I am in China, everything is 240v.
I am using bitmain PSUs.
Warehouse has more then ample cooling and temps hold steady in the 70s.
Each miner is running on its own 16amp circuit.
I have 3 older S9s working fine on the same network.
I have 30 other random miners on the same network working with out issue as well.
Since I am in China I shipped them back to bitmain who sent them right back saying they tested fine. I still had the same issue.
What I have tried:
I flashed them to the latest firmware with no change.
I paid for a second Internet connection and split all my rigs up thinking maybe I had a bandwidth issue but same problem with the same miners.
I swapped them out to 3 different network switches.
I swapped them out with other known working bitmain power supplies. (all i have are bitmain brand)
I changed them to other cat 6 cables I was not having trouble with.
I split them up on completely separate power meters. (I have 4 separate powerlines and meters coming into my warehouse)
I cried for a moment but it did not seem to fix anything.
Things of note:
I am on fiber internet using 2 modem/router integrated units that come from the isp. I tried to clone mac and use the loid to use my own modems and routers with no luck. Not sure how the ISP is blocking my equipment but they said I can only use their equipment and this was all they offered. Both connections are 100m and routers sadly do not even offer a bridge mode.
If you have any suggestions before I spend thousands of dollars upgrading from consumer internet to commercial I am all ears.
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000314] ps7-ttc #0 at df804000, irq=43
[ 0.000626] Console: colour dummy device 80x30
[ 0.000660] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040216] pid_max: default: 32768 minimum: 301
[ 0.040446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042632] CPU: Testing write buffer coherency: ok
[ 0.042981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043041] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043267] L310 cache controller enabled
[ 0.043286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121047] CPU1: Booted secondary processor
[ 0.210234] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210370] Brought up 2 CPUs
[ 0.210389] SMP: Total of 2 processors activated.
[ 0.210397] CPU: All CPU(s) started in SVC mode.
[ 0.211067] devtmpfs: initialized
[ 0.213499] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214765] regulator-dummy: no parameters
[ 0.223355] NET: Registered protocol family 16
[ 0.225670] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.227989] cpuidle: using governor ladder
[ 0.228003] cpuidle: using governor menu
[ 0.235534] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237083] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237097] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237218] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259420] bio: create slab <bio-0> at 0
[ 0.261052] vgaarb: loaded
[ 0.261772] SCSI subsystem initialized
[ 0.262671] usbcore: registered new interface driver usbfs
[ 0.262849] usbcore: registered new interface driver hub
[ 0.263086] usbcore: registered new device driver usb
[ 0.263624] media: Linux media interface: v0.10
[ 0.263782] Linux video capture interface: v2.00
[ 0.264031] pps_core: LinuxPPS API ver. 1 registered
[ 0.264043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264170] PTP clock support registered
[ 0.264534] EDAC MC: Ver: 3.0.0
[ 0.265630] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268639] DMA-API: preallocated 4096 debug entries
[ 0.268654] DMA-API: debugging enabled by kernel config
[ 0.268743] Switched to clocksource arm_global_timer
[ 0.289905] NET: Registered protocol family 2
[ 0.290582] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290639] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290723] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290771] TCP: reno registered
[ 0.290790] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291078] NET: Registered protocol family 1
[ 0.291411] RPC: Registered named UNIX socket transport module.
[ 0.291423] RPC: Registered udp transport module.
[ 0.291431] RPC: Registered tcp transport module.
[ 0.291439] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291453] PCI: CLS 0 bytes, default 64
[ 0.291911] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293973] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296138] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296342] msgmni has been set to 967
[ 0.297162] io scheduler noop registered
[ 0.297175] io scheduler deadline registered
[ 0.297213] io scheduler cfq registered (default)
[ 0.310390] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.310411] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.435034] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003550] console [ttyPS0] enabled
[ 1.007854] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015510] [drm] Initialized drm 1.1.0 20060810
[ 1.032801] brd: module loaded
[ 1.042263] loop: module loaded
[ 1.052124] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057872] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065838] libphy: XEMACPS mii bus: probed
[ 1.070313] ------------- phy_id = 0x3625e62
[ 1.075049] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.083682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090446] ehci-pci: EHCI PCI platform driver
[ 1.097662] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104504] usbcore: registered new interface driver usb-storage
[ 1.111424] mousedev: PS/2 mouse device common for all mice
[ 1.117531] i2c /dev entries driver
[ 1.124515] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130048] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135931] Xilinx Zynq CpuIdle Driver started
[ 1.140823] sdhci: Secure Digital Host Controller Interface driver
[ 1.146919] sdhci: Copyright(c) Pierre Ossman
[ 1.151347] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158084] mmc0: no vqmmc regulator found
[ 1.162125] mmc0: no vmmc regulator found
[ 1.198763] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207459] usbcore: registered new interface driver usbhid
[ 1.212968] usbhid: USB HID core driver
[ 1.217731] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224026] nand: Micron MT29F2G08ABAEAWP
[ 1.227994] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.233938] Bad block table found at page 131008, version 0x01
[ 1.240161] Bad block table found at page 130944, version 0x01
[ 1.246214] 3 ofpart partitions found on MTD device pl353-nand
[ 1.251993] Creating 3 MTD partitions on "pl353-nand":
[ 1.257085] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265148] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272462] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281491] TCP: cubic registered
[ 1.284728] NET: Registered protocol family 17
[ 1.289457] Registering SWP/SWPB emulation handler
[ 1.295381] regulator-dummy: disabling
[ 1.299770] UBI: attaching mtd1 to ubi0
[ 1.827252] UBI: scanning is finished
[ 1.838943] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846001] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.852798] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.859480] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.866311] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.872324] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.879434] UBI: max/mean erase counter: 14/6, WL threshold: 4096, image sequence number: 1134783803
[ 1.888533] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897767] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.897772] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901813] ALSA device list:
[ 1.901817] No soundcards found.
[ 1.918236] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.978008] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.983958] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.993072] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.002956] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.007981] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.019575] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.026999] devtmpfs: mounted
[ 2.030135] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.872123] random: dd urandom read with 0 bits of entropy available
[ 3.268788]
[ 3.268788] bcm54xx_config_init
[ 3.878783]
[ 3.878783] bcm54xx_config_init
[ 7.879606] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.885708] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 23.185447] In axi fpga driver!
[ 23.188556] request_mem_region OK!
[ 23.191907] AXI fpga dev virtual address is 0xdf9fc000
[ 23.197017] *base_vir_addr = 0x8c510
[ 23.212933] In fpga mem driver!
[ 23.216005] request_mem_region OK!
[ 23.219598] fpga mem virtual address is 0xe2000000
[ 24.018241]
[ 24.018241] bcm54xx_config_init
[ 24.648143]
[ 24.648143] bcm54xx_config_init
[ 28.648633] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 28.654740] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 571.797216] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 802ca5881c208814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[11] has core num=1
Chain[5] ASIC[20] has core num=1
Chain[5] ASIC[29] has core num=1
Chain[5] ASIC[42] has core num=1
Chain[5] ASIC[48] has core num=2
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[6] has core num=1
Chain[6] ASIC[13] has core num=1
Chain[6] ASIC[15] has core num=4
Chain[6] ASIC[26] has core num=2
Chain[6] ASIC[32] has core num=1
Chain[6] ASIC[39] has core num=2
Chain[6] ASIC[42] has core num=15
Chain[6] ASIC[49] has core num=1
Chain[6] ASIC[50] has core num=1
Chain[6] ASIC[56] has core num=2
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[2] has core num=1
Chain[7] ASIC[3] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[5] has core num=1
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[8] has core num=1
Chain[7] ASIC[9] has core num=1
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[11] has core num=1
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[13] has core num=1
Chain[7] ASIC[14] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[18] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=2
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=1
Chain[7] ASIC[25] has core num=1
Chain[7] ASIC[26] has core num=1
Chain[7] ASIC[27] has core num=1
Chain[7] ASIC[28] has core num=1
Chain[7] ASIC[29] has core num=1
Chain[7] ASIC[30] has core num=1
Chain[7] ASIC[31] has core num=2
Chain[7] ASIC[32] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-6,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-6,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1352 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1677 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 802ca5881c208814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[2] speed=4440
get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
get fan[2] speed=4440
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[11] has core num=1
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[29] has core num=1
Chain[J6] ASIC[42] has core num=1
Chain[J6] ASIC[48] has core num=2
Chain[J7] has core num in PIC
Chain[J7] ASIC[6] has core num=1
Chain[J7] ASIC[13] has core num=1
Chain[J7] ASIC[15] has core num=4
Chain[J7] ASIC[26] has core num=2
Chain[J7] ASIC[32] has core num=1
Chain[J7] ASIC[39] has core num=2
Chain[J7] ASIC[42] has core num=15
Chain[J7] ASIC[49] has core num=1
Chain[J7] ASIC[50] has core num=1
Chain[J7] ASIC[56] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[2] has core num=1
Chain[J8] ASIC[3] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[5] has core num=1
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[8] has core num=1
Chain[J8] ASIC[9] has core num=1
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[11] has core num=1
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[13] has core num=1
Chain[J8] ASIC[14] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[18] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=2
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=1
Chain[J8] ASIC[25] has core num=1
Chain[J8] ASIC[26] has core num=1
Chain[J8] ASIC[27] has core num=1
Chain[J8] ASIC[28] has core num=1
Chain[J8] ASIC[29] has core num=1
Chain[J8] ASIC[30] has core num=1
Chain[J8] ASIC[31] has core num=2
Chain[J8] ASIC[32] has core num=2
miner total rate=13888GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-6
Chain:5 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=656
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-6
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-6
Chain:5 base freq=656
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=662
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Detect a bad chip=42 on chain[6], fixed to 400M
Asic[42]:662 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=662
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-6
Chain:7 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:7 max freq=631
Chain:7 min freq=631
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,-6,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-6 typeID=55
New offset Chain[5] chip[244] local:50 remote:52 offset:30
Chain[J6] chip[244] get middle temp offset=30 typeID=55
Chain[J7] PIC temp offset=62,-4,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[6] chip[244] local:45 remote:48 offset:29
Chain[J7] chip[244] get middle temp offset=29 typeID=55
Chain[J8] PIC temp offset=62,-6,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-6 typeID=55
New offset Chain[7] chip[244] local:44 remote:48 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4561 voltage limit=890 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 890
retryFlag=1 will set the voltage limited on chain[5], change voltage=890
now set pic voltage=91 on chain[5]
single board rate=4562 voltage limit=890 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4512 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26056
last_nonce_num:42885
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=662 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26330
last_nonce_num:42885
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=908 asic[02]=909 asic[03]=907 asic[04]=909 asic[05]=909 asic[06]=912 asic[07]=907
asic[08]=911 asic[09]=905 asic[10]=906 asic[11]=907 asic[12]=908 asic[13]=906 asic[14]=908 asic[15]=910
asic[16]=912 asic[17]=912 asic[18]=908 asic[19]=908 asic[20]=910 asic[21]=905 asic[22]=908 asic[23]=908
asic[24]=912 asic[25]=910 asic[26]=909 asic[27]=911 asic[28]=909 asic[29]=910 asic[30]=908 asic[31]=902
asic[32]=905 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=908
core[002]=4
asic[02]=909
core[062]=5
asic[03]=907
core[007]=3
asic[04]=909
core[045]=5
asic[05]=909
core[015]=5
asic[07]=907
core[087]=3
asic[08]=911
core[086]=7
asic[09]=905
core[040]=1
asic[10]=906
core[002]=2
asic[11]=907
core[096]=3
asic[12]=908
core[112]=4
asic[13]=906
core[081]=2
asic[14]=908
core[024]=4
asic[15]=910
core[030]=6
asic[18]=908
core[104]=4
asic[19]=908
core[013]=4
asic[20]=910
core[078]=6
asic[21]=905
core[042]=5 core[057]=4
asic[22]=908
core[032]=4
asic[23]=908
core[013]=4
asic[25]=910
core[112]=6
asic[26]=909
core[008]=5
asic[27]=911
core[093]=7
asic[28]=909
core[109]=5
asic[29]=910
core[096]=6
asic[30]=908
core[019]=4
asic[31]=902
core[003]=2 core[055]=4
asic[32]=905
core[023]=5 core[052]=4
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57341
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25803
last_nonce_num:28656
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=324 total_tv_end_sys=325
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
get RT hashrate from Chain[6]: (asic index start from 1-63)
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=30
read failed, old value: Chain[5] Chip[62] local Temp=74
read failed on Chain[5] Chip[62] middle Temp old value:83
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=29
read failed, old value: Chain[6] Chip[62] local Temp=69
read failed on Chain[6] Chip[62] middle Temp old value:79
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
read failed, old value: Chain[7] Chip[62] local Temp=67
read failed on Chain[7] Chip[62] middle Temp old value:77
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0