Show Posts
|
Pages: [1] 2 3 »
|
Are there any updates regarding the DEV process? Deadline is coming really close already.. I guess another 7 months of waiting or is the date of the release still valid (until end of june)?
|
|
|
The miner runs on the phyiscal host directly not in a VM. So everything that is available at the time he can use, which is almost everything. Because the cpu load is always about 2-5%....
|
|
|
no I have something really different. It might be hardware related, that I assigned to many cores to the VM's but still it doesn't make much sense for me that I only have problems when the miner is running.
|
|
|
Does somebody have similare problems:
I'm mining monero with the current redminer 0.5.7. Beside that hyper-v with a few VM's are also running on the same server (they create almost no load on the cpu).
Well as soon as I start the miner, a few minutes later the system is almost not usebale and I see that the task "System interrupt" from Windows coming up all the time in the taskmgr. This is usally not a good sign.
The miner is running on the host system not on a vm. It seems like the miner is using the cpu on a heavy basis even if I don't see it on much cpu load (usally a few % only).
Thanks for every helpful answer. I already tried: --no_cpu_check this didn't help.
best regars
|
|
|
Why not make it open source because you said already that the base is anyway from xmr-stack. Would also avoid bad voices because of viruses. Just my two cents
|
|
|
I have a few Vega 56 Airboost cards (hynix memory) in place. Unfortunately the seems to be weaker than all others. No timinings are working stable currently which I have been able to found. Somebody had the same problems like me and got maybe a little bit further?
|
|
|
Just setup vertcoin with:
1 x rx570 4GB 2 x Vega56 reference 1 x Vega 64 Strix
[2019-02-09 11:35:30] Stats Uptime: 0 days, 00:25:31 [2019-02-09 11:35:30] GPU 0 [49C, fan 22%] lyra2rev3: 42.45Mh/s, avg 42.40Mh/s, pool 49.20Mh/s a:36 r:0 hw:0 [2019-02-09 11:35:30] GPU 1 [56C, fan 72%] lyra2rev3: 85.55Mh/s, avg 85.44Mh/s, pool 85.76Mh/s a:64 r:0 hw:0 [2019-02-09 11:35:30] GPU 2 [50C, fan 70%] lyra2rev3: 99.62Mh/s, avg 99.55Mh/s, pool 80.14Mh/s a:61 r:0 hw:0 [2019-02-09 11:35:30] GPU 3 [55C, fan 72%] lyra2rev3: 85.26Mh/s, avg 85.25Mh/s, pool 69.61Mh/s a:56 r:0 hw:0 [2019-02-09 11:35:30] Total lyra2rev3: 312.9Mh/s, avg 312.6Mh/s, pool 284.7Mh/s a:217 r:0 hw:0
What settings do you have for the VEGA?
|
|
|
Is AMD support for GRIN planned already or will this never be supported?
|
|
|
and where to get that ROM ( I was a early buyer from Eliovp and would be intrested to get that 1000h/s as well)?
|
|
|
Awesome stuff, thanks a lot for that
|
|
|
just be patient with your investment. You are in crypto land everything can change really really quickly :-) I made a bunch of trades where I was at the same loses as you during this incredibale btc really but some of them recovered in days and now I made from a -80% loss a 40% profit in a couple of days. So be patient, and look how much work the I/O puts in this products and you will be rewareded to support it on one day . If you now a typical trading schema, I belive we are in the capitulation phase, that means we are on the last stage before we go up a again, and only the moon is the limit But I'm also wondering how long it will take that other exchanges gonna list IOC as well. This is my biggest concern right now only beeing listed on one exchange PS: Staking is working perfect for me since 4 days now.
|
|
|
Hey there, I found the way to run the wallet finally running stable and staking nice :-) This is what I have done: 1. Save your current wallet! 2. Uninstall the current IOC / DIONS wallet. Maybe you have to cleanup some folders, especial the one where your wallet is. Delete everything in those folders. 3. Download the new wallet. https://github.com/IOCoin/DIONS/releases/tag/dions-html5wallet-Windows-10-1102-setup4. Install it and start it and let it running for around 5minutes. Create a new wallet and don't point directly to your old. (you will replace that later one with your original own wallet). 4. Download the actual newst blockchain: Currently: https://github.com/IOCoin/DIONS/releases/download/DIONS-BLK-1629521/DIONS.Blockchain.Files.1629521-IODT-f2a897893b69b8dab8a6aff2993ee3f72a27545fcd37f0c5cea9364d9829f535.zip5. replace all file with the downloaded blockchain. Checkout the readme! 6. Start the Wallet again and let it totally sync. 7. After you have a fully synced wallet, copy your original wallet file and override it with the once that you have newly created before. Have fun :-) It's running for me stable no since 3 days with staking, I make around 15 IOC a day right now :-) Thanks a lot for your great product. Still some improvments can be done but I guess for the moment you have enought todo with the current situation so I'll post them later on best regards
|
|
|
seems to work now, thank you guys
|
|
|
So, is it figured out approx when DIONS goes live
Very excited, and want to know the date!
now in around 10 days
|
|
|
usaually it takes around 7-10 days to arrive (at least it was like that with the B1 Panda). For me it sound more and more like a scam here.
|
|
|
Planing to support other crypto (like XMR) to your software?
|
|
|
I also have a bunch of there PSU together with the B1 miner. All are running totaly okay since january now.
|
|
|
were are you actually living with this low energy cost?
|
|
|
You images in the first posts do not work
I don't see them as well
|
|
|
|