[Moderator's note]

so for the 3rd time my A3 has shutdown for 45 mins it looks like and I'm not sure why, do I need to return it? Does anyone understand from the log what the problem is? Any help greatly appreciated.

Code:

Apr  3 19:06:11 (none) local0.notice cgminer[375]: chain 1 reinit 5067.57
Apr  3 19:06:11 (none) local0.notice cgminer[375]: chain 2 reinit 4552.05
Apr  3 19:06:11 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02930844 crc5 error,should be 00,but check as 11
Apr  3 19:06:11 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:06:12 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:06:13 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:06:13 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:06:13 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:06:13 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:06:13 (none) local0.notice cgminer[375]: open device over
Apr  3 19:06:13 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:06:13 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:06:14 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:06:14 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:06:14 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:06:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:06:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:06:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:06:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:06:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:06:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:06:16 (none) local0.notice cgminer[375]: open device over
Apr  3 19:06:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:06:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:06:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:06:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:06:18 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:08:13 (none) local0.notice cgminer[375]: chain 0 reinit 76177.07
Apr  3 19:08:13 (none) local0.notice cgminer[375]: chain 2 reinit 4895.72
Apr  3 19:08:13 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:08:14 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:08:15 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:08:15 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:08:15 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:08:15 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:08:15 (none) local0.notice cgminer[375]: open device over
Apr  3 19:08:15 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:08:15 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:08:16 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:08:16 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:08:16 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:08:17 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x6d9429ae crc5 error,should be 00,but check as 04
Apr  3 19:08:17 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:08:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:08:18 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:08:18 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:08:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:08:18 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:08:18 (none) local0.notice cgminer[375]: open device over
Apr  3 19:08:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:08:18 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:08:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:08:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:08:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:10:15 (none) local0.notice cgminer[375]: chain 0 reinit 135963.83
Apr  3 19:10:15 (none) local0.notice cgminer[375]: chain 1 reinit 5840.44
Apr  3 19:10:15 (none) local0.notice cgminer[375]: chain 2 reinit 4466.25
Apr  3 19:10:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:10:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:10:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:10:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:10:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:10:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:10:16 (none) local0.notice cgminer[375]: open device over
Apr  3 19:10:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:10:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:10:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:10:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:10:17 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:10:18 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:10:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:10:20 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:10:20 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:10:20 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:10:20 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:10:20 (none) local0.notice cgminer[375]: open device over
Apr  3 19:10:20 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:10:20 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:10:21 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:10:21 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:10:21 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:10:22 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x2f42b1e4, diff: 0xa3, wc: 0x19, crc_received: 0xff, crc_checked: 0x10,chainid: 0x00
Apr  3 19:10:22 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:10:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:10:23 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:10:23 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:10:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:10:23 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:10:23 (none) local0.notice cgminer[375]: open device over
Apr  3 19:10:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:10:23 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:10:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:10:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:10:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:12:16 (none) local0.notice cgminer[375]: chain 0 reinit 4466.47
Apr  3 19:12:16 (none) local0.notice cgminer[375]: chain 1 reinit 5067.67
Apr  3 19:12:16 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x44238c01, diff: 0xa2, wc: 0x5e, crc_received: 0xff, crc_checked: 0x18,chainid: 0x01
Apr  3 19:12:16 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:12:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:12:18 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:12:18 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:12:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:12:18 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:12:18 (none) local0.notice cgminer[375]: open device over
Apr  3 19:12:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:12:18 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:12:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:12:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:12:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:12:20 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x40c29ca0 crc5 error,should be 00,but check as 05
Apr  3 19:12:20 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:12:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:12:21 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:12:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:12:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:12:22 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:12:22 (none) local0.notice cgminer[375]: open device over
Apr  3 19:12:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:12:22 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:12:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:12:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:12:23 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:14:18 (none) local0.notice cgminer[375]: chain 1 reinit 4637.92
Apr  3 19:14:18 (none) local0.notice cgminer[375]: chain 2 reinit 80392.75
Apr  3 19:14:18 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:14:18 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:14:19 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:14:19 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:14:19 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:14:19 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:14:19 (none) local0.notice cgminer[375]: open device over
Apr  3 19:14:19 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:14:19 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:14:20 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:14:20 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:14:20 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:14:21 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0xc48bfe01, diff: 0xa3, wc: 0x5c, crc_received: 0xff, crc_checked: 0x00,chainid: 0x01
Apr  3 19:14:21 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:14:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:14:23 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:14:23 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:14:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:14:23 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:14:23 (none) local0.notice cgminer[375]: open device over
Apr  3 19:14:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:14:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:14:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:14:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:14:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:16:20 (none) local0.notice cgminer[375]: chain 0 reinit 4724.12
Apr  3 19:16:20 (none) local0.notice cgminer[375]: chain 2 reinit 5067.71
Apr  3 19:16:20 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:16:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:16:21 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:16:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:16:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:16:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:16:21 (none) local0.notice cgminer[375]: open device over
Apr  3 19:16:21 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:16:21 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:16:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:16:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:16:22 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:16:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0xfa84aeaf crc5 error,should be 00,but check as 10
Apr  3 19:16:23 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:16:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:16:25 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:16:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:16:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:16:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:16:25 (none) local0.notice cgminer[375]: open device over
Apr  3 19:16:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:16:25 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:16:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:16:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:16:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:18:21 (none) local0.notice cgminer[375]: chain 0 reinit 5411.15
Apr  3 19:18:21 (none) local0.notice cgminer[375]: chain 1 reinit 5153.51
Apr  3 19:18:21 (none) local0.notice cgminer[375]: chain 2 reinit 5067.60
Apr  3 19:18:21 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:18:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:18:23 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:18:23 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:18:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:18:23 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:18:23 (none) local0.notice cgminer[375]: open device over
Apr  3 19:18:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:18:23 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:18:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:18:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:18:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:18:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x03f84944 crc5 error,should be 00,but check as 0e
Apr  3 19:18:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:18:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:18:26 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:18:26 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:18:26 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:18:26 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:18:26 (none) local0.notice cgminer[375]: open device over
Apr  3 19:18:26 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:18:26 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:18:27 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:18:27 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:18:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:18:28 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x204aa68c, diff: 0xa3, wc: 0x00, crc_received: 0x80, crc_checked: 0x16,chainid: 0x00
Apr  3 19:18:28 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:18:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:18:30 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:18:30 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:18:30 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:18:30 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:18:30 (none) local0.notice cgminer[375]: open device over
Apr  3 19:18:30 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:18:30 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:18:31 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:18:31 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:18:31 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:20:23 (none) local0.notice cgminer[375]: chain 0 reinit 4724.10
Apr  3 19:20:23 (none) local0.notice cgminer[375]: chain 1 reinit 4552.32
Apr  3 19:20:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x012f4dc4 crc5 error,should be 00,but check as 02
Apr  3 19:20:23 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:20:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:20:25 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:20:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:20:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:20:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:20:25 (none) local0.notice cgminer[375]: open device over
Apr  3 19:20:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:20:25 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:20:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:20:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:20:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:20:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:20:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:20:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:20:28 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:20:28 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:20:28 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:20:28 (none) local0.notice cgminer[375]: open device over
Apr  3 19:20:28 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:20:28 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:20:29 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:20:29 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:20:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:22:25 (none) local0.notice cgminer[375]: chain 1 reinit 3607.25
Apr  3 19:22:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0122ba29 crc5 error,should be 00,but check as 0e
Apr  3 19:22:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:22:26 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:22:27 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:22:27 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:22:27 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:22:27 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:22:27 (none) local0.notice cgminer[375]: open device over
Apr  3 19:22:27 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:22:27 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:22:28 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:22:28 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:22:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:24:27 (none) local0.notice cgminer[375]: chain 0 reinit 4466.25
Apr  3 19:24:27 (none) local0.notice cgminer[375]: chain 1 reinit 5067.59
Apr  3 19:24:27 (none) local0.notice cgminer[375]: chain 2 reinit 4981.53
Apr  3 19:24:27 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x62f4b2a0 crc5 error,should be 00,but check as 12
Apr  3 19:24:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:24:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:24:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:24:29 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:24:29 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:24:29 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:24:29 (none) local0.notice cgminer[375]: open device over
Apr  3 19:24:29 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:24:29 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:24:30 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:24:30 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:24:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:24:31 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:24:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:24:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:24:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:24:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:24:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:24:32 (none) local0.notice cgminer[375]: open device over
Apr  3 19:24:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:24:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:24:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:24:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:24:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:24:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x006bad96 crc5 error,should be 00,but check as 0d
Apr  3 19:24:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:24:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:24:36 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:24:36 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:24:36 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:24:36 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:24:36 (none) local0.notice cgminer[375]: open device over
Apr  3 19:24:36 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:24:36 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:24:37 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:24:37 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:24:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:26:29 (none) local0.notice cgminer[375]: chain 0 reinit 4638.10
Apr  3 19:26:29 (none) local0.notice cgminer[375]: chain 1 reinit 5668.77
Apr  3 19:26:29 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x011ea229 crc5 error,should be 00,but check as 17
Apr  3 19:26:29 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:26:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:26:31 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:26:31 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:26:31 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:26:31 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:26:31 (none) local0.notice cgminer[375]: open device over
Apr  3 19:26:31 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:26:31 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:26:32 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:26:32 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:26:32 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:26:33 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:26:33 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:26:34 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:26:34 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:26:34 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:26:34 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:26:34 (none) local0.notice cgminer[375]: open device over
Apr  3 19:26:34 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:26:34 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:26:35 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:26:35 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:26:36 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:28:30 (none) local0.notice cgminer[375]: chain 0 reinit 4809.67
Apr  3 19:28:30 (none) local0.notice cgminer[375]: chain 1 reinit 4980.98
Apr  3 19:28:30 (none) local0.notice cgminer[375]: chain 2 reinit 3864.68
Apr  3 19:28:30 (none) local0.notice cgminer[375]: reset_hash_board_low 2
Apr  3 19:28:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:28:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2
Apr  3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Apr  3 19:28:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Apr  3 19:28:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Apr  3 19:28:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Apr  3 19:28:32 (none) local0.notice cgminer[375]: open device over
Apr  3 19:28:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Apr  3 19:28:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Apr  3 19:28:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:28:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Apr  3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Apr  3 19:28:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, 
Apr  3 19:28:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02a21429 crc5 error,should be 00,but check as 05
Apr  3 19:28:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:28:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:28:35 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:28:35 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:28:35 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:28:35 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:28:35 (none) local0.notice cgminer[375]: open device over
Apr  3 19:28:35 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:28:35 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:28:36 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:28:36 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:28:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, 
Apr  3 19:28:37 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x203bbce2, diff: 0xa0, wc: 0x00, crc_received: 0x80, crc_checked: 0x17,chainid: 0x00
Apr  3 19:28:37 (none) local0.notice cgminer[375]: reset_hash_board_low 0
Apr  3 19:28:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:28:39 (none) local0.notice cgminer[375]: reset_hash_board_high 0
Apr  3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Apr  3 19:28:39 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Apr  3 19:28:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Apr  3 19:28:39 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Apr  3 19:28:39 (none) local0.notice cgminer[375]: open device over
Apr  3 19:28:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4
Apr  3 19:28:39 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Apr  3 19:28:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:28:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Apr  3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Apr  3 19:28:40 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, 
Apr  3 19:30:32 (none) local0.notice cgminer[375]: chain 1 reinit 4638.21
Apr  3 19:30:32 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0033c928 crc5 error,should be 00,but check as 02
Apr  3 19:30:32 (none) local0.notice cgminer[375]: reset_hash_board_low 1
Apr  3 19:30:32 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Apr  3 19:30:33 (none) local0.notice cgminer[375]: reset_hash_board_high 1
Apr  3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain
Apr  3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Apr  3 19:30:33 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Apr  3 19:30:33 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Apr  3 19:30:33 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Apr  3 19:30:33 (none) local0.notice cgminer[375]: open device over
Apr  3 19:30:33 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Apr  3 19:30:33 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Apr  3 19:30:34 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Apr  3 19:30:34 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Apr  3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Apr  3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Apr  3 19:30:35 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,

sorry its so long, but this is what has happening when it was shutdown, I have no idead what most of it means.


Moderator's note: This post was edited by frodocooper to add code tags.

I'm getting no response from these guys so ill start a thread

missing more payments from them, TX ids are "error no such result found" more than a few coins, starting to look like a scam?

kronecoin this time 8232f2bc783d1de04ac0f0e096548eb84754ec81bbfac8287568e0c8a1764904

82.91070085 coins

http://kroneblocks.org/search

am I missing something, last time was Bitbar coin, before that Octocoin, all the missing payments TX ids and invalid......WTF!!!!

I would seriously have to advise anyone AGAINST investing in Genesis mining contacts.

My experience over the last 2 months sucks a55, here is what has happened so far!

I purchased my contract about 2 months ago, a small 1000H/s monero mining contract. For the first 30 days, since its a credit card they hold your payouts, which is totally acceptable. Then after 30 days they switch it over to the payout list area. Now heres my gripe....

There are around 10-12 days in which NO xmr payout is listed, i keep opening tickets and all i get is some simple gimp continually replying that the payment has been added to my payout amount but will not show me where or how it was, i cannot find any payments for 10+ days of XMR and im supposed to just accept their word for it. Are they serious? Who the eff does business that way? Imagine you bought bitcoin and someone assured you it was in your wallet but you cannot see it?

I am not on my 6th ticket, 5 replys are so effing stoopid its mind blowing...

A few replies to show the rapier wit


*****************************************************************

Thank you for contacting us and we apologize for the delayed reply.
 
 Since the hold period for your contracts ended, all the accumulated payouts were transferred to the PAYOUTS section but not to your wallet because the amount to be sent is too small.
 
The minimum amount to be paid out is 0.4 XMR, so your payouts are accumulating in your coin balance and will be sent to you when they reach the minimum amount for transfer.
 
Since currently we don't have a 'total balance' option in the PAYOUTS section, you can get more information by hovering your mouse over an "i" icon under "My payouts" section on your account for each mining day and summing them up.
 
However, our IT department has informed us about a technical glitch in our payout engine, so as a result, some reports are not visible in accounts. Balances were updated accordingly and these coins will be sent to your wallet, along with the others, during the next transfer.
 
So, you don't have to worry, everything is in order with your mining and your payouts and as soon as they reach 0.4 XMR, they will be automatically sent to your wallet.
 
Another thing, the graphs on our website are based on payouts, so until payouts to your wallet occur, they will show nothing.
 
Thank you for your understanding.

Best regards,
Marcus
Genesis Mining Customer Service

**********************************

I would love to Marcus but there is no friggen payout to hover over you clown!

**********************************

First of all, we apologize for a delayed response.
We are receiving a significant number of tickets at the moment. You can read about the reasons on our blog.
 
We are doing our best to get back to our customers in the shortest time possible and your patience and understanding is highly appreciated!

Our IT department has informed us about a technical glitch in our payout engine so, as a result, some payout reports are/were not visible (for example XMR mining days 26 - 29 01 etc.) but transfers to the wallet have been made, balances were properly updated (coins were added to total balance even though payout report is not visible) and these coins already are or will be sent to your wallet, included in the next transfer (along with all the coins balanced until the minimum amount for transfer is reached).
 
Also, it may happen that you have not received some payouts to your wallet immediately due to them being under the minimum amount of transfer. On our customer's requests and a large number of complaints towards wallets which charge high transaction fees, we have increased minimum amounts to be transferred.
 
Your payout amounts are always accumulating in your coin balance and are paid out to you when the amount reaches the minimum amount required for transfer.
The XMR minimum payout amount is 0.4 XMR.
 
Unfortunately, we do not have a Total balance option yet on the website but we hope in the near future that will be one of the features we add to improve customer review of their account. You can see each payout individually on PAYOUTS page and check an "i" icon next to each payout for additional info about payout amount.

If you are missing a report for mining day when transfer to the wallet should have happened (amount is above 0.4 XMR), please first check your wallet directly and look for the amount of 0.4 XMR on dates after that mining day.

If coins weren't transferred to your wallet, contact us by replying to this e-mail and we will check it with our IT department.
 
For all other inquiries besides the one from the subject of your ticket (missing Crypronight XMR payout for mining day 26. January 2018. (and other mentioned mining days)), you will have to create a new ticket.

Please keep in mind that all new tickets with the same inquiry will be automatically closed.
 
We apologize for the inconvenience and thank you for your patience and understanding.


I hope my explanation clarifies your inquiry.

Best regards,

Sandy
Genesis Mining Customer Service

***************************************

again, another rude leader of industry, how can I check if its missing when I don't effing know how much is missing???

I can draw the conclusion that the requirements to work at genesis mining are not very high!


Invest in genesis? Wow not really a good move and I'm so happy I only got the 1 small contract, there clowns cannot add a balance page to your profile where you can actually see how much they owe you!

Really useless!

worldwide Stock markets dropping will affect ALT prices?

im thinking it might go one of 2 ways, already spooked investors will put their money back into fiat bank accounts and wait this out or look for other options which will boost Crypto prices with some new $...

Opinions?