All the blades currently have AMD Opteron 6174 chips installed and the other chips (6200 series) that you will presumably use for mining are separate. There are 17 C7000 chassis in total however I believe one of them is damaged from when they were shipped to me so I am not officially including it, just throwing it in with the shipment. payment in crypto if possible is preferred but not mandatory, will cut a deal for quick easy sell in crypto.

More equipment info: There is 16 C7000 chassis and the blades are a mix of BL465 G7 and BL685 G7 blades. There are enough blades to fill about 10 of the chassis. There is no ram and no hard drives. I will throw in a couple hundred gigs of 2rx4 pc10600 ram sticks, its all I have. The chassis have 2450 watt psu's, Onboard Administrator cards, 1gb Ethernet pass-through interconnect cards, 2gb fiber interconnect cards. I don't have an exact count of all the interconnect cards since they aren't pertinent to mining . As for CPU's there are 303 - 6200 series chips. The models and counts are as follows.

https://imgur.com/a/vfghaJU


AMD Opteron 6200 series:
6282 - 6
6276 - 207
6274 - 34
6272 - 2
6238 - 14
6234 - 38
6220 - 2

AMD Opteron 6100 series:
I don't have an exact count for these chips. Almost every blade has them either installed or were removed and will be included. There are also some from blades that I have previously sold so If I had to guess id say roughly 400 6100 series chips.

Price 1 btc or equivalent


Thanks

I have available 16 HP C7000 bladecenters that I need to sell. These are not all completely full of blades. I think I probably have enough blades to fill 10ish of the chassis. The chassis do have their normal components though. (psus, fans, onboard administrators, internet passthroughs, and a bunch of fiber cards.) The blades are BL465 and BL685 G7's and they all have amd opteron 6174 chips in them. No ram and no hard drives. However, I also have roughly 300ish upgraded cpus that are available to go along with sale. Most of them are Amd Opteron 6276 with some other various version of the 6200 series
I have a bit of ram but hardly mentionable for this much equipment so ill just omit it.

im guessing this equipment will fit on about 4 pallets. I realize this posting isnt complete for an actual sale but its a lot of work to go through and get specific counts on everything. When I have a serious buyer i can put together a more complete list.

I am looking for someone to take it all off my hands. If I can find someone interested I will make a screaming deal. I have been selling pieces of it here and there but unfortunately need to liquidate. The Bl685 blades with 6276 chips and 16gb of ram I have been able to sell for about 500 a piece (just for reference, this isnt what I will be charging my potential buyer of this lot.)

So if you need a ton of processing power or if you want to piece it out for profit get back with me. The faster I can sell it all the cheaper it will be.

This item is an HP Bladecenter C7000 chassis populated with 8 BL685 G7 blade servers.

Each Blades Servers Config:

4 x AMD Opteron 6276 cpus - 16 core/16mb of cache  - 512 cores total for bladecenter
16gb of ram
2 x nics
Fiber Channel card

No hard drives included:

Chassis:

10 x Fans
2 x Onboard Administrator Modules
6 x 2400watt High Efficiency PSUs
2 x HP 1Gb Ethernet Pass-Thru Modules
2 x Fiber Modules

These chips are ideal for mining Cryptonight/CryptonightV7 algo.

16kh+/-

Power Usage is highly dependent on environment. The colder the better obviously. I would say 4500-6000watts.  

These are generally run in Enterprise server environments but I have one running from the house just fine.

Right now I run a diskless environment that boots a custom Ubuntu image into ram and runs a script to setup the mining config.  
The hard drive for this environment isn't included. You can do this on your own or buy hard drives for the blades and use normally, they are pretty cheap.

5000.00 usd I will entertain offers as well but this is the cheapest one with these specs I can find.

Shipping is a buyers expense but I will help facilitate.  I am in the USA.

Crypto accepted and we can use an escrow if you want.

This is a stock image. If and when you are interested Ill gladly get some pics.

Edit: I have a few of these available if someone is looking for a bulk buy.

Brand new community we are building on Telegram. Limited to 2000 members and then we are closing the doors.

Join now so you don't miss out on our giveaways:

1st giveaway of $50 worth of coins @200 members

2nd giveaway for $100 worth of coins at 500 members.

3rd giveaway for $200 worth of coins at 1000 members.

4th giveaway will happen after our first pump when we reach 1500 members, for a total value of $1000


Here is the Channel:

https://t.me/the1000percentclub

We also have a Telegram open chat group.  We like transparency and a place for people to voice their opinions or just chat and as I said before we are looking to build a community. 

https://t.me/the1000pclubchat


Make sure to join both to be eligible for the prizes.

Looking for a dope chip for my board since my main board went out and now im running my main pc on a miner board/cpu...yuck.  Let me know thanks.

Up for sale is my beloved 2005 Mitsubishi Evo 8 MR. 62,000 miles. I am selling for no reason other than my situation changing and needing the money at the moment. I am the second owner and this car is in great mechanical shape. This has always been my number one priority hence why it still sits stock on the outside. This car has always been worked on by a specialized mechanic and as far as he or myself knows it's in great condition. I have owned it for about 6 years and put only about 32,000 miles on it. When I bought the car with 30k on the clock I did a full 60k tuneup along with some upgrades. I have had all fluids changed every 15k. I just put in a new oem clutch about 2k miles ago and there is no shifting or lockout issues as common with some clutch changes. The reason there is no BBS wheels is because the previous owner swapped them out before trading the car into the dealership I purchased it from. Interior is in great condition overall with some driver seat wear, a little fade on the top of the back seats from the sun, there is a small scratch next to the passenger door handle, and a couple nicks near the center console. I'd say 8/10 to be reasonable. The exterior has a couple of small issues. There is a scrape on the left rear bumper, there is a couple of small nicks on the back of the rear bumper and one on the trunk. The car has no front lip and has some expected nicks on bumper and hood from rocks. This was a daily driver so it has been driven. I have never raced/tracked/dragged/launched this car. The underside of the wing has some clear coat fade and the brake calipers have some clear coat fade, both of which are standard on evos. This car does not burn oil or have any leaks.
This was a California car and is great for California because of the stringent laws on modified vehicles. I have done what I can to retain stock appearances. I have had 2 smogs with this vehicle and it has passed both visual and emissions testing. The only thing necessary to achieve this is to put on a stock turbo back exhaust.
It will take very minimal cosmetic work for this to be an outstanding representation of the final year of the Evo 8 MR.
It was street tuned conservatively on 91 gas. Boost is set a conservative 21lbs tapering to 19lbs. I have never dynoed it but judging by other cars with similar mods its around 330whp. This can easily be pushed higher if wanted. The car rips, it's spools fast and pulls hard.

Parts list:
3" Magnaflow Full Titanium Catback Exhaust (8lbs)
3" DC Sports Downpipe w/ Cat Delete
3" Injen Upper Intercooler Piping
3" AMS copy Lower Intercooler Piping
10.5 hotside
Aftermarket o2 housing with Stock heat shield welded on for stock appearance
AEM Intake pipe with C.A.R.B. legal sticker
Blitz SUS filter
Helix 272 cams
Helix cam gears
Kevlar Timing Belt
ARP Headstuds
Metal Headgasket
Walbro 255 High Flow Fuel Pump
Precision 1000cc Injectors
Evo 9 BOV
Crucial Lowering Springs
Exedy Stock clutch - 2,500 miles
New Pads and Rotors put on about 5,000 miles ago
Plenty of life on Falken Tires.

I have plenty more pictures. If serious you can contact me and ill get them to you.

Hello I have 3 Dual x 7950's and 2 vapor x 280x graphics cards.  They are all in working condition however i think they all need at least 1 new fan.  I havent ran them for a while and am just looking to get rid of them but they are not burnt out, just need new fans. I believe new fan sets are 20-30 bucks last time I checked. sold as is.   Thanks

edit. 280x's are Sapphire VAPOR-X AMD Radeon R9 280X 11221-02-40G






Edit: will take trade for asic sha's. let me know what ya got

looking for a good motherboard/cpu and possible ram combo.  Not looking for cheap processors! I have plenty of those from mining equipment and they are pissing me off as my main pc because my other board took a crap.  This is a Brand new power supply which run for about 300.00.  Let me know what you have and lets make a deal.

SOLD

This auction for a running Team Losi Drift R Electic 4 wheel drive drifting r/c car.  This car is currently setup to drift with hard tires.  If you put regular rubber tires on it is quite a fast r/c car in itself.  I have owned lots of r/c cars and this is one of my favorites.  Sale comes with Car, Remote Control, and Battery and battery charger.  I paid 5-600.00 bucks for this setup when new and it has very very little run time.  There is no top to the car which has no effect on performance.  i'm a legit seller but we can use escrow if you want.

2 - Brand New never used LEPA G1600 80+ Gold PSU with all cables.  Still under warranty, less than a year from purchase date. shoot me a pm as i'm more likely to see it.  

1 - Silverstone Tek 1500W ATX12V/EPS12V SLI Ready CrossFire Ready 80 PLUS Silver Certified Modular Active PFC Power Supply (ST1500)

Thanks.

http://www.amazon.com/1600-Watts-Crossfire-Certified-Modular-G1600-MA/dp/B007W5TV6K/ref=sr_1_1?ie=UTF8&qid=1411712377&sr=8-1&keywords=lepa+g1600





http://www.amazon.com/gp/product/B002BH3Z84/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1

1500 mAH extended battery case.  Brand New. Make Offer. Shoot me PM as ill more likely see that.  Thanks

http://www.vsszone.com/wp-content/uploads/2012/09/Powerskin-Galaxy-S-III-case.jpg

Sapphire Radeon R7 240 1GB DDR3 HDMI/DVI-D/VGA with Boost PCI-E Graphics Card - brand new

I have 3 or 4 of these, all brand new in box.



Make offer.




Thanks

1 - LEPA G Series 1600-Watts ATX12V/EPS12V SLI Ready Crossfire 80 Plus Gold Certified Full Modular 240-Pin 1700 Power Supply (G1600-MA) - brand new

Make offers.


Thanks

Looking to buy *bulk* antminer s1's. Please shoot me pm. Thank you.

Looking for a couple of sets of fans so I can fix some of my cards that have bad fans.  Most of them only have 1 fan bad so a couple of sets should get it done for me.  please shoot pm.  Thanks

Hello, up for sale is 4 Antminer S1.  $800 plus shipping. prefer BTC.  This is a package deal only for 800.00 plus shipping.  I am in the U.S.  I Will ship out immediately



900.00 plus shipping for 5 antminers

Hello, This post is for 2 Sapphire VAPOR-X AMD Radeon R9 280X 11221-02-40G.  These are still 392.00 new on Amazon

http://www.amazon.com/Sapphire-VAPOR-X-PCI-Express-Graphics-11221-02-40G/dp/B00FLMKR32

I am looking for .33 btc each shipped.  shipping is usps 2 day priority its about 15 bucks per card.  I want to sell both to same buyer if possible but isn't necessary. I'm in the U.S.


Thank you

shoot me pm if you have one available

Standard clocking and volting - 180gh each - $225.00 equivalent in BTC each  about .38BTC   Escrow is fine.