I know this topic has previously been discussed a lot, but Im wondering if there are any legit cloud mining services anyone can recommend?

Hey guys,

Ive been mining for the last 4 years but my GPU's are old. 1080's and 1080 ti's. I was wondering if the 3060 and 3070 ti's are worth it? Is there a better option?

So I wanted to test this as far as power consumption. I noticed when running it, my cards were much, much hotter. It did not register though with Afterburner. My thought process was it somehow overrode the settings without triggering it somehow. I ran it for a month straight. To my surprise, my electric bill went up over $150. This was the only change that was made. I have 7 cards. 1 EVGA 1080ti, 5 EVGA 1080s and one MSI 1070ti.

Im looking to get all my money out of coinbase. They are pure crooks. I withdrew money over 5 weeks ago and its not in my bank, but my coinbase account was debited. No email replies. No one on the phone can help and honestly doesn't seem to give as shit.

Is it EWBF?

Hey guys. I added a fifth RX 580 Spahire Nitro+ Special Edition and have been having issues. It's super laggy and claymore takes awhile to load and when it does it keeps rebooting itself. At first it ran but all cars were zero M/H. I did DDU and reinstalled but Claymore still wont run.

Hey guys, Im running a spare 1200 PSU on a 4 card RX 580 rig. I want to add another card, but there are not enough outputs for a 5th card. Obviously my PSU has plenty of power. Is there any type of splitter I can safely use?

Ive been using yiimp.masterhash.us as a pool. I have the official ORE wallet. I've tripled checked my address. No payments have gone to my wallet but according to pool, I've been paid out.

My ZCL will not connect to the network for about a week now. Anyone have any ideas?

Can anyone point me in the right direction here? Using  claymore miner. 4 AMD Rx 580's. Bios flashed and patched.

I can't get the rig to read the 4 AMD cards I installed. I read some threads where it said to change the PCIE lanes to Gen 1, which I did, but it still isn't picking them up. Any suggestions?

This is the motherboard I picked up for a second rig (AMD). Im using a 7th Gen Celeron Processor for this that supports 2133 DDR4 Ram, which the motherboard supports. The RAM I bought doesn't fit. It's 288 pin, but the little cutout doesn't match up right. I want to order another stick, but I want to make sure I get it right.

Motherboard: http://www.biostar-usa.com/app/en-us/mb/introduction.php?S_ID=865

RAM: https://www.amazon.com/Patriot-Signature-Frequency-2133MHz-PC4-17000/dp/B07351P9GD/ref=sr_1_12?ie=UTF8&qid=1523489600&sr=8-12&keywords=DDR4+Ram+2133

Looking to set up a second 4-6 AMD rig. I have everything but the MOBO and CPU. I can get a really good deal on them, but is there really any difference for mining between these two?

I just installed a new motherboard and PSU and powered on the GPUs. I did not plug the GPUs into the motherboard yet, just the PSU. I installed windows and let it update and then I downloaded some miners and wallets I use. It would shut off after and hour or so than turn back on and repeated.

Hey guys, I had to get a new MOBO for my rig. My ASROCK h110 pro BTC+ shit the bed so I ordered an ASUS B250. If I plug any sata cables in, it wont boot up at all. I have two PSU's. A 1000w and an 850. I've tired all of them plus another one I have not in use. Nothing. Sometimes it wont even start up. When it does, the bios loads fine, but it does not read my SSD. Im at a complete loss here. Ive tried different RAM, double checked the CPU seating. It all seems fine. I have the main PSU plugged into the A 24 pin slot and the second plugged into the B slot. All ATX power cables plugged in from the same PSU that's plugged into the A slot.

IM pretty sure my Asrock h110 BTC pro + is done for, so I need to get a new.

Im thinking of the same H110 Pro BTC+

or

Asus B250 Mining expert

or Gigabyte GA 250.

Am using between 8-10 cards.

Hey guys. I have a weird situation. Since day 1, when I boot the computer, there a the Asrock splash screen with the option to get into the bios settings. All of a sudden today its gone. All I see is  "no signal" until Windows boots up. Ive tried repeatedly hitting ESC, F2, F11 or delete. Nothing. How can I get into it?

I added a new card for a
 total of 9. 2 AMD and the rest Nidvia. Everything was fine before. Max power is 70%, GPU clock 0 and memory +300. Two PSUs ♧. One 1200w and one 1000w. 8 GB of RAM.

Loooomg for an OC program for 9 GPUs, or if anyone knows a way I can disconnect my AMD GPUs off ml of Afterburner?

In everyone's opinions (yes, I know all cards are different), what's been your optimal settings for "power savings" and performance?