Latest posts of: webgkv

Quote from: webgkv on August 13, 2019, 02:36:25 PM

Quote from: Claymore on August 01, 2019, 03:37:15 PM

I will release v14.8 within a few days, it will set environment variables automatically too, right now you can use b747 if you have problems with DAG on 4GB AMD cards.

Hi! Can we expect in v14.8 straps for linux?
Is this even possible?

Linux is out of deal again Sad

Quote from: Claymore on August 01, 2019, 03:37:15 PM

I will release v14.8 within a few days, it will set environment variables automatically too, right now you can use b747 if you have problems with DAG on 4GB AMD cards.

Hi! Can we expect in v14.8 straps for linux?
Is this even possible?

Quote from: kerney666 on February 17, 2019, 09:26:11 PM

Please run with —debug and dump the output of a failed init run here or in a pm to me. Tbh, the only similar issues I’ve seen have been due to unstable mem oc. Does this happen at all clocks, incl stock? Moreover, do you run anything else on the rig concurrently, any cpu mining etc?

Thanks for the answer! Looks like the problem was in CPU mining. The RX470 rigs haves more powerful processors from Intel are installed - Intel Pentium G4400, since there are 6 cards each, and the RX580 rigs have processors from AMD - Athlon X4 845 (work with 4 cards) and Phemon II X2 B59 (work with 2 cards).

I understand it, if run the lyra2rev3, it can not use the CPU mining?

All rigs with ASUS ROG RX580 8Gb have initialization Issues and the miner starts successfully only about one in ten times. Also cards ASUS ROG RX570 work fully successfully.
Please correct!

greenTea v0.4.4.1 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Bminer-14.3.1
- Gminer-1.32 (for win10 you need uncomment specify in Config.ini ExcludeMiners_NVIDIA = N-GminerWIN7* )
- lolMiner-0.7a5
- XMrig-2.12

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

greenTea v0.4.4 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Gminer-1.29 (V 1.3 not compatible with NH)
- GrinPro-1.1
- TRex0.9.2

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

NH has updated stratum for grincuckaroo29 , now Bminer report about like this:

"invalid nonce, not compatible with nicehash "

Gminer 1.28 works correctly with new stratum (but it's work only for 8Gb cards or requires win7 for 6Gb cards)

So when developers can upgrade Bminer or maybe someone has a solution at the moment?

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- CryptoDredge-0.16.1 (V 0.16.2 all time crashed at Lyra2REv3 with NH)
- Gminer-1.27

Features:

- One universal version for all CUDA (You must specify in the settings which version to use - 9.1, 9.2 or 10.0)

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

Version 1.26 also does not work with NH

yea, not working with MSI 1060 3Gb Gaming

greenTea v0.4.2 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Bminer-11.4
- CryptoDredge-0.16.0
- Phoenix-4.1c

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

greenTea v0.4.1.1 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Bminer-11.3 (cuda 9.1v no longer supported)
- ClayDual-12.0
- CryptoDredge-0.16.0
- T-Rex-0.9.1

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

greenTea v0.4.1 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Bminer-11.0 (cuda 9.1v no longer supported)
- miniZ-1.0 (new extra miner, improvements: +10-20% for Equihash 144,5)
- T-Rex-0.8.9
- XMrig-2.8.4
- Z-Enemy-1.28

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

Quote from: miniZ on December 22, 2018, 02:07:17 AM

Hi webgkv,

I am not very familiar with power shell, but I think that miniZ does not like your getstat request.

Try instead of:

Code:

$Message = @{id = 1; method = "getstat"} | ConvertTo-Json -Compress

to use:

Code:

$Message = '{"id":"0", "method":"getstat"}'

Now it works great, thanks for the help!

By the way, there is another similar development (on the powershell script). There just used http request, because it seemed to me that getstat does not work there also:

https://github.com/MaynardMiner/SWARM/blob/master/build/powershell/background.ps1

line 361 for miniz and line 400 for ewbf

EWBF api - this is the first option that I tried, but it doesn't work also.

"ewbf" {
$Message = @{id = 1; method = "getstat"} | ConvertTo-Json -Compress
$Request = Invoke-TCPRequest $Server $port $message 5
if ($Request) {
$Data = $Request | ConvertFrom-Json
$HashRate = [double](($Data.result.speed_sps) | Measure-Object -Sum).Sum
}
}

Do you have any idea what could be wrong here?

Also please write me a private message.

Hello!

You made a great miner!

Some time ago, I made this fork https://github.com/webgkv/greenTea

At the same time, I am not a programmer, but rather an advanced user. And for the most part I develop this fork as a hobby.

And so I need your help, that the miniZ would have the opportunity to work with this script. Saw you have done something like this for hiveOS.

In more detail, it’s not a problem to launch a miniZ with a script. The problem is in obtaining data from the miner, since he does not have standard api.

So maybe you can tell me how should look the code for your miner api like this:

"Optiminer" {
$Request = Invoke-HTTPRequest $Server $Port "" 5
if ($Request) {
$Data = $Request | ConvertFrom-Json
$HashRate = [double]($Data.solution_rate.Total."60s" | Measure-Object -Sum).sum
if (-not $HashRate) { $HashRate = [double]($Data.solution_rate.Total."5s" | Measure-Object -Sum).sum }
}
}

This is a piece of code from a file https://github.com/yuzi-co/Forager/blob/master/Include.ps1

Thanks for your help!

greenTea v0.4.0.1 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- CryptoDredge-0.14
- T-Rex-0.8.6

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

greenTea v0.4.0 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- Bminer-10.7 (cuda 9.1v has BM 10.4, the developer does not provide update)
- CryptoDredge-0.13 (cuda 9.1v has CD 0.9.6, the developer does not provide update)
- PhoenixMiner-4.0b
- T-Rex-0.8.3
- Z-Enemy-1.25

Added new algorithms:

- X21S
- Lyra2vc0banHash
- Pipe
- Dedal

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only

greenTea v0.3.9.5 release here!

Change-log:

All Features from previous Editions plus:

Updated and tested Miners (Full tested both win7 cuda 9.1 / win10 cuda 9.2 / win10 cuda 10.0) :

New miners:

- T-Rex-0.8.2
- Z-Enemy-1.25

For win 10 CUDA10 recommended NVIDIA driver 416.+

For win 10 CUDA9.2 recommended NVIDIA driver 398.+

For win 7 CUDA9.1 recommended NVIDIA driver 390.65-391.01 series only