Hey Guys,
Would appreciate your help and guidance.
I changed a couple of fans on this T17 miner, before the change it was working fine (just the fans were noisy.) Now that I have added new fans, I am getting the following error would appreciate any help and support. All the 4 fans are showing RPM, not sure why the system is saying only 3 their. When I turn the miner on all the new fans are running. See pastebin link below
https://pastebin.com/XaA97tzD

Again, thanks for the help in advance.
Thanks

2021-09-17 23:04:16 fan.c:103:check_fan_status: Error, fan lost, only find 3 (< 4)
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 0, fan_speed = 5880
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 1, fan_speed = 6000
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 2, fan_speed = 3600
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 3, fan_speed = 6000
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 4, fan_speed = 0
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 5, fan_speed = 0
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 6, fan_speed = 0
2021-09-17 23:04:16 fan.c:106:check_fan_status: fan_id = 7, fan_speed = 0
2021-09-17 23:04:16 driver-btm-api.c:205:set_miner_status: ERROR_FAN_LOST
2021-09-17 23:04:16 driver-btm-api.c:146:stop_mining: stop mining: fan lost

Hey Team,
Does anyone know if there good non-virus Dev Free T17/S17 firmware out there?
Happy to pay one offs as well. Just dont want the regular dev fee thing.
Side note on the l3s i should have just stuck with the blizz firmware, i changed to hiveos worst mistake ever, no extra benefits. Now I cannot roll back
Thanks

Hey Guys,
Quick question, is there a way on the default Bitmain firmware to get the power consumption? Maybe via the API or something?
Thanks

Hey Team
Hope everyone is ok and doing well through these COVID times.
Quick question.
I have a strong background in using Bitmain Miners and this is the first time I have purchased M32 and M31s. Couple of questions
1. Is it fair to assume whatsminers take a while (20 mins) to get up to 100% speed?
2. Whats the average chip and board temperature you guys are seeing? For chips, I am getting 97, not sure if its correct.
Thanks

Selling 22x $200 Coupons  $40 each

Selling 18X $100 Coupons $ 10 each

Hi All,
Thanks for taking the time to read this.
Can anyone here point me towards a point of pos calculator. Basically, I want to put some cash towards staking and find high return crypto coins.
I came across a couple a month ago but now finally have the money to put in this.
I did not bookmark it and cannot find it either
Please help and thanks in advance.

Hey All,
Anyone know where I can get custom Firmware for Antminer L3+, happy to pay need to reduce power and increase hash if possible. I know Blissz did something in this space but couldnt sell due to GPL issue.
Let me know if anyone out there has some ideas
Thanks

Hey All,
Thanks in advance.
I need to ask a question, maybe it is a stupid one.
So bear with me.
Can anyone here advise what sites are good for getting information on super small penny coins stuff that is not mainstream and is on exchanges like etherdelta etc.
Can anyone tell me who to follow or read to trade these very small coins?
Thanks in advance.

Guys I have been looking at some twitter and posts on other channels. A lot of so-called gurus seem to use this platform for trading and news research. Can anyone be nice enough to tell me what it is?
Thanks

See links to snapshot

https://ibb.co/bX4rZb
https://ibb.co/m2HpLG

Hey Guys, Really frustrated not sure what to do here. I bought some STR (XLM) with my hard earned money, I had to live off dimes to save money so I could buy this. Can someone please help me? I had some STR on sell order, then I cancelled the order and decided to withdraw it. When I go to withdraw page it says i have STR but it is on order. Which is quite weird as I cancelled my sell order. Can anyone give me some advise to what to do?
Thanks

Sorry boys to bust this. I think it might be a fraud
 https://goo.gl/QwQp9K

Hey Guys,
Selling 6 L3+ Miners.
Pickup can be arrange in PA/Ohio Area.
Looking for 1 BTC per miner. or Cash
Not going to ship till money is received.
Might be willing to look at escrow, buyer pays fees.
If you are not interested dont post on the link and waste my time.
Thanks

Hey All,
I have 5X September Batch D3s on the way and selling them now. The main reason why we are selling them is our mini DC wont be ready by the time these get in and I dont have enough current power capacity to make these work.

The combo Includes the following
1X Antminer D3 - You know what this is all about.
1X 2400W Power Supply - 120V to 240V Enought to power 2 miners
1X Power Cable
1X Network Cable
2X Home Silencers
2X Filters
1X External Duct Fan.

I am looking for $9.5K per combo. Cash on Pickup somewhere in PA we can work something out.
Open to other payment options, no shipping without payment.

Thanks

Hi All,
I need some advise. What is the best channel for getting Bitmain repairs in USA. I am interested to know peoples opinions?
I am hearing official Bitmain Repair takes over 1-2 months, till that time your miner is sitting and making no money.
Interested in real feedback
Thanks
happy mining

Hey All,
Thanks for reading this and helping in advance.
I interested in buying couple of Pantech Miners, can anyone point to their website.
Thanks

Hey Guys,
Another noob question, please help.
Lets say I buy a power supply which is rated 2400W (2560W at the wall), now I connect an Antminer L3+ to it which is 800W.
Will the actual consumption of electricity be 2560W or 800W (plus power supply factor 10-15%)?
Thanks this has been boggling my head the whole day.
I’m debating if I should future proof and pay extra couple of bucks and buy big PSU units or small?
Thanks much appreciated

Hi All,
Thanks for the help in advance.
As stated in my couple of previous posts I have invested decent sums of money in mining (50K) planning to invest another 200K. Currently refurbishing an industrial  building to help support this operation.
Since this a cost oriented exercise, I would like to see if I can do this under a LLC.
Can anyone advise a good accountant in US who does this Crypto related accounting for a living? I want someone who has done this before for a mining operations, need good advice and guidance rather than someone to fill up forms.
Let me know   

Gents, need some advise.
Interested in purchasing 20X Antminer L3+ when the next batch opens up.
Just would like to know is it worth it anymore? Or should I wait for an upgraded model to come out? by the time I get delivery in October return will be more like S9s i think.
ROI is rapidly diminishing for these Litecoin miners and I cannot find anything better than L3+ anyways.
Appreciate pointers and advise for the gurus
Thanks

[I have access to an Industrial Site with a 600 AMP Single Phase Power in the US with very favourable power costs.]

Hey Gents,
Appreciate the patience as I go through this.
This could also be a noob question so please bear with me.
I have access to an Industrial Site with a 600 AMP Single Phase Power in the US with very favourable power costs.
I am trying to figure out how many 1KWh Miners I can put on this service without killing/burning anyone.
I will need 10 KWh for support equipment such as switches, routers, monitors etc.
Thanks once again, I have tried to look for answers online but getting a little confused with line voltage etc.
Thanks
 

Hey All,
Anyone planning to sell Siacoin?
i need to buy some.
Needless to say will be via escrow.
Can give BTC/LTC/PP. PM me offers
Thanks