Updated with current specs, always pushing the limits like most of us... I've been manufacturing an 8 GPU rig for a few months now, as a follow-on to 4 and 6 GPU open frame rigs I've been making for a few years... Initially this unit used Radeon 380s and now Radeon 470/480s. Some may have seen it listed on ebay, I sell some there but it's primarily for the exposure, most units are sold direct to large farm operators who are running 50+ units at a time.

I do sell to individual miners as well and have been doing that for some time, posting this to share some details on the system and make it available via the forums.

The units run a fully custom Linux load, or a customized version of ethOS depending on the end users coin, they can mine most anything as with any GPU rig, given how many GPUs are in the system I sometimes need to customize the miner or it's launcher so it runs properly. Web based configuration provided, no need to SSH into the system to change wallet/pool, or other common settings. Most miners are shipped pre-configured at the request of the customer so they are plug and play.

Prices start at $3600 USD + shipping for single systems and go down under $3,000 as the quantity goes up. Payment via cashiers check, wire transfer, BTC, ETH, Credit Card via Paypal (verified billing/shipping address) all supported.

Systems are manufactured and shipped from the east coast of the US, worldwide shipping available. Turn around time before shipping averages 5 business days, however, a number of large orders have been recently placed so please reach out to confirm lead time.

ETH: 235Mh/s ~1160W, ~1260W when dual mining
ZEC: 2100H/s ~1160W
XMR: 6400H/s ~950W

These shots are from my 380 unit, 470 unit almost identical minus change in cards, use of EVGA G2 1300, and some strengthening of the chassis in my latest model revision to better handle shipping...

I've been manufacturing an 8 GPU rig for a few months now, as a follow-on to 4 and 6 GPU open frame rigs I've been making for a few years... Initially this unit used Radeon 380s and now Radeon 470/480s. Some may have seen it listed on ebay, I sell some there but it's primarily for the exposure, most units are sold direct to large farm operators who are running 50+ units at a time.

I do sell to individual miners as well and have been doing that for some time as well, posting this to share some details on the system as I have had a few people from the forums ask me about them...

The units run a fully custom Linux load, or a customized version of ethOS depending on the end users coin, they can mine most anything as with any GPU rig, given how many GPUs are in the system I sometimes need to customize the miner or it's launcher so it runs properly.

Prices start at $3600 USD for single systems and go down under $3,000 as the quantity goes up.

ETH: 230Mh/s
ZEC: 1200H/s
Power Usage ~1150W on 220V+, 1250W On 110V

These shots are from my 380 unit, 470 unit almost identical minus change in cards, and some strengthening of the chassis in my latest model revision to better handle shipping...

I worked on this firmware a few months ago and got it working, leveraging much of the experience I picked up building the original padrino firmware for the Jupiters. I ended up setting it aside as other projects started coming up..

in short this allows the KNC Jupiter Controllers (Beaglebone Black) to run KNC Titans, it also supports all variations of the KNC Jupiters as well, not at the same time due to how the FPGA controls the cubes, however you can boot with all KNC Jupiter (November/October), KNC Neptune, or all KNC Titan cubes without issue.

Since I am not going to have time to offer this to the community directly I am listing the firmware with source and build instructions, it has not been released anywhere else so the buyer(s) can do with it what they like, release it, or spin it into a paid offering like GenTarkin.

Given the value of the RPi bridge boards this looks to have some real value to the right audience..

Asking 6 BTC, my reputation on the forums is solid, however escrow is supported but only through a well respected and trusted agent that will verify the code themselves to ensure functionality before release.

The following is included:

- Working unified firmware and source for all KNC SHA/Scrypt miners for the Beaglebone
- 1 KNC Titan Cube
- 1 KNC Neptune Cube
- 8 KNC Beaglebone Controllers - Can make all Titan controllers, or whatever other KNC hardware.
- ~25 KNC November/October Jupiter Boards, no heatsinks (your call if you want them)

[NIB Sapphire RX 480 8GB $235]

Posting some things I don't have any need for currently..

Payment in BTC/ETH or Paypal (for trusted members), all items shipping from the US, will ship internationally.

Shipping is actual cost, generally FedEx Ground/Hoe Delivery or USPS is least expensive depending on location.

(It's been asked a bunch of times, Yes they run 6 GPU just like the H81 BTC Pro) 63 - ASRock H97 Anniversary Motherboards - $75 USD each... All used for approximately one month before being pulled as I standardized all farm systems on the H81 Pro BTC. They do not come with the original box or manual/faceplate, they will be packaged in an ASRock H81 BTC Pro box for shipping purposes.

NIB Sapphire RX 480 8GB $235 & 4GB Card $225 USD



3 - XFX RX 480 4GB Reference Cards (they are launch reference cards, should be capable of a flash to 8GB but I have not verified) - $225 USD & 1 XFX RX 480 DD Card $210 -  Used for 8 hours of testing

From the AMD promotion, providing the Steam codes themselves.

Hitman (2016) - 0.03BTC

Ashes of The Singularity - 0.03BTC

PM with purchase request, codes will be delivered via forum PMs after payment is received. 1CPi7VRihoF396gyYYcs2AdTEF8KQG2BCR will be used for all transactions.

If anyone wants any left me know....

Anyone needing 2880W PSUs to go along with them hit me up, I have plenty..

Offering up some of my overstock of Powered PCIe 1X Risers and 6 pin to 8 pin PCIe.

Shipping to the lower 48 starts at $2 USD depending on quantity ordered, PM for additional locations.

USB Risers with 6 pin PCIe Power, 50cm USB Cables - Ship with blue USB cables

$9 USD



6 pin to 8 pin PCIe Connectors, 18AWG

3 for $5 USD



Powered PCIe Ribbon Riser supporting PCIe 6 pin, or molex power.. Good for setups using server PSUs

I was asked by some people for a package of 6, $35 shipping included..

Single $4 USD

Some items for sale, will update from time to time....

11 7 Razer Ouroboros Wireless/Wired Gaming Mouse available

0.05BTC + shipping each. estimate $5-10 depending on location

Have a number of systems at various hosting providers which are now available, will be sending from the hosting providers directly, units are at Toom.im and Great North..

I was moving them all to one of my facilities but I ended up dedicating the power to another project so they are all available immediately.

Will support Paypal for trusted members....

Shipping anywhere at buyers expense, for bulk buyers freight is an option. In the US FedEx Ground/Home Delivery between $10-$40 depending on location and miner.

2 - SP30 4.5Th/s - 0.8BTC each

12 11 - SP20 1.6Th/s with DPS-1200 - 0.38BTC

4X KNC Titan Cubes and Controller, all performing at 100%

Will ship anywhere at the buyers expense..

SOLD - Will also support Paypal for trusted members...

Quick sale, it's gone..

Going through some old mining equipment I no longer need, have roughly two dozen hashing boards...

Shipping from the US...

18 November Modules... Most function great, one or two may have a bad core..

10 October Modules... Most function great, one or two may have a bad core..

2x controller boards

Send offers

Have a pile of 0.05 BTC coupons, selling for 0.01 BTC, make offers as well.. No issues discounting for bulk purchases..

Looking for 5, had some failures over time and a couple I let others borrow never came back..

In any case please PM pricing, I can cover shipping..

Not much to say since it's new in box, shrink wrap never removed..

2 BTC shipping included, escrow accepted if the buyer would like to utilize..

I have 5 boards left over from my days of running Jupiters and producing the padrino firmware for them (100+ boards in total)..

I do not know if they are working or not, they were tucked away in a parts box and I do not have a controller to test them with.. I know at least one needs work, as you can see in the picture with the connector..

In any case I'm thinking $20 + shipping for all of them...

I snapped pictures of each board..

Toss me offers, shipping from the east coast..

I've had this for a while but do not use it anymore...

17" iMac, reloaded OSX 10.6.8 on it and verified it's ready to go..

$150 shipped to lower 48...

17" iMac model iMac4,1
Intel Core Duo 2.0GHz
2GB RAM
250GB HDD
DVD-RW Drive
Keyboard/Mouse

Packed in factory box.

Small mark on screen, captured in one of the pictures.

Received 4 of these in a trade, all cards tested with Heaven for a few hours and all perform like new with no issues.

Cards shipped in anti static bags in 290X brown GPU boxes (the internal box from Sapphire 290X cards)

$225 shipped to lower 48

I am trying to stay away from ebay where possible so I thought I would reach out and see if there is any interest in the following, I posted some others things last year and didn't get much traction so before I pull pictures I figured I would ask...

Futaba 4PKS & Case
Spektrum AR7200BX
Spektrum AR6100s (a few)
Futaba Gyros

New Align Trex 450L Dominator
1/16 Traxxas E-Revo Brushless
May sell one of my 1/10 E-Revo Brushless as well (custom build)