Show Posts
|
Pages: [1] 2 3 »
|
1
|
Economy / Computer hardware / WTS - S17, S19, T17
|
on: February 28, 2024, 02:36:30 PM
|
Hey everyone. I'm selling off my BTC mining equipment as my electrical costs have just gotten too high. Here is what I have:
Two of the s19 95TH, currently running awesome miner on sd card (0.025 BTC each) Two s17 pro 53 TH also currently on Awesome miner but no card needed (0.01 BTC each) One s17 pro 53 Th with 2/3 boards working. Third one is hit or miss, so I'll just call it 2/3 (0.006 BTC) One T17 I think it has awesome miner, but may be stock. I haven't even plugged this one in for a log time now, I'll plug it in and make sure its functional here in the next few days (0.005 BTC)
Happy to sell as a set or break it up. Open to offers, as only the s19s are plugged in right now. I'd really like these to go to someone who can use them.
Shipping from NYS, only shipping to US.
|
|
|
2
|
Economy / Computer hardware / WTB s19 - JUST 1
|
on: January 27, 2023, 03:49:57 PM
|
I'm looking at getting back into mining. I don't have the power or room for a bulk order, so I'm looking for just one s19, any version is fine, but I'd prefer the one that has the easy sd slot access. eBay is around $1500, so I'm looking in that price range. Likely will want escrow unless it is someone I've dealt with in the past.
What ya got?
|
|
|
4
|
Economy / Computer hardware / WTS T17 - USA
|
on: October 14, 2022, 05:07:05 PM
|
Hey gang. My electric is stupid expensive now, so my T17 isn't worth running anymore and it's sitting in a box. Open to offers, let me know if you want one or could use parts. Don't want to mess with ebay, it's a pain. Escrow always welcome if you find someone and pay the fee.
|
|
|
5
|
Economy / Computer hardware / WTS/WTT s9 for L3+
|
on: March 20, 2022, 06:44:17 PM
|
I also am in the market to sell my s9. Would also be willing to trade for an L3+.
ebay is selling s9's for 300- 400, so make me an offer.
No PSUs in the deal.
|
|
|
11
|
Economy / Computer hardware / WTB 1 Hashboard - T17s SUCK
|
on: October 07, 2021, 08:13:43 PM
|
Running on 2/3 hashboards in my 42TH Bitmain T17 right now, just curious if anyone has a spare that I could buy. Also willing to send dead one back to you if you are in the know about repairs.
|
|
|
14
|
Economy / Computer hardware / ALL SET
|
on: August 26, 2021, 10:29:44 PM
|
My kid needs a new graphics card for his computer. Not for mining, gaming. I can't find GPUs anywhere for a reasonable price, so I figured I'd look here and see what people had. Looking to keep it under $500
|
|
|
15
|
Alternate cryptocurrencies / Mining (Altcoins) / L3+ hashboard error
|
on: April 20, 2021, 07:53:03 PM
|
Hey everyone, I have 3 good boards and one that does this in the kernel:
(none) local0.err cgminer[375]: L30: work 48 not find error
I have switched cables, psus etc. Its definitely the hashboard, but it shows all 72 asics and they are all "o" not "x"
Any idea what's going ton or how to fix it?
|
|
|
16
|
Economy / Computer hardware / WTB 1 L3+ hashboard OR anyone repair them? - ALL SET
|
on: April 19, 2021, 09:25:04 PM
|
I had a chip come off in transit. I have used thermal adhesive to replace heatsinks, but this looks like the chip fell off WITH the heatsink. The board was good, and the chip fell off in transit as a replacement board. I am in the market for a replacement or someone who can solder that chip back on.
LMK price and what you have.
Might also consider buying a partial working L3+ and frakenstein-ing one good machine together.
|
|
|
17
|
Bitcoin / Mining support / Innosilicon T2TH+ 37T - autotuning FOREVER?
|
on: February 27, 2021, 05:18:02 PM
|
I recently became the owner of an older Innosilicon T2TH+ 37TH.
It has the slider for like 16 different modes from efficiency to performance, and when I got it it was on "balanced ++" and had been tuned I assume. It ran at 28TH and pulled 2200w from the wall. Which isn't great I didn't think. So I slid the slider to "factory." Well that was 12 hours ago and it's drawing 2900w now and only hashing at 29TH AND still says:
"Please note the miner is autotuning, hashrate may vary until completion!"
How long does this normally take? Also will it save my "autotuning" for next time or when I move the slider again to I have to sit through a week of autotuning again?
Thanks in advance for you knowledge and input. I've had bitman and cannan stuff, this is my first inno unit!
|
|
|
18
|
Bitcoin / Mining support / Weird T17 Fan
|
on: February 17, 2021, 03:43:05 AM
|
I have one fan that won't spin up over 1800 rpm.
On 100% I get fan1 = 5860 fan 2 = 5840 fan 3 = 1800 fan 4 = 5880
I switched the fan for a new one, still 1800. I swapped the leads at the control board for fan 2 and fan 3 and now fan 2 is 1800. Seems like where the fan plugs into the control board maybe be wonky. Anyone else ever see this? I checked using a piece of paper and the one fan does seem to "suck" less.
|
|
|
19
|
Economy / Computer hardware / WTB T17 or similar sha-256
|
on: February 14, 2021, 02:32:29 AM
|
I know prices are nuts right now, but let me know if you have an extra miner to sell. Tried buying on eBay but that has been a trainwreck for me. - Fell apart one more time.
Also would consider Avalon 10 series (I am really beginning to like them!)
Let me know what you have forum escrow a must unless I have dealt with you before.
Anyone???
|
|
|
20
|
Economy / Computer hardware / WTS Busted T17 - SOLD
|
on: February 11, 2021, 06:53:20 PM
|
I got screwed on ebay. Shocking I know....
Anyway. I have a T17 42TH with:
Good PSU Good Controller One Good hashboard - rock solid One Hashboard that shows 3/30 chips sometimes, and 30/30 other times. But when 30/30 shows it throws a temp sensor error One Hash board that sometimes shows 30/30 but usually shows 24/30 and the machine just shuts that board down.
I have tried stock firmware, I have tried custom, vinish, hiveon, and braiins. All with the same results. One board good, the other two wishy washy but usually non-functioning
Maybe you can do something with it. Guy on ebay sold it "as is" with 2 good hashboards and one dead one. Well that doesnt seem to be the case and neither he, nor ebay will help.
Anyway, lesson learned and is there anyone out there who wants a project and what can I get for it? Hoping to recoup some of my stupidity losses here...
Let me know here or via PM
|
|
|
|