Show Posts
|
Pages: [1] 2 »
|
That a high memory clock for a bios modded RX 570, the highest mine can go is 2075 MHz, but that may be OK for a card without a Bios mod. Use HWinfo to check for memory errors. Ideally there will be no errors. If there are more than a few memory errors, you should lower the memory clock by 25 MHz until it stops giving errors.
please can tell me Where do I find the HWinfo ?
|
|
|
I have 6x sapphire rx 570 8gb micron memory , I don't do bios mod but only change the core clock and memory clock to be :
core clock = 1280
memory clock : 2170
same thing I have 1x msi rx 570 4gb elpida memory
core clock = 1280 memory clock =2110 ( I try increase to be 2140 but not working and restart my rig )
I do that more 1 month ago and it's work good and give me in eth hash = 26.5 MH per card , someone tell me my afterburner setting is too high and it will be damage your cards , are this is true ?
|
|
|
For mining AMD --gpu-platform 2 Exmpl: sgminer --gpu-platform 2 -k skunkhash -o stratum+tcp://sigt.pool.mn:8732 -u xoma11.xoma13 -p x -I 20 pause if don't work, change --gpu-platform 0-3 I want to add code for temp overheat but not work My code like that : sgminer.exe -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u ***** -p **** -I 20 -temp-overheat 75 pause it's not work for my gpu rx 480
|
|
|
I want to add code for temp overheat but not work
My code like that :
sgminer.exe -k skunkhash -o stratum+tcp://zec.suprnova.cc:7106 -u ***** -p **** --temp-overheat 75 pause
it's not work for my gpu rx 480
are the code is not true ?
|
|
|
I found 7 blocks between 24 hours .. but I'm not solo mining .. I mine with nicehash and I don't know If I can mine solo or change to another pool this will be better ?
|
|
|
I have antminer and I found 2 block . What does that mean ?
I'm mining with nicehash and My profit not increased , why ?
It just means you don't understand how nicehash mining works. It does not matter how many blocks your gear finds. You paid a flat rate based on your hash rate. So If you are ice mother fucking cold or
red mother fucking hot same flat rate.If I found this 2 block with other pools like antpool , How much will I get?
|
|
|
I have antminer and I found 2 block . What does that mean ?
I'm mining with nicehash and My profit not increased , why ?
|
|
|
I have antminer and I found 2 block . What does that mean ?
I'm mining with nicehash and My profit not increased , why ?
|
|
|
I have antminer S9 and the internet was disconnected for 1 hours and work again but I see one hashboard not working (the red led off)
I try do restart many time not work..
I check the board if burned or damaged but its fine and I don't see any damage .
I try connect this hashboard only but not working also .
Now I disconnect this hashboard and the others two board working good.
I've noticed when I connect and power on all hashboard ,the antminer Restart several times but two hashboard work good and the other one not working ( red led off)
how can resolve this problem ?
it is dead send it in for repair. that happens to some boards when the internet dies off. Sorry it happened to you. Thanks for reply I try upgrade or change firmware I use this file to upgrade : https://shop.bitmain.com/files/download/s9-20160715-600M.tar.gzI wait 20 minute after upgrade but nothing happened , I do reboot again and the all 3 hashboard work for 2-3 minutes normally and Hashrate increaset to 12 TH but after that one board stop hashing .. I think problem from firmware or control board because all hashboard can work but one of them stopped , I will try replace control board or try use another firmware , What you think ?
|
|
|
I have antminer S9 and the internet was disconnected for 1 hours and work again but I see one hashboard not working (the red led off)
I try do restart many time not work..
I check the board if burned or damaged but its fine and I don't see any damage .
I try connect this hashboard only but not working also .
Now I disconnect this hashboard and the others two board working good.
I've noticed when I connect and power on all hashboard ,the antminer Restart several times but two hashboard work good and the other one not working ( red led off)
how can resolve this problem ?
|
|
|
Hello,
I'm new here and I want to know ..
Why should open buy orders several time Instead of entering all the amount in just one order ?
Where is written that you should create X Order at the same price than 1 Order with full amount? I mean How I Win from this application? why people open many orders with this application and used it for this purpose ? I mean How I Win from this application ? Using it why people open many orders?...... Becuse people want to trade maybe and people do a lot of things for can wiin money that for sure @Sampey i send you a mp for buy my liscence , thanks for your work! you kiding me I think you know what I want to ask for .. generally I trade in yobit manually without this software and I don't know How I can use C.A.T for make more profit .
|
|
|
Hello,
I'm new here and I want to know ..
Why should open buy orders several time Instead of entering all the amount in just one order ?
Where is written that you should create X Order at the same price than 1 Order with full amount? I mean How I Win from this application? why people open many orders with this application and used it for this purpose ?
|
|
|
Hello,
I'm new here and I want to know ..
Why should open buy orders several time Instead of entering all the amount in just one order ?
|
|
|
If you use AntPool, can be normal as AntPool is currently down. yes I use Antpool ..now How I can know if antpool server work again or still down ?
|
|
|
Now I have same error : Socket connect failed: Connection refused
|
|
|
I have antminer S9 , the BMminer version 1.0.0 ..
I want do this rule : when Temperature greater than or equal 67 C stop miner . I try do it in rules tab and I edit (Device temperature ) , in actions tab I add Miner command (stop miner ) . but nothing happened when Temp exceed 67 C and greater ,the antminer still work .How can do this action ?
Can you try to add another action to the same rule? For example to show a Notification as well. By doing that we can figure out if the rule is triggered or not. Is the Antminer running in Privileged API mode? I do another action (notification) it work good but stop miner not work .. see the picture : http://imgur.com/aMX5ddfI don't know what (Privileged API mode) mean and how can I do that ? If you select an Antminer in the main window of Awesome Miner, and look at the tab Summary at the bottom part of the screen, you should be able to see "API Access", indicating either Privileged or Restricted. Thanks bro .. It work now
|
|
|
Different batch of chips, or different amount of thermal adhesive applied by a different worker in the factory. Could just be the fact that one is closer to a cooler air that's coming from somewhere
I also changed the place for each other and same results
|
|
|
I have 2 S9 antminer .It's work in the same room and the same temperature ,I see a difference in the temperatures of the two devices like that :
the Temp chip for antminer S9 #1= 90 , 93 , 95 , in the same time the Temp chip for antminer S9 #2= 87,82,81
the second one is work with lower temp than the first one why ? , although all of them in same batch and same Specifications.
Thanks
|
|
|
I have antminer S9 , the BMminer version 1.0.0 ..
I want do this rule : when Temperature greater than or equal 67 C stop miner . I try do it in rules tab and I edit (Device temperature ) , in actions tab I add Miner command (stop miner ) . but nothing happened when Temp exceed 67 C and greater ,the antminer still work .How can do this action ?
Can you try to add another action to the same rule? For example to show a Notification as well. By doing that we can figure out if the rule is triggered or not. Is the Antminer running in Privileged API mode? I do another action (notification) it work good but stop miner not work .. see the picture : http://imgur.com/aMX5ddfI don't know what (Privileged API mode) mean and how can I do that ?
|
|
|
|