Hi folks,

After the successful (apparently eth merge), me and many others as eth miners, should ask ourselves not only which is the most profitable coin right now but which one will still be lucrative in the future... that means it should be a very solid coin and project

Today ethw is fully operative to be mined but couldn't find anywhere if it is profitable now or not... where could I check that?

Any help and advice would be appreciated, thanks in advance

Hello everybody,

A friend of mine has recently bought an evga 3060 model, and previously he had 3 zotac 3070 running without problems in nicehash.

Yesterday I tried to help him, first of all uninstalling drivers with ddu and downloading beta drivers for the 3060, however windows does not recognize this new card.

As I didn't read about anyone who had mixed cards like these in same rig, the problem could come from mixing this type of cards or more likely it could be the driver?

Even now nicehash does not recognize one of the 3070 so now I'm more confusing :S

Thanks in advance

Hello everybody,

Just would like to ask the experts here (as you can see for my earnings I'm not newbie in this world), why my nanopool daily earnings fluctuate so much even having always same hashrate

As you will see in attached pic, my hashrate is basically the same every day but inexplicably on first days I started receiving every almost 48 hr my 0,05 eth earnings but from 09/05 to 13/05 it changed and payments were done every day... how is it possible?



Thanks in advance and regards

Hi everybody,

I have actually 7 rtx 3070 and I have some problem with one of them. Theorically is one of the best cards out of the box: gigabyte aorus master, but the reality is completely different...

A much cheaper zotac twin edge gets less hashrate, with much less consumption (116w vs 147w) and also is warmer.

The values applied here after so many test are the following: 55 power limit, -502 cc, +1034 memory, 75 fans.

I think there are 2 problems here: one is the core clock speed that I can't reduce more (or don't know how to do - I use Afterburner), as it is operating at 1270 mhz aprox versus 990 mhz of the zotac twin.

The second one is the fuc..... screen of the aorus master, all time running wasting my energy and overheating the card for sure. I have searched over the internet and couldn't be able to find any reference to how to turn off this shit.

Thanks in advance and regards

Hi guys,

Just bought 3 more 3070 (impossible as you know to buy 3080 or 3060ti- at least in my country), so my second rig will have 6 rtx 3070. The problem comes with psu (almost no stock of +1000W anywhere), so I don't know if it would be a good idea to buy a 1200w for 350€ or btter connect 2 700W psu with a cable like this:

https://www.amazon.es/gp/product/B0788KTZPC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hope you can helpe me

Thanks

Hello guys,

I have a problem with my rig and don't know how to solve.

My rig is this one:

psu: absym morpheus 1000w platinum
mobo: ASUS Prime Z390-P
celeron g4900
2x4gb HyperX FURY Black 3200 mhz
2 rtx 3080 ventus 3x
1 rtx 3060ti zotac
3 old risers pci-e (used 3 years ago with rx 580 rigs)

The problem is simple: maybe every hour or less -sometimes it shows no problem for 4 hours- but the result is that pc freezes (miner or bsod) and even I have to reset manually (although I have the miner configured with restart when freezing and reboot bat file).

I have tried phoenix miner and nicehash miner but with both I have same problem. Furthermore, I have tried lowering all memory and core clocks, with no success...

Even I dediced to buy another psu (before I had 2 bitfenix 650w gold connected between them with psu adapter) to see if that was the problem but still failing.

So, don't know what more to try but is absolutely exasperating, because if it happens at night, I can't see it and rig is stopped (even more it is spending 220w with doing nothing...)

Any solution please?

Thanks in advance