 Show Posts
|
|
Pages: [1]
|
I see, so I guess I'm f**k whit those 3 miners...  I guess I need to send those to bitmain for repair.. Thanks guys! |
|
|
|
|
Hi,
I did, but I think that causes the issue, so that's why I want the original firmaware without updates...
It's just for testing because I have tried everything so far except this...
Thanks
|
|
|
|
|
Hi all,
thanks for your replies.
Actually I thougt it was the electricity but I discconected everything and just put one S9 to work and it behave the same way.
and other very strange thing it's that all my miners stop working correctly at the same week.... thats very odd
If someone has that version of antminer S9 13.5T without firmware update, can please backup your firmware and share a copy, just to make sure the firmware it's working propertly. Because I did test everything except that..
thanks
|
|
|
|
|
Sorry, all runs with 220 including my L3
|
|
|
|
|
Hi,
thanks for your reply.
Im usign the bitmain official PSU, I bought it together, from Bitmain.com
Also I have 5 PSU all from bitmain, and I did try to change to check if it was the PSU but it's not, because I have L3 miners and they work just fine with the same PSU.
Regards
|
|
|
|
|
Hi guys,
I have 2 antminers S9 13.5T, I updated the firmware of those machines and I noticed they started to fail. Currently they one miner only detect 2 hashing boards but the third HB works, and the other one detect 3 HB but one it's not hashing.
I investigate a lot, I have made a lot of tests and I couldn't find any phisical damage.
I was wondering if someone has that version of Antminer, without firmware update, can you please share a backup of your firmare??? This because I started to think this is a S.O issue not a hardware issue.
Please help!!
Thanks guys.
|
|
|
|
|
Hi Guys,
Getting ready for the ICO.
Which wallet do you recommend for the ICO?
I use Xapo and Jaxx, but I dont know if thats ok?
Thanks
|
|
|
|
|
Hi guys, is there a minimum to enter the ICO?
Regards
|
|
|
|
|
Hi,
First of all, thanks for all your replies, great team!
I've checked all the things you suggest me.
I've my MOBO without case so the fan it's working great, also the CPU its not hot.
I've changed Dash Mining to Ether mining and so far still working without issues, so I'm afraid the issue it's Dashminer 2.1.1, it's warming my GPU's.
Do somebody know how to control the temp on that miner?
Regards & Thanks to all for your responses!
|
|
|
|
|
Hi guys,
I have one RIG with this problem, It's shutting down randomly and I don't know why, I have with air .
It have:
- 4 GPUs Sapphire RX 470 Nitro 8GB
- EVGA 1300
- Asrock z97 Anniversary
- 8GB ram
- Pentium core i3
- Windows 7 ultimate
How can I track the issue?
I'm mining with DASHMINER 2.1.1
Before I was mining Zchash and never have this issue, and also I'm mining dash since 3 months and just stared to shut down like a week ago...
Any help its appreciate
Thanks
|
|
|
|
|
Hi guys,
I don't know what happened to my Antminer S7 but it was mining at 4.7TH/s but suddenly the hashrate changed to 3.7TH/s
I've also notice in my configuration on the miner status, I got
oooo oooo oooo oooo oooo
oooo ooo ooo ooo ooooo
oooo oooo oooo oooo oooo
Something like that, do somebody had this issue ?
Just looking some orientation
Regards
|
|
|
|
Hi guys, I have one question, It's the same if I configure only one Pool in the antminer or should I configure the 3 fields that I have for the pool? If it's needed what is the benefit of doing this? Another thing, if it's recommended which addresses should I put for slush pool, or in all the fields should be the same? Regards  |
|
|
|
|
Do somebody have any design of this, because I want to make one on 3d Printer and find out if it works, I have S7 miner
|
|
|
|
|
Great, thanks everyone.
Today im going to change the BIOS settings, I'll let you know if that works...
About the power, I already fixed, As m1n1ngP4d4w4n comment before, I didn't have enough power for my machine, my technician already fixed the electrical line and now it's working.
|
|
|
|
|
Guys also I'm having other issue, as you saw in my first message I have an EVGA 1300 but when I start my rig with 4 GPUs the power of the whole place go off, I've already tried twice and both times I loose the power of the place.
Do you know something about this?
Regards
|
|
|
|
|
Thanks for your replay lummujaj!!
I have three setting for PCI-E, should I set the three setting with that value?
|
|
|
|
|
Hi, I have my rig like this:
- Asrock Z97 Extreme6
- 5 Sapphire Nitro RX 470
- Intel Core i3 1150
- 4 GB Ram
- 60 SSD
- EVGA 1300
I have four GPUs connected but when I connect the other one the motherboard throws an A2 error, but only with that port, but the port have no issue if I connect the gpu there and remove the other GPUs.
Do you know how to fix this, for me seems to be a problem on BIOS or configuration but Im not sure.
Thanks
|
|
|
|
|
