 Show Posts
|
|
Pages: [1]
|
|
I am now mining Monero using a vega 56 rig. With new xmr algo planning to roll out in coming Oct., GPU mining for Monero is inefficient so I am going to stop mining it using GPU. But the problem is, what can I mine now with the vega rig?
|
|
|
|
|
So I am totally out of ideas how to fix this.
My rig has 4x rx 480 and 2x 570. Few days ago I updated the windows 10 to latest and DDU the driver and reinstalled 18.6.1. And got code 43 error on one 480 and one 570. Tried different drivers and it is always these two cards has code 43 error. I tried to set either gen1 or gen2 in BIOS (latest as well), no go. Everything works perfect in the last few months. I used patcher every time after I installed the driver.
Any idea how to fix it? The motherboard is Asrock AB350 gaming k4. TIA.
|
|
|
|
|
So I believe I made a terrible mistake. After I used the walletgenerator to generate a paper wallet, I printed it to a pdf file and saved it. I used the public address to mine and to receive my coins. Today when i opened the pdf file and turned out the printing is not full. That is, part of the private key is missing...
Does this mean I can never use the coins in the public address? Is there any way to recover? TIA!!!
|
|
|
|
|
Hi guys,
I have a 1060 and a rx 570 laying around and want to mine some coins. However, a lot of equiHash coins or cryptonight coins are so difficult to mine now. So could you recommend some low diff coins for them?
Thanks!
|
|
|
|
|
Hi there,
I have a little bit ETH balance in nanopool. It is like 0.07 and is less than their min payout (0.1). I do not want to mine ETH for now and in the next few months. Is there anyway to get it out? If not and I just leave it there, will it be confiscated by nanopool if there is no activity for that account in a long time?
|
|
|
|
|
Tried Suprnova, pool.gold and minertopia. Cannot connect to any of them.
|
|
|
|
|
Anyone has any idea the expected hashrate for Vega 56, rx 570 and 1070?
Mine is only 420 for vega 56, 450 for 1070 and 270 for rx 570. Is this right?
|
|
|
|
|
Hi there,
So here are some issues with my rig. I got 2x 570 and 4x 480 on my rig using Calymore dual mining. The cpu is 1700x running at 3.8 for XMR.
I noticed that the power plug of the power strip is kind of hot. Not sure about the actual temp but it is hot. Is this a problem?
Also, the power comsumption reading from the wall is like 1120w. My another rig which has similar config except 5x 1070 only consume 820w on the wall. All the amd cards consume around 100w reading from afterburner. Is this normal or i need to do something about it.
Any suggestions would be very welcome.
|
|
|
|
|
Hi guys,
So here is the problem. I have modded these two cards, one by one, using Anorak's bios. Patched both after modded. Tested on Calymore's dual miner, worked perfectly. Both cpu-z and afterburner can recognize them. BUT, when I put them together, while device manager still show two cards with no issue, afterbuner can only show one of them with right information. The other one is recognized but all information are zero. When i started Claymore's dual miner, it said "EthDcrMiner64.exe has stopped working" and exited. I tried all different pci-e slots, installed and uninstalled many times. I even installed a clean win 10 x64. Nothing works. Separated, they work perfectly. Together, miner did not work at all. Before I modded them, I put them in the same box and they work with 21 m hashrate but stable. Now they did not even start...
When claymore's dula miner stopped working, it did not really recognize the cards. Both card are 4GB but the miner read as 3GB for each.
The rom i am using:
Anoraks_Powercolor RX 570 RedDragon 4GB Hynix Elpida_memshift-1500.rom106 (256 KB)
and
Anoraks_Powercolor RX 570 RedDevil 4GB Hynix-Elpida_memshift.rom39 (256 KB)
Please help. I am out of ideas how to do with them now.
Thanks.
|
|
|
|
|
