 Show Posts
|
|
Pages: [1] 2 »
|
Not flacking for BM, but not really rigorous enough:
a) As we all know, GPU and ASIC miners heat up a room, warm up any stands they are on. So anything in the room warms up.
b) In the video, some if not all miners are sitting on cardboard boxes. You would need to eliminate the cardboard boxes (i believe glue is used in their construction), any manufactured wood product (plywood, cheap shelving) that uses some sort of glue as a binder. Any cheap packs or bags that are made out of polyester. Any construction materials used in building the room.
(Wasn't there an issue with imported drywall a few years back?)
Bottom line, I would expect there are other material candidates in the room that outgas formaldehyde when warmed up.
The possible A3 components would be the heat sink sticky tape and maybe the electrolytic capacitors(they have a small port for possible venting).
I forget, also the packing foam used in shipping the miners would be suspect.
True, the miners must be increasing the ambient temperature in the room and as a result increasing the rate at which formaldehyde is being emitted by the ]most likely newly installed}wood products |
|
|
|
|
It`s a lie, formaldehyde has a boiling point of -19 degrees celcius, even if the antminer A3 was dipped in formaldehyde and shipped in an unsealed package to you all the formaldehyde would have evaporated by the time it arrived on your doorstep.
|
|
|
|
|
I deposited 11.8 KRB into my cryptopia account but it still shows that I have a zero balance after 21 confirmations. Below are the details of the transaction. Please help.
Date: 23.11.17 04:33
To: Ka96n4BKPF6Hi1fptzLr2uXvXaZRunoEzYnsmfgbT7A6eKkubdpBJCxARqjC3QVpZEJ9AANwWCnHr1u vmcYcdwtG81qg7DD
Amount: -11.80 KRB
Fee: 0.0001 KRB
Payment ID: D4B276F3C805D0346D2404F06453711BCE2ABCDFB3448E899CC204CD29E68E7E
Transaction hash: DCC03DB767FC50042769507408A204B0BFF610CCD5824D821955C6E0942A3EB7
I sent a ticket on cryptopia, but nobody has responded.
|
|
|
|
|
If you live in a dusty area the gpu fans break the dust particles into fine particles which fill the air in the room. Breathing this air for an extended period of time might lead to health problems later due to the inability of the respiratory system filtering the fine dust particles.
|
|
|
|
|
install windows 10 and do not activate, you will not receive any updates. Before the registration period expires use regeddit to disable windows 10 updates and windows defender
|
|
|
|
|
I believe when it comes to such long periods of time (3+ years) the quality of the fans on the GPU is more important, than whether it is 8GB or 6GB.
|
|
|
|
|
Some motherboards make it easier to set up and troubleshoot mining rigs due to their features.
|
|
|
|
Has anyone gotten the Afterburner 4.4.4 beta version to work with the blockchain driver? I find that wattman to be a pain when tweaking OC settings because crashes always reset all the settings for each and all GPUs. Any advise will be appreciated.
I have installed Afterburner 4.4 beta 16 with the blockchain driver and my rig is still stable after 48 hrs. Do not alter the wattman mclock and cclock settings, only use Afterburner to find the stable mclock and cclock settings for each GPU. I also re-installed windows 10 and disabled windows updates and windows defender. |
|
|
|
|
ETH mining with 180 mh/s at the current difficulty, in a pool you`ll get around 1.5 ETH/month and with the increase in difficulty in another 2 months, you will probably be getting 1 ETH /month.
|
|
|
|
|
Some of the major exchanges will suspend bitcoin buying/selling from around 28th July, what effect will this have on the prize of the major altcoins? I was thinking this might lead to a prize increase of altcoins since during this period most crypto traders may prefer to buy/sell altcoins.
|
|
|
|
|
This problem is usually caused by using an older version of windows 10. Download and install windows 10 creators update.
|
|
|
|
|
Enable 4g decoding in bios, it will work
|
|
|
|
|
I am not sure but maybe the MyEtherwallet scam has led to some people dumping their ether out of fear, that caused the drop in ether, and this together with the anticipated coin split may have had a negative impact on the other coins
|
|
|
|
I`ve just recieved the email below from pandaminer, the new pandaminer B5 will be having rx 460 GPU`s instead of the rx 480 GPU`s, this means that each will be having a total ethereum hashrate of around 90mh/s. I also believe that the RX 460 hashrate is also affected by the increase in epoch. It seems that pandaminer is moving from bad to worse, this is a very bad business idea. Dear friends! 亲爱的矿工们： The pre-sale of the updated PandaMiner B5 Plus will be released at 18:00 pm 7th July (UTC+8), with a total of 1000 units supplied. The new Gen uses RX460 GPU, and the price is 1765USD. Visit www.pandaminer.com for more details. Thanks so much for your long time support of PandaMiner. 新一代熊猫矿机B5 Plus将于7月7日18:00开放预售，本次预售共1000台。新一代矿机使用RX460显卡，价格为￥12000。更多详情请查看官网： www.pandaminer.com。 感谢您长期以来对熊猫矿机的支持！ |
|
|
|
No you cannot rely on the calculators, they do not take into account other factors that affect mining. For example according to https://www.cryptocompare.com/mining/calculator/eth?HashingPower=300&HashingUnit=MH%2Fs&PowerConsumption=140&CostPerkWh=0, my two ethereum rigs with a total hashrate of 310mh/s should be making 1,100 USD/month, but in reality they are currently making around 950 USD /month. The calculators can only give you a rough estimate that will be close to the real results of around one week, the one month estimate obtained from the mining calculators are quite erroneous. Altcoin mining earnings have been decreasing rapidly over the past few weeks due to the rise in difficulty and drop in the prices of most altcoins. |
|
|
|
|
The PSU is turning itself off due to a problem in its power supply or in its output. Check if the rating of your psu is enough to power your rig.
If it is an EVGA psu remove all the VGA, CPU and SATA cables from the PSU and attach the EVGA tester to the motherboard cable. If the PSU fan spins reconnect the cables to the motherboard, GPU`S and CPU. I`ve had similar problems in the past doing this normally solves the problem. It is also advisable to have a surge protector before your PSU.
|
|
|
|
|
