Thank you evakka for the reply! Finally someone is willing to engage in the solution! I am grateful for your troubleshoot at the solution but, I have already sequenced all GPUS through all risers and in turn through all 1x, 16x & mini PCIe slots. They all work perfectly solo, as one would expect. The issue I believe is that my mini PCIe shares the same lane with my PCIe 1x lane 3. Any ideas on that? The only other thread I could find on this was from 2013-2014 here:https://bitcointalk.org/index.php?topic=391411.0 I truly believe this can and should work but I am overlooking a piece of the puzzle here!?!?!

****BUMP****

I still have the same issue. Anyone?!?!?

Surely someone here has to have some advice!?!

So here is my current set up:
Windows 10 64bit
AsRock Z97 Extreme6
Intel Celeron G1840 2.8GHZ
6x XFX Radeon RX 480 8GB (however I can only get 5 to work at this time)
Kingston 120GB SSD
Hyperx Fury 8GB DDR3
HP 1200W PSU dedicated for GPUs
Evga 1000W PSU dedicated to mobo,etc.

Has anybody successfully gotten all 6 GPUs to be recognized? I have all 5 PCIe slots working flawlessly. My issue is with the mini PCIe slot that I have a Mini PCIe to PCIe 1x adapter to 16x USB 3.0 riser. During the build and testing, this setup(Mini PCIe) worked fine and produced video through HDMI so I KNOW it works. Do I have a power problem or is this a Windows 10 issue? Any help or advice would be much appreciated. Thanks for your time and suggestions in advance!

WOW...thanks SO much jackbox...I knew it had to be something so simple! That worked and shares are already being found!

Hey guys, I am new to Ether mining and the cryptocurrency community but am looking forward to the experience! I just got my rig built and am trying to get connected to Nanopool to start mining. I have read and read and then read some more before getting into this. I have followed the instructions to the best of my knowledge but can't seem to get Claymore to operate properly. Below is the most recent log from trying to run Claymore along with my current setup below that. What am I missing and what do I need to fix to get this best running? I am sure it is something so simple and I have just over analyzed my issue. Any help is much appreciated and thank you in advance for your knowledge and insight!


12:53:31:314   1908   args: -epool eth-us-east1.nanopool.org:9999 -ewal b3995a07324ye6b0c8z61937fc36d430adcc6fa1 -epsw x -eworker -allpools 1
12:53:31:318   1908   
12:53:31:322   1908   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:53:31:329   1908   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0      º
12:53:31:333   1908   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
12:53:31:337   1908   
12:53:31:543   1908   This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:549   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:553   1908   Please read "Readme" file for details
12:53:31:558   1908   This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:563   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:568   1908   Please read "Readme" file for details
12:53:31:572   1908   Pool eth-us-east1.nanopool.org removed from the list
12:53:31:578   1908   This pool (eth-eu1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:583   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:588   1908   Please read "Readme" file for details
12:53:31:594   1908   This pool (eth-eu1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:601   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:606   1908   Please read "Readme" file for details
12:53:31:612   1908   Pool eth-eu1.nanopool.org removed from the list
12:53:31:617   1908   This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:626   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:632   1908   Please read "Readme" file for details
12:53:31:638   1908   This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:646   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:654   1908   Please read "Readme" file for details
12:53:31:660   1908   Pool eth-eu2.nanopool.org removed from the list
12:53:31:667   1908   This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:673   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:682   1908   Please read "Readme" file for details
12:53:31:688   1908   This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:696   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:703   1908   Please read "Readme" file for details
12:53:31:710   1908   Pool eth-us-east1.nanopool.org removed from the list
12:53:31:718   1908   This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:726   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:734   1908   Please read "Readme" file for details
12:53:31:741   1908   This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:748   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:756   1908   Please read "Readme" file for details
12:53:31:764   1908   Pool eth-us-west1.nanopool.org removed from the list
12:53:31:771   1908   This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:780   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:788   1908   Please read "Readme" file for details
12:53:31:795   1908   This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
12:53:31:803   1908   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
12:53:31:811   1908   Please read "Readme" file for details
12:53:31:818   1908   Pool eth-asia1.nanopool.org removed from the list
12:53:31:826   1908   ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.





Current rig setup:
Windows 10 64bit
AsRock Z97 Extreme6
Intel Celeron G1840 2.8GHZ
6x XFX Radeon RX 480 8GB (however I can only get 5 to work at this time)
Kingston 120GB SSD
Hyperx Fury 8GB DDR3
HP 1200W PSU dedicated for GPUs
Evga 1000W PSU dedicated to mobo,etc.