For new installation from Stock firmware (x17 & S9): see documentation. Automatic update:if your current Braiins OS+ has auto-update enabled your device will be updated automatically. Manual update:- You can also update using the web interface: flash the firmware by navigating to top-menu > System > Backup/Flash Firmware > Flash new firmware image >
S9 (click here to download) or x17 (click here to download) - Update in single/batch mode using BOS Toolbox Install tab > type your device IP address (or IPlist.txt) in the Miner(s) field and type the device password and click Start button.
What type of performance increases numbers being seen in the 19's seen?
|
|
|
Sooo bringing in $50k worth of T17's 42Th/s is starting to look/sound like a bad idea....
Am I in for a world of pain? - No, I haven't bought them yet.
|
|
|
Loving this miner!
Just a quick query, is there any built in hash rate monitoring? Did I miss it?
Sometimes Vega's are dropping hash and a hash watch dog where you can set a threshold before the miner restarts would be awesome!
|
|
|
24 Vega 64's here waiting for Windows.
Is it possible to have more than 6 Vega per rig?
|
|
|
I may of missed it but does the latest version not need any changes or switches on/off to enable V7? It will just carry on mining once the fork happens?
|
|
|
@pluradev,
Keep getting IP Banned errors on the pool while mining every so often. Why is this happening?
|
|
|
Guys, I'm confused here.
Am I right in saying that ETC and ETH, although using the same algorithm, they shouldn't be at the same Epoch number?
When I'm mining ETC, the miner is using Epoch 133 which afaik, is the same Epoch as ETH. Thus reducing hash speeds.
Is this normal? Surely ETC's epoch is reduced in comparison to ETH's
|
|
|
Question...
Is it even worth getting one of these units, since they shipping for August 15th? Do you ever ROI with a ASIC?
|
|
|
Not sure if it's part of the stability problems or not but my miner on my 4x470 rig keeps crashing. The EthDcrMiner64.exe keeps crashing, it's just the miner.
PC doesn't freeze etc.
Is this a bad card acting up or stability issues in 9.x?
|
|
|
Hi all,
Please assist, I have about 215 PASL but bit confused how I cash them out to Cryptopia.
Do I use my address as follows? 50-70.dd273193f676c881534eda6308b2fd46982cd91122f6b644b8d4008b80459d92 to cashout from SuprNova mining pool?
|
|
|
RIG with 6 x R9 390 with -i 2 45 hs per card with -i 0 95 hs per card
Check CPU usage, my 3 290x's are maxing out my PD 2020 CPU at 100% with -i 2
|
|
|
Averaging over the last 6 hours 278Sols/s over 5 290X's and 1 7970, using 16.9.2, been stable for over 12 hours overclocked!
I probably should switch to 15.2 but all the cards are running at speeds I've seen here.
Thanks so much @Claymore. More than happy to use the donate feature
|
|
|
Getting OpenCL Error -48 /build/xmpclient/src/zcash/zcashgpuclient_silent.cpp:242 at client launch on my rig full of 3 290's Windows 7 64Bit, 16.2.1, and they only mining at 14Sol, what's going on here? ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|