 Show Posts
|
|
Pages: [1]
|
|
@Anyone What's happened with this project? What's happened with Maplechange.com? Is there any chance of getting my coins back which was on Maplechange.com ?
|
|
|
|
Hello Miners, Can you suggest driver version and any settings to test, so I can get the maximum of my rig? Thank you in advance! Below is my setup 5 x GTX 1080 (ASUS ROG A8G) 8pin+6pin / Micron memory [2560-2590 Sol/s] clock/mem: 2025(38)/5103 MHz / TDP 120% / 55-60C / Ambient 22C Win7-64, drivers 375.70, nVidia Inspector 1.3.7.8 EWBF's miner ver 0.2.0b, solver 0 H81 PRO BTC rev.1.01 G1840 @2.8 8GB DDR3 1600 CORSAIR (1x8GB) Corsair HX1200i - Main psu (powers everything + risers + 3 gpus) Corsair RM750x - 2nd psu (powers only 2 gpus) USB RISERS v.005s Anyone with better speeds on any gtx 1080?  |
|
|
|
Great! Thank you! 2x1070, 2x970  |
|
|
|
This is the fastest nvidia zcash miner I've seen so far. Maybe a little bit unstable, but I hope it will be fixed in future releases. More than 500 Sol/s on GTX1080, sometimes 520 depending on room temp and clocks (2000+/5100). I have 5 gpus of these, ASUS A8G with Micron memory. I have 480H/s on Nicehash 1.7.3.12 with their latest equihash miner, but I am achieving it only on benchmark  (Very strange!!!) When mining with 5 gpus, I can achieve only 460-470, sometimes lower, whenever my cards are running at 2000 or 2080 clock speeds. In fact I saw 480 only twice since the version 1.7.3.12 was released. I made many tests with many settings, but when I start to play a lot, the things go even worse. I suppose nicehash devs didn't optimize their miner properly for gtx1080 or there is something in their service, but my other cards are just fine (970, 1070). I can't parse the extra parameters, maybe some bug in latest version. This is driving me crazy and I prefer to mine with this miner on Suprnova pool. That's it. Period! Thank you for your effort and time Dev! |
|
|
|
Version 0.0.2b released. Fix for nicehash support. Bat file for suprnova. Another problems will be fix asap.
At Last...AWESOME WORK! THANK YOU! GTX 1080 - 300+ H/s [2025/5103] 180-190W GTX 1070 - 270+ H/s [2025/4101] 160W GTX 970 - 180+ H/s [1402/3602] 170W Stable so far on nicehash. Good luck! |
|
|
|
What is the switch to enable for pascal.
Because It looks like he takes M=1 flag..for Maxwell.
Output from the miner.
[15:19:21][0x000029f0][info] miner#0 | Initializing thread #0 (CUDA-DJEZO) GeForce GTX 1080 (#0) M=1
[15:19:21][0x00001de4][info] miner#1 | Initializing thread #1 (CUDA-DJEZO) GeForce GTX 1070 (#1) M=1
[15:19:21][0x000031a4][info] miner#2 | Initializing thread #2 (CUDA-DJEZO) GeForce GTX 1080 (#2) M=1
[15:19:21][0x00002694][info] miner#3 | Initializing thread #3 (CUDA-DJEZO) GeForce GTX 1070 (#3) M=1
[15:19:21][0x00002504][info] miner#4 | Initializing thread #4 (CUDA-DJEZO) GeForce GTX 1080 (#4) M=1
Try -h and use different -cm modes. I put -cm 0 0 0 and the gpus take M=1 (1x1080 + 2x1070) - total 560sol/s |
|
|
|
Finally a better miner for nvidia  v1.0.2a results GTX 970 - 140 [1436/3602] GTX 1070 - 200 [2025/4101] GTX 1080 - 150 [2038/5103] |
|
|
|
Nicehash sucks. Don't use it.
I am using Nicehash for a while and I don't have any major problems. What do you suggest as a better alternative? |
|
|
|
I have a rig with 6 x sapphire nitro+ oc rx 480 8gb cards and using a modded bios from eth I am getting:
- 1000h/s for about 910w at the wall
Can we get more h/s from this gpu and less power draw?
I have the exact same cards, 7 of them in 1 rig. 1050H/s 780 Watts at the wall. You need to underclock and undervolt. D8V1D what is your motherboard? |
|
|
|
Hello all
Can any one tell us 290x clock and memory settings to get best zec hash rate
Also I want to know 280x setting
SAP R9 290X TRI-X 8GB (1040/1400/-31mV) - 210.807 H/s (can perform better) MSI R9 390X GAMING 8GB (1100/1500/-31mV) - 240.956 H/s SAP R9 390X NITRO OC 8GB (1100/1500/-31mV) - 240.293 H/s SAP R9 390 NITRO OC 8GB (1100/1500/-31mV) - 227.941 H/s min.925 - max.1120W stock bioses and Auto fans with custom curve via MSI Aferburner 4.3.0 H97 Anvrs, G1840, 8GB RAM, 80GB HDD, 16GB swap, Win7-64, crimson 15.12, Claymore's ZCash AMD GPU Miner v7.0 For stock hawaii DPM4 normally works, add -100mV + mem 1125/ 1250 and you will see some nice power savings. Performance hit is normally 10-15% but that is not a problem with these profitability levels. Antantti thanks for your advise! |
|
|
|
Hello all
Can any one tell us 290x clock and memory settings to get best zec hash rate
Also I want to know 280x setting
SAP R9 290X TRI-X 8GB (1040/1400/-31mV) - 210.807 H/s (can perform better) MSI R9 390X GAMING 8GB (1100/1500/-31mV) - 240.956 H/s SAP R9 390X NITRO OC 8GB (1100/1500/-31mV) - 240.293 H/s SAP R9 390 NITRO OC 8GB (1100/1500/-31mV) - 227.941 H/s min.925 - max.1120W stock bioses and Auto fans with custom curve via MSI Aferburner 4.3.0 H97 Anvrs, G1840, 8GB RAM, 80GB HDD, 16GB swap, Win7-64, crimson 15.12, Claymore's ZCash AMD GPU Miner v7.0 |
|
|
|
Maybe Claymore change his decision not to make Nvidia miner... It would be nice.
I got 1080 and 2x970
The latest version of nicehash (1.7.3.5) makes about 130sol/s with GTX 1070 |
|
|
|
This version 6.0 is more stable than the previous.. like eth miner.. the hashrate don't fluctuate so much.. with the previous version the number go from 120 to 135 H/s (sometimes 140) .. this version the number go from 153 to 155 H/s... very stable.. Great job!!  Yes, the same with my cards 390x/390/290x - 182/175/143 - Bravo na Claymore! |
|
|
|
Yes , but my 100$280х is making 110sol/s and my 450$1070 only 90sol! This is crap!
600EUR 1080 making 60sol/s - Disaster! |
|
|
|
When will You embed this miner to NiceHashMiner?
Yes, it will be included in our next version, released soon (give us a few days for testing). Thanks, that's a good news. |
|
|
|
Thank you Nicehash! Now is much better. Probably this will be ported in the next 1.7.x.x version!? My results: PNY GTX 970 OC XLR8 - ~52 [1367/3506] ASUS ROG GTX 1070 O8G - ~70 [2038/4101] ASUS ROG GTX 1080 A8G - ~60 [2038/5003] I only get 22 on my 970 gtx do you open a separate cmd window for each card? thx No, only one. Here is my Start.bat eqm -cd 0 1 2 -t 0 -l eu -u YOURBITCOINADDRESS -w WORKERNAME i have 3 gpus, so "-cd 0 1 2" |
|
|
|
Thank you Nicehash! Now is much better. Probably this will be ported in the next 1.7.x.x version!? My results: PNY GTX 970 OC XLR8 - ~52 [1367/3506] ASUS ROG GTX 1070 O8G - ~70 [2038/4101] ASUS ROG GTX 1080 A8G - ~60 [2038/5003] |
|
|
|
|
