Show Posts
Hi everyone,
I've few rigs using Claymore miner (9.4 , windows 10, crimson 16.9.1), I observed both stability and performances are much higher when only one GPU (GB rx 470 4g) is plugged on the rig. I achieved to get 27mhs/500mhs (eth/sc) with one gpu over hours, then I decided to keep these settings which seemed stable enough for the whole rig. However the performances of the 6 gpus are actually much lower, around 22mhs/300mhs per gpu, and the rig crashes often (wattman error). Is there something I can do to fix this issue?
Thanks
I've few rigs using Claymore miner (9.4 , windows 10, crimson 16.9.1), I observed both stability and performances are much higher when only one GPU (GB rx 470 4g) is plugged on the rig. I achieved to get 27mhs/500mhs (eth/sc) with one gpu over hours, then I decided to keep these settings which seemed stable enough for the whole rig. However the performances of the 6 gpus are actually much lower, around 22mhs/300mhs per gpu, and the rig crashes often (wattman error). Is there something I can do to fix this issue?
Thanks
I do not see difference with multiple GPU. So you may reduce the frequnecy to make them more stable.
Maybe it is at 100% handling all the GPU mining
CPU is not a matter. Power draw is not enough or drivers messed up.
