need/request i guess? i was polite as i could be about it. My Reasons are my own.

i need eth bios's for my rx480 and rx580, the 580 is a msi rx 580 gaming x +

i need them without gpu mem errors in HWINFO64 so they can still play games

both gpus have samsung memory and are 8gb models

i have saved the roms with ATIFLASH

http://colesrepair.voidbits.com/rx480.rom

http://colesrepair.voidbits.com/rx580.rom

i dont care about power consumption, i dont care if their suckin 160+ watts

i want 30-31mhs if it can be obtained in claymores 9.4 or sgminer (nice hash) 5.6.1

stock clocks on the rx580 are 1431/2000 (OC its 1441/2100)

stock clocks on the rx480 are (1291/2000)

i run 1.0v on rx480 mem, and 1.2v on rx580 mem

stock gpu clocks, i can see how far i can push my memory with the new bios's and remain stable

if anyones willing to please help me id appreciate it, i have a bios right now that allows me 30mh/s on the rx580 @ 2060 with mem errors
i have a bios for my rx480 that allows me 28.9 @ 2060 with tens of thousands of mem errors

the above rom links are stock orig bios's (512kb)
willing to give a little eth for tested stable roms (i dont have much eth but i can give 0.0xx)

please and thank you

yeah i had to disable my intel hd graphics 4600.. now it sees all 3 amd gpus..

does this have something to do with my intel hd 4600 onboard cpu gpu?

can or did claymore make a pure decred miner? im having major problems with sgminer and support for it i dont think exists..

is there a way claymore can release a decred miner and just take his eth mining fee programmed in himself into the exe or something? or some kinda flag or option for 9.4 to mine decred only, even with the intel 4600 gpu?

i have an amd rx580, rx480, and rx460, (8gb, 8gb, 4gb)

i need a suprnova or decredpool.org decred miner, bfg miner doesnt work on them, only sgminer and claymore.. does anyone have a solution? or can claymore respond?

unless theres a way to solo mine decred using claymore 9.4 or some other decred amd gpu miner?

its not putting a load on my RX AMD cards via msi after burner its only using a little of the rx580's power

Started sgminer 5.6.1-nicehash-51
using Jansson 2.7
ADL found more devices than opencl!
There is possibly at least one GPU that doesn't support OpenCL
Use the gpu map feature to reliably map OpenCL to ADL
WARNING: Number of OpenCL and ADL devices did not match!
Hardware monitoring may NOT match up with devices!
Probing for an alive pool
dcr.suprnova.cc difficulty changed to 512
Startup GPU initialization... Using settings from pool dcr.suprnova.cc.
Startup Pool No = 0
Initialising kernel decred.cl with nfactor 10, n 1024
Initialising kernel decred.cl with nfactor 10, n 1024deo cards even, they're not running at full speed according to msi after burner

sgminer 5.6.1-nicehash-51 - Started: [2017-06-06 17:29:19] - [0 days 00:00:06]
--------------------------------------------------------------------------------
(5s):358.9K (avg):925.8Kh/s | A:0  R:0  HW:0  WU:0.000/m
ST: 1  SS: 0  NB: 1  LW: 8  GF: 0  RF: 0
Connected to dcr.suprnova.cc (stratum) diff 8.000 as user kd0frg.superme11
Block: 82000000...  Diff:7.27M  Started: [17:29:19]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
GPU 0:  33.0C 3437RPM | 130.8K/925.8Kh/s | R:  0.0% HW:0 WU:0.000/m I: 8
--------------------------------------------------------------------------------
[17:29:13] Started sgminer 5.6.1-nicehash-51
[17:29:13] * using Jansson 2.7
[17:29:15] ADL found more devices than opencl!
[17:29:15] There is possibly at least one GPU that doesn't support OpenCL
[17:29:15] Use the gpu map feature to reliably map OpenCL to ADL
[17:29:15] WARNING: Number of OpenCL and ADL devices did not match!
[17:29:15] Hardware monitoring may NOT match up with devices!
[17:29:15] Probing for an alive pool
[17:29:16] dcr.suprnova.cc difficulty changed to 8
[17:29:18] Startup GPU initialization... Using settings from pool dcr.suprnova.cc.
[17:29:18] Startup Pool No = 0
[17:29:18] Initialising kernel decred.cl with nfactor 10, n 1024

i have 3 gpus, well 4 if you count my intel HD 4600

i have an RX580, an rx480 (both 8gb) and a rx460 (4gb)

it only shows one gpu??, my rx480 is plugged into my monitor, my rx580 is plugged into the 2nd hdmi port of my TV, and my intel card is plugged into my 20" monitor via DVI

i was not getting this error a few days ago, it just popped up??

what do i need to do to fix this?

i have an rx480 by MSI (MSi Armor 4gb OC) and im only getting 19-21MH/s

im using the latest crimson relive 16.12.2 driver

im using stock clocks (1291mhz core, 1750 memory)

does anyone have a bios thats UEFI or information on how to flash this particular one, or what tools are needed to do so, and what needs to be adjusted to gain a higher MH/s?

any and all help is appreciated

im mining 19.4mh/s on eth

and 319 MH/s on sia