 Show Posts
|
|
Pages: [1] 2 »
|
Anyone mining on epool.io My settings are not working with the pool on simpleminingnet.... -wd 1 -r 1 -epool stratum+tcp://uk.etc.epool.io:8008 -ewal wallet/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -allcoins 1 -dpool stratum+tcp://siamining.com:7777 -dwal wallet/$rigName -dcoin sia -dcri 30  |
|
|
|
|
Is LBRY/DRC going to add anytime soon?
keep up the good work.
|
|
|
|
Myr-gr and groestl sp-mod #1 available for a 0.05BTC donation Pm for details.  Hello sp_, Can you tell me what are your numbers on groestl and myr-groestl @112w (60% on my design) for a GTX 1070, thanks Will cost you another 0.05BTC  |
|
|
|
Zcoin Mining Pool Hubhttps://zcoin.miningpoolhub.comZcoin pool fork compensation credited. As Zcoin dev sent 400 XZC to us, pool distributed x5 of 20594, 20616 block reward for each accounts. Thanks. How do you add Zcoin to MiltipoolMinerV2? Add a file to the miners folder. Copy one of the existing files then edit in notepad. Will add soon but been very busy ATM. [ { "Type": "NVIDIA", "Path": ".\\Bin\\Zcoin\\ccminer.exe", "Arguments": "--server $($Pools.Lyra2z.Host) --user $($Pools.Lyra2z.User) --pass x --port $($Pools.Lyra2z.Port)", "HashRates": {"Lyra2z": "$($Stats.Zcoin_Lyra2z_HashRate.Day)"}, "API": "Wrapper", "Port": "0", "Wrap": true } ] Something like this? am learning fast... It looks like you have got it but the API is wrong, I guess it will be the one from ccminer. Though the wrapper may work the proper API is better. It looks for port 17025....  Update... Think I have worked it out. |
|
|
|
Zcoin Mining Pool Hubhttps://zcoin.miningpoolhub.comZcoin pool fork compensation credited. As Zcoin dev sent 400 XZC to us, pool distributed x5 of 20594, 20616 block reward for each accounts. Thanks. How do you add Zcoin to MiltipoolMinerV2? Add a file to the miners folder. Copy one of the existing files then edit in notepad. Will add soon but been very busy ATM. [ { "Type": "NVIDIA", "Path": ".\\Bin\\Zcoin\\ccminer.exe", "Arguments": "--server $($Pools.Lyra2z.Host) --user $($Pools.Lyra2z.User) --pass x --port $($Pools.Lyra2z.Port)", "HashRates": {"Lyra2z": "$($Stats.Zcoin_Lyra2z_HashRate.Day)"}, "API": "Wrapper", "Port": "0", "Wrap": true } ] Something like this? am learning fast... |
|
|
|
|
use msi voltage/frequency curve editor
that will get you around 80w-85w
|
|
|
|
Zcoin Mining Pool Hubhttps://zcoin.miningpoolhub.comZcoin pool fork compensation credited. As Zcoin dev sent 400 XZC to us, pool distributed x5 of 20594, 20616 block reward for each accounts. Thanks. How do you add Zcoin to MiltipoolMinerV2? |
|
|
|
any one with zotac 1060 mini? whats the hashrate? any heat issues? only 1 fan.
Would also like to know. Getting cheaper in my country. 1060 seems to be pretty cool compared to 1070 and 1080 I bought one 1060-mini to test it out, and it performed almost the same as a dual-fan card. Almost.. I found it hard to control the heat from a "max out OC", it was running too hot and too stressed out for my likings. Then again I did not test it fully out with normal clocks or under clock (I was not going to use it that way). I swapped mine for a dualfan and since that I bought 24 more 1060's. Rock solid setup, 5 cards pr rig and they are running maxed out OC with ver. 0.2.0b miner, and they are using "solver 0", temps 65-68c. 300~5 sol pr card (3bg) are my results and exp with the 1060's. Thanks. Will go for the dual fan. I must add: I'm in a cool environment, and have very good ventilation where the rigs are located. 3gb 1060 runs @ 300 sol? Not too shabby! How many sol's at factory speeds? My 1060 3GB cards run at 275 Sol and 80-82watts.. 555watts for a full system |
|
|
|
|
Question, How do you Run 1 card out of 2 with the start up bat file?
Looked at most of the posts in here, and cant seem to find the command for it.
|
|
|
|
@philipma1957 the "idle" is that high because I use the two cpu's for mining as well  Those are quite heavy cpu's and they consume a lot but I'm not talking here about the CPU. Its all about the GPU's  Idle time is just to show how much power two 480's are using. So basicly you can say a RX480 Nitro+ 8GB consumes around 156,5w and generates a hashrate of 845-850 h/s for monero. (603w - 290 / 2). This is not bad but you cannot compare this to your panda miner! Total other GPU cards (MXM!). Ah and by the way, a panda miner is using around 390-400w in idle modues  There's just no way a RX would be taking 300w here. I get about 100w per RX for 740h/s with common bios mod + undervolt, 40w for intel skeleton. 640w~ for 4450h/s~ with basic mod, 5100h/s~ with more advanced for very small draw raise. I do *way* better than pandaminer. The interest in pandaminer lies elsewhere. If you're not going for easy deploy/stack. Custom rigs are much cheaper, more hash. I don't know how the MXM fare if/can once undervolted to save power. At stock the draw is pretty damn high. Haha, yes Virosa, you can advertise as well Anyhow, The rom i gave him has no undervolt whatsoever. I didn't even touch that :p So i'm not 100 but 200% sure that i can lower that powerdraw significantly  Still.. 850h stable as a rock Know we have talked about it Eliovp... just to clear up, what kind of watts/powerdraw could you lower it to? roughly? |
|
|
|
I've already posted this before, but on average you should see 285-295 sol/sec @ 90W. Settings: - Power Limit: 75
- Core: +185
- Memory: + 550
tell me please, core +185 from base freq (1500) or boot freq (1860) My GPU after start mining auto boost to 1860 Mhz. Sry for my Eng) is this the 3gb version getting almost 300 sol? Amph, I have the 3gb version, Asus 1060 3gb, I do get 290+ on all of my cards. I have 7 with a msi z97 gaming 5 and I can get 2050 SOL/s out of it +160 core +560 Mem What watts is that running at from the wall? or by nvidiaInspector? Should be less than 950, I have 6 running now, get my last card in tom. on my plug I have the rig, small 5 port network switch, monitor (which takes about 30 watts) and I also have 7 usb fans running from the MB. It currently reads around 840 with a killowatt plug. I can post pics tomorrow after I get my 7th card running, that should get me to 2050 or so Thank you Trying to work out the 1050 ti hashrate and power draw for like the EVGA cards. |
|
|
|
I've already posted this before, but on average you should see 285-295 sol/sec @ 90W. Settings: - Power Limit: 75
- Core: +185
- Memory: + 550
tell me please, core +185 from base freq (1500) or boot freq (1860) My GPU after start mining auto boost to 1860 Mhz. Sry for my Eng) is this the 3gb version getting almost 300 sol? Amph, I have the 3gb version, Asus 1060 3gb, I do get 290+ on all of my cards. I have 7 with a msi z97 gaming 5 and I can get 2050 SOL/s out of it +160 core +560 Mem What watts is that running at from the wall? or by nvidiaInspector? |
|
|
|
I have GTX 1060 6Gb G1 about 315-320sol with win 10 anniversary 1607 update, without update i have 280sol....same clock.
What watts is that running at? |
|
|
|
Say you want to mine to poloniex....
do we put...
86646-64.PAYLOADID
or 86646.PAYLOADID
any help would be great
I put "86646-64" in my .bat file, and nanopool removed the "-64" from my stats page automatically. I think that's your answer. In fact, in the last few minutes, it's changed from "86646.PAYLOADID" to "Account: Poloniex" haha. Thank you |
|
|
|
|
