Can someone share a link ?

What are you mining ?

The question is what will happend with all the earning during the last night, because they were not paid ?

Also i just see that the last transaction is tx: fed621f29b9b0fe3da72a0ba72ab7ff8f536e8d9886a84cec14d1203a0d3e179 and it does not appear in the xvg explorer. This means that there is one payment witch is consider done by the pool but actually is not. So what will happen with this payment also

Admin almost 7 hours with this problems! It is time to say something. If this continue for another hour or two i will most likely permanently move to another pool!

Yes , now it is running

My balance is not updated in at least 3 hours

zcl Account Information and Recent Credits does not work ... they stay for more then a hour or two without changing but i can see that there are new transactions incoming in transactions menu

i have the same problem

Any updates about seed change from bot for bitsler ?
Thanks

You can reset seeds from web but they did again something with their API and when u try to change the seed it tells you that the access_token param is wrong no matter that I used the same token to make a bets and there it works. Bitsler support told me that this feature works but actually it does not at this stage. There is something wrong and the seed for bitsler cannot be change at this point from bot but only from the site. I will check again tomorrow if Bitsler team decides to fix this, but i have my doubts.

The algo is the same

It is interesting to me what will stop you to change delivery address again once the order is payed from someone else ?

eth past 0.02 btc long time ago...

is it so hard someone to make Video and give a proof ?

set 4G enabled ?

Did you try to disconnect one of the GPUs witch is connected to 850 PSU and to try with 3 GPU on 850 PSU and 2 on 550 PSU. If it continue to restart the problem is in the small PSU

I have the same problem ... it was from the reisers .... just have to find the one witch is making this (in my case they were 2 of them)

1. Dont unplug and plug cards while the system is on
2. Remove some other card and connect the 6th card. Run the miner and if it last no more then 2 hours then the riser of your 6th card is broken.

Guys when im talking in wats , im talking in a wats from the wall for the hole system. So i still need a better suggestions.

Hello guys ... need some help or directions

My configuration:
Motherboard: Asus Prime H270-Plus
GPU: Asus GTX 1070 DUAL 08G x 6
PSU: Gigabyte XP1200M - 1200 w 80 plus platinum
SSD: 128 Gb ADATA
RAM: HyperX Fury 8 gb DDR4
OS: Win 10 Pro

I have installed all the latest drivers + CUDA

All cards are on power risers VER 006C

So far so good, but ... when i try to mine with EWBF or Nicehash miners it does not take too long for the rig to reboot.
I`m using MSI afterburner in order to over/downclock the cards.

I try them one by one and they work very well ... i can get 470+ sols/s per card, but when i put them all together they are starting to crash the configuration. Everything is fine with 4 cards , but when i add 1 more and the reboot repeats. First i taught that the problem is in the PSU, but i try ETH mining with huge overclock and i was near 1000 W and it was running ok. After that i underclock and start zcash mining and until it gets 800 w it is ok ... after that it starts to crash. If i underclock all the cards and set the power limit to 70% for example it works. I think it also worked for 75% of the power limit ... after that it crash. For ETH i set the power limit to 98% for all cards and still no problem.... no crash... so from here i just decide that the PSU is not the problem. Also the cards when tested one by one are not crashing. The temperature of the cards is not more then 70 C ... usually 65 C. The temp of the CPU was under 45C.

I`m really out of ideas. It will be nice if someone can help me with this. If i forgot some information pls ask