Latest posts of: Cezarr

Show Posts
Pages: [1]

on: October 17, 2018, 09:17:16 PM

Quote from: P00P135 on October 17, 2018, 08:22:55 PM Set a specific config for the problematic GPU with overdriventool. https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/ The thing is I have on every card same settings: Quote Fan_Min=300 Fan_Max=2000 Fan_Target=75 Fan_Acoustic=1340 Power_Temp=85

on: October 17, 2018, 07:30:13 PM

How to reduce single RPM? I have 6 cards, all near 60 degrees, but fans one of them have much more RPM than anothers.

on: September 14, 2018, 03:54:27 PM

Quote from: zawawa on September 14, 2018, 11:37:38 AM I need to see the "message about OpenCL." You might have to install Windows 10 April Update for the AMD driver. Failed to initialize OpenCL drivers. Please install apropriate device driver(s) for your graphics cards. And then my web browser opens https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Adrenalin-Edition-18.5.1-Release-Notes.aspx

on: September 13, 2018, 04:06:31 PM

I have installed AMD drivers which GGS requires, but I always get the same message about OpenCL and being redirected to AMD Adrenalin drivers webstie (which I have installed). Why? PS I have no Windows 10 April Update installed.

on: May 25, 2018, 11:19:55 PM

One of my card (random one) goes SICK and then DEAD, even if I don't OC any of them... Any idea? using sgminer -k x16s -o stratum+tcp://rushhourmining.com:3665 -u RVuwFCFN2t3k2CrqRMjn76cvacT3XZ28tU -p c=REEF -w 64 -X 192 Tried -X 128, -X 192, -X 256 and always one of cards goes SICK and then DEAD...

on: February 22, 2018, 08:31:29 AM

Quote from: zawawa on February 21, 2018, 07:52:57 AM It is more accurate to say that the cards cannot keep up with GGS's NeoScrypt kernel. I would increase the power limit and undervolt the core. There should be no need to lower the intensity. Can't go lower undervolt. My cards have ETH BIOS inside.

on: February 20, 2018, 10:02:16 AM

Have anyone of you had a problem with randomly 0% usage GPU after few minutes? I have 6x 570 and after few mins one of them is not being used, few minutes later another one is added to unused list... Using NeoScrypt.

on: February 06, 2018, 02:01:10 PM

Quote from: UnclWish on February 06, 2018, 01:45:06 PM What algo? Ethash

on: February 06, 2018, 11:47:26 AM

Did anyone notice GPU's squeaking coils? On any settings I can hear them very loud (I don't hear them on claymore miner). 6x RX 570 4GB.

on: January 05, 2018, 11:18:22 AM

Can someone explain this? It's 5th of January and I have the latest version of wallet :/

on: December 29, 2017, 12:57:36 PM

PoS doesn't work?

on: December 29, 2017, 12:28:00 PM

I'm going to use Gateless Gate for TrezarCoin PoW Mining and I have a question about my config file: Quote { "algorithm": "neoscrypt", "intensity": "18", "worksize": "256", "gpu-threads": "1", "load-balance": true, "auto-fan": true, "temp-cutoff": "90", "temp-overheat": "85", "temp-target": "75", "pools": [ { "name": "MAIN", "user": "Cezar.ZET450", "pass": "worker450", "quota": "98;stratum+tcp://pool.trezarcoin.com:5566" }, { "__comment": "Please keep this entry. Otherwise, I won't be able to continue open-source development. - zawawa", "name":"DEVFEE", "user": "DFZHxkoKxiEwpEb8nJZ2ALWHDtsm1thKHU", "pass": "c=dsr", "quota": "2;stratum+tcp://pool.unimining.net:4234" } ] } I have 5x RX 570 and gonna use Mining Farms and High-end Graphics Cards Mining Pool: static difficulty 512 So do I have to change in config "worksize" to 512 or leave it as it is 256?

on: October 17, 2017, 05:39:22 PM

Hmm, Kaspersky Internet Security found Trojan.Win32.IRCbot.awli in startcoin-qt...

on: April 11, 2017, 04:49:51 PM

I have a problem on CentOS 7.3 with Nexus Wallet. I've tried two times and after one minute of loading it always says something about stylesheet, anyone can help me?

Pages: [1]