Show Posts
|
Pages: [1] 2 »
|
AmsterdamCoin Core version v4.1.0.0-9e92d09 (64-bit) My wallet version is this, I sent 500 to coinexchange as a test yesterday I did not receive it Where is the corresponding exchange in this version? Where is the corresponding exchange in this version? see message from dev about problems https://bitcointalk.org/index.php?topic=1152947.msg25032154#msg25032154: There seems to be a problem with the blockchain. We have several chain splits. I am investigating the issue at the moment. It can take some time because I also want to include the new features like zerocoin. If I take the latest PIVX it will give us a newer core with new features. No swap is required. Then its going to be a hell of a job again to update Yobit.
|
|
|
Withdrawals on Yobit are fine, no problems with that.
My withdrawal at yobit stuck with "Transfer from cold storage" status more than 3 days and no answer from support. I withdraw exact 100k AMS for masternode. For withdrawal in small amounts still safe it seems or i have bad luck in AMS I just withdraw a couple 100K from Yobit so it seems that you fell between shore and ship :-) Hopefully Yobit will solve it soon enough with the update to v4! Did yobit do the swap already? Or did you withdraw onto the old chain? Yobit says that the wallet is online, and several people have reported it working now. was hoping on avoiding firing up the old chain, but might as well do it i guess. info about swap on 1st page: Swap your AmsterdamCoin (AMS) https://swap.amsterdamcoin.com
1. Enter your new* AmsterdamCoin address 2. Send your old* coins to the given address 3. Receive the exact amount of new AmsterdamCoin after 6 confirmations
We are proud to present our unique automatic swap procedure. Swap your AmsterdamCoin (AMS) now and be the first to setup a new masternode!
(* new wallet is version 4.0.0.0 and the old wallet is version 3.1.0.0) I senе from yobit to this service and received AMS to my wallet v4 (8/10/2017).
|
|
|
New wallet 4.0 is great. It works well, sync quickly, the masternodes work great. DEV thank you very much! The MuntiSend feature looks good. Is Staking active?
masternodes do get paid (also sort of staking). POS is not yet activated. See the topic start at which block that kicks in Now - block 8117 (http://www.amsterdamblockchain.info/) PoW: ends on block 259200 / 180 days PoS: starting from block 259201
PoW Rewards Breakdown: [block’s 2-43200] 20% MN (1.5 AMS) / 80% MINER (6 AMS) [block’s 43201-151200] 20% MN (1.5 AMS) / 70% MINER (5.25 AMS) / 10% budget system (0.75 AMS) [block’s 151201-259200] 45% MN (2.25 AMS) / 45% MINER (2.25 AMS) / 10% budget system ( 0.5 AMS)
PoS Rewards Breakdown: PoS Phase 1: [blocks 259201-302399] 4.75 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 2: [blocks 302400-345599] 4.5 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 3: [blocks 345600-388799] 4.25 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 4: [blocks 388800-431999] 4 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 5: [blocks 432000-475199] 3.75 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 6: [blocks 475200-518399] 3.5 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 7: [blocks 518400-561599] 3.25 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 8: [blocks 561600-604799] 3 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase 9: [blocks 604800-647999] 2.25 AMS (90% distributed to staker and masternode - 10% budget system) PoS Phase X: [blocks 648000-Infinite] 2 AMS (90% distributed to staker and masternode - 10% budget system) MN - masternode?
|
|
|
Sent email for swapping also. Waiting...
I am waiting for 3 days after I sent CXT and there is no XCXT... Date: 8/8/2017 14:38 To: swap CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -5600.00 CXT Transaction fee: -0.00001 CXT Net amount: -5600.00001 CXT Transaction ID: f70e2c1a20fcc76796a72857a21d0364e5305366028254a19d25a8361c7e2dc0
My XCXT wallet address: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfvDev when you send XCXT? No reply for e-mails after I sent CXT. Date: 8/10/2017 12:23 To: Igor Lessio - Crypto CahNMYy4ignm5r7TfDJRhbp4iuAk4Miyeh Debit: -5599.97 XCXT Transaction fee: -0.000001 XCXT Net amount: -5599.970001 XCXT Transaction ID: 2a3f06a12764a423687a4aa3f030c5a73cc173aef52a0770b3282fea09d02c84-000 Thanks! Date: 8/13/2017 03:45 To: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfv Debit: -5600.00 XCXT Transaction fee: -0.000001 XCXT Net amount: -5600.000001 XCXT Transaction ID: 8f48220687d65088453d12af65091c9f22559e6630d6d2d7379faeecced0a5ad-000
|
|
|
Hi dev..
I sent you 10000 CXT to your provided cxt address CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj in my mail. I sent it from my CXT address CNNugVTGEM1DNpWjKLuHVqxV7DLemk2XbU
The transaction details are as following:
Status: 46 confirmations, broadcast through 4 nodes Date: 8/8/2017 16:08 To: coinonat foundation CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -10000.00 CXT Transaction fee: -0.00001 CXT Net amount: -10000.00001 CXT Transaction ID: 6102cfe934b72df3857ffce5a50b6386b336dd6659f5a602b4f29afef754049d
I sent this details on coinonat.org contact and received your mail containing the windows wallet link.
I installed it. The wallet is online and in sync with network.
So my XCXT address is CGWx6js5LfS6SVDZZWswwpUBL72hvjHjbM
I mailed you the address but you said you aint received any coin.
It is showing 46 confirmations in "Transactions" tab of new coinonat wallet.
The transaction id can be decoded and checked in "block explorer" tab of the new coinonat wallet for check.
kindly check and send the coins.
I have the same problem Date: 8/8/2017 14:38 To: swap CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -5600.00 CXT Transaction fee: -0.00001 CXT Net amount: -5600.00001 CXT Transaction ID: f70e2c1a20fcc76796a72857a21d0364e5305366028254a19d25a8361c7e2dc0
My XCXT wallet address: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfvDev when you send XCXT? No reply for e-mails after I sent CXT.Thanks! Date: 8/13/2017 03:45 To: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfv Debit: -5600.00 XCXT Transaction fee: -0.000001 XCXT Net amount: -5600.000001 XCXT Transaction ID: 8f48220687d65088453d12af65091c9f22559e6630d6d2d7379faeecced0a5ad-000
|
|
|
Sent email for swapping also. Waiting...
I am waiting for 3 days after I sent CXT and there is no XCXT... Date: 8/8/2017 14:38 To: swap CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -5600.00 CXT Transaction fee: -0.00001 CXT Net amount: -5600.00001 CXT Transaction ID: f70e2c1a20fcc76796a72857a21d0364e5305366028254a19d25a8361c7e2dc0
My XCXT wallet address: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfvDev when you send XCXT? No reply for e-mails after I sent CXT.
|
|
|
Hi dev..
I sent you 10000 CXT to your provided cxt address CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj in my mail. I sent it from my CXT address CNNugVTGEM1DNpWjKLuHVqxV7DLemk2XbU
The transaction details are as following:
Status: 46 confirmations, broadcast through 4 nodes Date: 8/8/2017 16:08 To: coinonat foundation CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -10000.00 CXT Transaction fee: -0.00001 CXT Net amount: -10000.00001 CXT Transaction ID: 6102cfe934b72df3857ffce5a50b6386b336dd6659f5a602b4f29afef754049d
I sent this details on coinonat.org contact and received your mail containing the windows wallet link.
I installed it. The wallet is online and in sync with network.
So my XCXT address is CGWx6js5LfS6SVDZZWswwpUBL72hvjHjbM
I mailed you the address but you said you aint received any coin.
It is showing 46 confirmations in "Transactions" tab of new coinonat wallet.
The transaction id can be decoded and checked in "block explorer" tab of the new coinonat wallet for check.
kindly check and send the coins.
I have the same problem Date: 8/8/2017 14:38 To: swap CHoffuDd8TxPH4BRszjdPrpvwt2jLGXkAj Debit: -5600.00 CXT Transaction fee: -0.00001 CXT Net amount: -5600.00001 CXT Transaction ID: f70e2c1a20fcc76796a72857a21d0364e5305366028254a19d25a8361c7e2dc0
My XCXT wallet address: CZrma7EQdQDErJi6cQvFsk1rNNrVBKrqfvDev when you send XCXT? No reply for e-mails after I sent CXT.
|
|
|
Sent email for swapping also. Waiting...
I am waiting for 3 days after I sent CXT and there is no XCXT...
|
|
|
I setup masternode, it worked fine. Then i restarted my wallet and now i get this message when i want to start my masternode: Could not allocate vin for collateralAddress
what does that mean? anyone has an idea of what's wrong?
Try to unlock your wallet first, then start masternode in wallet's masternode control You sent exactly 5000 coins to create a masternode? You have open ports? Send me PM a file debug.log and I'll find the problem. For other coin I used this - https://steemit.com/chaincoin/@magician8/chaincoin-could-not-allocate-vin-error-message-and-solution
|
|
|
check port - http://ping.eu/port-chk/82.74.169.249:50020 port is closedyou have to open port on your PC or router for example other MN - 75.130.162.248:50020 port is open
|
|
|
~~~SNIP ~~~ Put settings in masternode.conf - https://bitcointalk.org/index.php?topic=1152947.msg20755699#msg20755699and restart wallet send only 100k in debug window (see my example) that's my transaction: Status: 517 confirmations Date: 8/10/2017 11:28 Total debit: -100 000.00000000 AMS Total credit: 100 000.00000000 AMS Transaction fee: -0.00002260 AMS Net amount: -0.00002260 AMS Transaction ID: 3333333333333333333333333333333333333333333333333333333333333333 Output index: 0 yes i did it , i have my own masternode running thx ok, and now ?? i see , it says at my mastenode tab active : 00m:00s , and cant refresh the tab , did it start cause status says its enabled how can i see if i did right ?? i mean how can i check it ?? 1) Masternodes tab - "active and status" columns 2) Debug console: masternodemasternode "command"... ( "passphrase" ) Set of commands to execute masternode related actions
Arguments: 1. "command" (string or set of strings, required) The command to execute 2. "passphrase" (string, optional) The wallet passphrase
Available commands: count - Print number of all known masternodes (optional: 'obf', 'enabled', 'all', 'qualify') current - Print info on current masternode winner debug - Print masternode status genkey - Generate new masternodeprivkey enforce - Enforce masternode payments outputs - Print masternode compatible outputs start - Start masternode configured in amsterdamcoin.conf start-alias - Start single masternode by assigned alias configured in masternode.conf start-<mode> - Start masternodes configured in masternode.conf (<mode>: 'all', 'missing', 'disabled') status - Print masternode status information list - Print list of all known masternodes (see masternodelist for more info) list-conf - Print masternode.conf in JSON format winners - Print list of masternode winners (code -1)  masternode debug
Masternode successfully started masternode status
{ "vin" : "CTxIn(COutPoint(---, 0), scriptSig=)", "service" : "---:50020", "pubkey" : "---", "status" : "Masternode successfully started" }  masternode list-conf{ "masternode" : { "alias" : "mn1", "address" : "---:50020", "privateKey" : "---", "txHash" : "---", "outputIndex" : "0", "status" : "ENABLED" } }
|
|
|
need help trying to setup an masternode but i cant manage it Masternode activation: 1. Create a new address -> Receive -> New Address 2. Send exactly 100000 AMS to your new address and write down the TX hash 3. Wait for 25 confirmations 4. Open Help -> Debug window -> Tab console 5. Type "masternode outputs" and write down the output 6. Type "masternode genkey" and write down the output 7. Menu Masternodes -> Button Create 8. Alias: Name of the masternode (can be anything) 9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org) 10. PrivKey: The output of the "masternode genkey" command (step 6) 11. TxHash: The left hand side of the output of "masternode outputs" (step 5) 12. Output Index: The right hand side of the output of "masternode outputs" (step 5) 1: done 2: done 3: done 4. Open Help -> Debug window -> Tab console ?? there is no debug window in help.... so i used the debug window in Tools tab 5: done 6: done 7. Menu Masternodes -> Button Create no create button on MenuMastenode and i stuck 4. Yes, Tools / Debug Window 7. Go to Settings / Options / Wallet and select Show Masternodes Tab it was showened... but i dont see the BUTTON CREATE ... btw i send 100000.00005220 ( -0.00005220 for the fee ) or do i have sent 100000 incl the fee ?? Put settings in masternode.conf - https://bitcointalk.org/index.php?topic=1152947.msg20755699#msg20755699and restart wallet send only 100k in debug window (see my example) that's my transaction: Status: 517 confirmations Date: 8/10/2017 11:28 Total debit: -100 000.00000000 AMS Total credit: 100 000.00000000 AMS Transaction fee: -0.00002260 AMS Net amount: -0.00002260 AMS Transaction ID: 3333333333333333333333333333333333333333333333333333333333333333 Output index: 0
|
|
|
Masternode activation: 1. Create a new address -> Receive -> New Address 2. Send exactly 100000 AMS to your new address and write down the TX hash 3. Wait for 25 confirmations 4. Open Help -> Debug window -> Tab console 5. Type "masternode outputs" and write down the output 6. Type "masternode genkey" and write down the output 7. Menu Masternodes -> Button Create 8. Alias: Name of the masternode (can be anything) 9. Address: Public ip address and port, use for example "123.456.789.123:61510" (You can find your IP address here: http://checkip.dyndns.org) 10. PrivKey: The output of the "masternode genkey" command (step 6) 11. TxHash: The left hand side of the output of "masternode outputs" (step 5) 12. Output Index: The right hand side of the output of "masternode outputs" (step 5) masternode outputs example: { "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" : "0" } The left hand side is the TxHash "159eea4303125de0a60fbce8d362778cfe915166d42de1339d9bc79523d9e9a8" and the right hand side is 0 (zero) Make sure port 61510 is forwarded to your computer (by NAT translation) and that you firewall (like Windows Firewall) accepts connection on this port. For example: type: masternode genkey11:27:58 111111111111111111111111111111111111111111111111111 type: getaccountaddress node11:28:08 2222222222222222222222222222222222 type: sendtoaddress 2222222222222222222222222222222222 10000011:28:32 3333333333333333333333333333333333333333333333333333333333333333 type: masternode outputs11:29:16 { "3333333333333333333333333333333333333333333333333333333333333333" : "0" } amsterdamcoin.confrpcuser=CHANGE_USER rpcpassword=CHANGE_PASSWORD rpcallowip=127.0.0.1 # -------------------- listen=1 server=1 daemon=1 #maxconnections=24 # -------------------- masternode=1 masternodeprivkey=111111111111111111111111111111111111111111111111111 externalip=11.22.33.44
masternode.conf mn1 11.22.33.44:50020 111111111111111111111111111111111111111111111111111 3333333333333333333333333333333333333333333333333333333333333333 0
|
|
|
Hello! What about "Create a Yobit swap request"? Because now I can't withdraw AMS from yobit to new wallet.
Swap request is just done. Thanks for information.
|
|
|
Hello! What about "Create a Yobit swap request"? Because now I can't withdraw AMS from yobit to new wallet.
|
|
|
Hello! OS - Windows 10 Ent 2016 LTSB 64-bit Than I run das-qt.exe it consumes about 60 MB of memory, after several hours it crashed (2 times during 3 days - 2 masternodes (2 PC)). Error - "Microsoft Visual C++ Runtime Library". 1st node has Microsoft Visual C++ 2010, 2nd - Microsoft Visual C++ 2013. Nodes crashed both in one time (it consumes about 750 MB of memory after 24 hours after run). I think it was memory leak. Any ideas?
|
|
|
Thanks, it works after I inserted nodes to config file.
my wallet it not sync. how i can insert nodes to config file ? in file coinonat.conf add addnode=138.197.159.60:44678 addnode=192.3.196.202:44678 addnode=88.99.191.218:44678 please can clarify step by step In windows edit this file "C:\Users\ YOURUSER\AppData\Roaming\coinonat\coinonat.conf"
|
|
|
|