Latest posts of: Osr

Show Posts
Pages: [1]

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] MonetaryUnit [MUE] - X11. MasterNodes. Funding. Governance. Services. Devs

on: July 25, 2017, 01:50:47 PM

Hi guys. I was minning last 3 days on https://pool.weminemue.com/ and then i check my wallet : its was 0. But i can see payouts on pool`s wallet page. But i cant find no one of it`s hash transaction at https://chainz.cryptoid.info/mue/ . Is it wrong with pool and i just waste 3 days or it is something else?

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Launched: PiCoin [POS+POW] [SIGNATURE CAMPAIGN=AIRDROP]

on: April 10, 2017, 07:06:12 PM

Quote from: legday on April 10, 2017, 06:43:12 PM I hope Picoin won't be listed at yobit. It would significantly have negative effect on coin price. At least thats what I think. yes, i agree with you. Of cource best choise poloneixe) Buts it a dream right now) Bittrex or cryptopia would be better.

Alternate cryptocurrencies / Pools (Altcoins) / Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█

on: March 15, 2017, 03:54:08 PM

Quote from: crackfoo on March 13, 2017, 04:34:13 PM Quote from: crackfoo on March 07, 2017, 01:52:53 PM Quote from: Osr on March 07, 2017, 01:50:57 PM Quote from: crackfoo on March 05, 2017, 10:52:45 PM I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching? I`ve got 3 Quards and set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted it 3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining. I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine. I think you can PM to @baikal for some advice. great thanks! Can't wait to try them out. if only UPS would stop getting delays Been running the Baikal Giant now steady @918Mh and haven't seen any problems with switching or getting stuck. I havent had any problems for 10 days. Maybe it was problem with my internet/router)

Alternate cryptocurrencies / Pools (Altcoins) / Re: █▓▒░-< [ZPOOL.CA][Hash Rentals][Multipool] The miners multipool >-░▒▓█

on: March 07, 2017, 01:50:57 PM

Quote from: crackfoo on March 05, 2017, 10:52:45 PM I ordered some Baikal Giant's since they can do multi algo, but just wondering if anyone uses them with the profit switching? I`ve got 3 Quards and set it to all (x11,qubit ets). It`s work fine for a two or three days, but suddenly stop mining. Ive rebooted it 3 times and it works fine but just for 2 hours. And again same problem. So i just go to x11 mining. I came back to all algo mining yesterday and its ok now. But we will see in severals days if it works fine. I think you can PM to @baikal for some advice.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World

on: February 08, 2017, 01:09:45 PM

Quote from: albanes on February 08, 2017, 01:04:14 PM when UBQ appear on Bittrex ? 12 PST But still no gui wallet:(

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World

on: February 06, 2017, 08:32:46 PM

Quote from: xocel on February 06, 2017, 08:29:48 PM Quote from: Osr on February 06, 2017, 08:12:06 PM Quote from: Ursul0 on February 06, 2017, 04:49:37 PM Quote from: Osr on February 06, 2017, 12:01:01 PM And somebody forget cant get access to his wallet with 65 UBQ, because of wrong password Have anybody got more stupid situation?) it's possible that your password is not wrong. there's an issue with geth. if you try to run "geth account update" it may accept your password as you type it in, and allow you to change it. after changing it will start working properly. Ty for your reply) Can you say ane details about this "geth account update" ? Where i can get it. Because under password is a file with private key from http://ubiqsmart.com/coinswapaddress/#generate-wallet . I was think password is bad, i have crewated one more wallet with the same password and it work without any problems. If you saved the raw unencrypted private key when creating the swap address, you can import it fine, with no password, and set one when importing. The problem is thsh i didnt(

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World

on: February 06, 2017, 08:12:06 PM

Quote from: Ursul0 on February 06, 2017, 04:49:37 PM Quote from: Osr on February 06, 2017, 12:01:01 PM And somebody forget cant get access to his wallet with 65 UBQ, because of wrong password Have anybody got more stupid situation?) it's possible that your password is not wrong. there's an issue with geth. if you try to run "geth account update" it may accept your password as you type it in, and allow you to change it. after changing it will start working properly. Ty for your reply) Can you say ane details about this "geth account update" ? Where i can get it. Because under password is a file with private key from http://ubiqsmart.com/coinswapaddress/#generate-wallet . I was think password is bad, i have crewated one more wallet with the same password and it work without any problems.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN][UBQ] Ubiq - Smart Contracts For An Automated World

on: February 06, 2017, 12:01:01 PM

And somebody forget cant get access to his wallet with 65 UBQ, because of wrong password Have anybody got more stupid situation?)

Alternate cryptocurrencies / Mining (Altcoins) / Re: ethminer-0.9.41-genoil-1.1

on: January 30, 2017, 08:50:37 PM

Quote from: stoon on January 30, 2017, 08:18:20 PM Quote from: Osr on January 30, 2017, 07:47:05 PM Hi guys! Can you help me? I use this miner woth 4 x gtx 1060 on Windows 10. And when im running this miner ive gott 100% CPU use and PC lagging and reboot after few minutes( But in 3% sometimes it just work fine. bat file : set GPU_FORCE_64BIT_PTR 0 set GPU_MAX_HEAP_SIZE 100 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 color 02 ethminer.exe -U -SP 1 -S ubiqpool.io:8008 -O 0xaA939Ed2084F1727de31Dee869e58eeFd79c9335.max1:x --cl-local-work 128 --cl-global-work 16384 Try this: setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 i try with this and it dodnt works( May be its too low CPU and Team weaver. Its finaly works after 40 tries. It was 100 % jCPU for 1-2 minute and became normal.

Alternate cryptocurrencies / Mining (Altcoins) / Re: ethminer-0.9.41-genoil-1.1

on: January 30, 2017, 07:47:05 PM

Hi guys! Can you help me? I use this miner woth 4 x gtx 1060 on Windows 10. And when im running this miner ive gott 100% CPU use and PC lagging and reboot after few minutes( But in 3% sometimes it just work fine. bat file : set GPU_FORCE_64BIT_PTR 0 set GPU_MAX_HEAP_SIZE 100 set GPU_MAX_ALLOC_PERCENT 100 set GPU_SINGLE_ALLOC_PERCENT 100 color 02 ethminer.exe -U -SP 1 -S ubiqpool.io:8008 -O 0xaA939Ed2084F1727de31Dee869e58eeFd79c9335.max1:x --cl-local-work 128 --cl-global-work 16384

Local / Альтернативные криптовалюты / Re: [ANN][UBQ] Ubiq - Умныe Кoнтpaкты для Aвтoмaтизиpовaннoгo Миpa

on: January 29, 2017, 07:08:47 PM

Quote from: cryptomaxsun on January 29, 2017, 06:51:59 PM Quote from: Osr on January 29, 2017, 06:45:41 PM Здравствуйте, подскажите пожалуйста, что не так. Пробовал запускать ethminer-0.9.41-genoil-1.1.9 с такими параметрами GTX 1060 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 color 02 ethminer.exe -G -SP 1 -S ubiqpool.io:8008 -O wallet 0xaA939Ed2084F1727de31Dee869e58eeFd79c9335.max1 --cl-local-work 128 --cl-global-work 16384 В результате показывает одни 0+0+0+0 и грузит процессор, вместо видеокарт и через 2 минуты перезагружается компьютер. Конфигурация Mining: -G,--opencl Когда копаем на GPU с помощью OpenCL. AMD. -U,--cuda Когда копаем на GPU с помощью CUDA. NVIDIA -X,--cuda-opencl Использование OpenCL + CUDA когда в системе понатыкано что попало. Может потребоваться установка --opencl-platform 1 -С --запустится майнинг на процессоре в некоторых случаях если майнер пишет что "No GPU device" помогает добавление параметра: --opencl-platform 1 И из батника уберите слово wallet . вот описание команд генойла - http://bittogether.com/index.php?topic=353.0 Большое спасибо! "wallet" случайно затесался, майнер с ним не запускался. Правильная буква помогла под зеленых) Так что еще раз спасибо, в том числе и за ссылку.

Local / Альтернативные криптовалюты / Re: [ANN][UBQ] Ubiq - Умныe Кoнтpaкты для Aвтoмaтизиpовaннoгo Миpa

on: January 29, 2017, 06:45:41 PM

Здравствуйте, подскажите пожалуйста, что не так. Пробовал запускать ethminer-0.9.41-genoil-1.1.9 с такими параметрами GTX 1060 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 color 02 ethminer.exe -G -SP 1 -S ubiqpool.io:8008 -O wallet 0xaA939Ed2084F1727de31Dee869e58eeFd79c9335.max1 --cl-local-work 128 --cl-global-work 16384 В результате показывает одни 0+0+0+0 и грузит процессор, вместо видеокарт и через 2 минуты перезагружается компьютер.

Pages: [1]