 Show Posts
|
|
Pages: [1]
|
So i decided to upgrade to an RTX3080TI as I needed a little more performance, I purchased the TI3070ti brand new around 2 months ago and was a few days over the return period. Due to this, Im putting it up on here as well as a few other places. The card has barely been used and wasnt used at all for mining. It is an LHR card, however this is currently one of the most capable graphics processors out for consumers. If you play games, this is definitely a card you want. Yes, it supports ray tracing. Price is $750 + shipping firm, this card is very difficult to find in stock as you probably already know. Includes everything it did when purchased new, will also provide a receipt so you can retain factory warranty. I'd prefer not to use escrow (yes, i have previous feedback here), however I'll consider it. You would need to pay any escrow fees though. Btw, I'm located in the US. No escrow for international.    |
|
|
|
I have a limited run NFT by Bitverse named Hodl Bpunk, which I originally purchased off Mintable. There were 100 minted and they cannot be purchased anymore except through private sale. Bitverse is also giving free airdrops regularly just from holding this NFT, so it will keep on giving returns. Offering for 0.2ETH, I don’t mind doing escrow as long as you are around to complete the transaction at the same time as me. Also, buyer is responsible for any escrow fees.  |
|
|
|
I'm sure there are various services you can use for 3d prints, however I'm offering high quality 3D prints in primarily ASA, PETG, and Carbon fiber PLA. These are usually much more difficult to print for most, and given that I've been doing this for a while now and have the proper equipment to print these more specialized filaments, I figured I'd offer my services to anyone that wants it. I can also do normal PLA if you really want. Here are some details on the filaments I'm offering: ASA -- Revised version of ABS plastic with the following characteristics: UV Resistant, Weather resistant, high thermal resistance, Structurally rigid, high tensile strength Main uses: Outdoor parts, parts that will be in sunlight, car parts, drone parts PETG -- A form of PET plastic with the following characteristics: High impact, heat, and solvent resistance, smooth surface finish Main uses: Chemical resistant containers, heat resistant parts, food industry Carbon Fiber PLA -- PLA infused with carbon fiber strands which increases overall strength and stiffness of the part while retaining the ease of printability of PLA Main uses: parts needing high rigidity while maintaining detail properties of PLA, drone parts -- The largest print surface I have is 210mm x 190mm x 200mm. I use a heated bed as well as a heated enclosure, which makes printing filament such as ASA no problem. I'm also able to offer custom CAD if needed, but I'll create a separate post under services when I have the time for it. If you're needing a part made, just send me a PM and we can discuss a little further before I provide you with a quote. I've printed hundreds, if not thousands of prints so here's just a few of my latest prints for others:    Lastly, I do post-processing on the parts which is something most places won't do beyond the very basics. I can do sanding/deburring, heat treating/annealing, all the way to vapor forming ASA for a mirror-like finish. Let me know what you need and I'm sure we can work something out. |
|
|
|
I'm moving here soon, so doing some "Spring Cleaning". I have a 10oz .999 fine silver bullion bar by 9 Mint. I purchased it originally from APMEX so it is guaranteed to be 10 ounces of .999 fine silver. It will come in the original box. This is the exact item: https://www.apmex.com/product/156274/10-oz-cast-poured-silver-bar-9fine-mintI'll accept $240 for it, shipped anywhere in the USA. This is $2+ less than spot, so no I will not accept any less for it. And no, I am not willing to use escrow for this amount. I've made various trades on here with positive feedback, so obviously I'm not new. I may have some other silver pieces to sell, will see here in the next few days. |
|
|
|
|
So apparently Sumcoin can only be sold at General Bytes ATMs in the US - thing is I seem to only be able to find 1-way ATMs by them. Has anyone actually seen with their own eyes a General Bytes ATM that has Sumcoin enabled as an option for selling? Kinda ridiculous that they chose this as their only method of exchange.
|
|
|
|
|
So i have a good bit of Sumcoin that i'm looking to possibly sell, and apparently they can only be sold at General Bytes ATMs. Anyone seen one around them that accepts Sumcoin? Would be willing to sell for less than its worth to you if so. Have close to $10k worth, let me know if you're interested in working something out.
|
|
|
|
|
Does anyone know if these things are still circulating? Was looking to possibly buy a few, the higher the amount the better.
|
|
|
|
I bought a Keepkey about a month ago but decided to just keep using my Trezor ever since I found out that Exodus started working with it. Will sell it for $20 + shipping. They are currently selling for $49 + shipping on their site, so this is over half off despite it being brand new and unopened. The Keepkey is still factory sealed with the hologram seal still in tact as well of course. No escrow as its just $20 (I don't mind you paying in any popular altcoin). I've done deals in the past here in a similar fashion for smaller amounts, no issues whatsoever. USA Shipping Only - May possibly ship international but you would be responsible for shipping costs/duty. UPDATE: SOLD (finally)  |
|
|
|
So I purchased an A1954 iPad 6th gen with cellular built in a few months ago that had an MDM lock on it and just never got around to unlocking it. There are various services online that will unlock it, ranging from about $10-45 (the most well known is https://iactivate.host). I know for a fact that these can be easily unlocked, however I ended up getting a brand new iPad for Christmas so I no longer need this one. Given that its a fairly new ipad model (2018), they currently sell for $400 new. Since this one is MDM locked and you'll have to do a little work to use it, I'm willing to let it go for $90 + shipping obviously in crypto. Doubt you'll see this model sell for this price even with an icloud lock on it as it can sell for more than this just in parts alone. USA shipping is greatly preferred over international. Again, keep in mind this is the cellular edition, which you can use a data SIM card with (model is $100 more than the wifi edition). The iPad is in perfect condition as it was in a case apparently when I purchased it. Absolutely no scraches, cracks or dings in the case or the screen. Battery seems quite healthy and there are no issues with it aside from the MDM lock. Ive confirmed that there is no icloud lock on it. Due to the price, i'm not really looking to do escrow. Will provide you with ample photos of it though upon request. You can also see my Bitrated info in my signature below. I did a sale here with a known member without escrow and had no issues whatsoever, which you can see in my profile. If you have any questions, please let me know. |
|
|
|
So I purchased a Keepkey about a month ago but decided to just keep using my Trezor ever since I found out that Exodus started working with it. I'm looking to get $20 for it, i'll pay for standard shipping unless you want to pay $5 extra for priority. They are currently selling for $49 on their site, so this is over half off despite it being brand new and unopened. The Keepkey is still factory sealed with the hologram seal still in tact as well of course. Prefer no escrow as its just $20 (I don't mind you paying in any popular altcoin). I've done deals in the past here in a similar fashion for smaller amounts, no issues whatsoever. USA Shipping Only - May possibly ship international but you would be responsible for shipping costs/duty. |
|
|
|
|
So I have an almost new white Trezor One hardware wallet for sale - Its been sitting around for almost a year as I purchased it at the same time as the Trezor Model T thinking I'd use both. Never ended up happening and its just been collecting dust. Make me an offer in crypto and we'll see what we can do to make a deal.
Yes I've sold something here at BCT successfully, please check my feedback.
|
|
|
|
|
Is it just me, or is there still no option for 2fa here at BTT yet? I feel like it would significantly decrease the chances of people hijacking accounts on here...Its hard to take sites seriously these days that don't offer 2fa.
|
|
|
|
|
So I've been in the web development industry for well over a decade now, and I figured I'd offer some services on here. One that comes to mind is developing ecommerce stores for people who want to accept cryptocurrency. As I do custom dev, I can set it up to either use a third party (allowing for more accepted coins), or if you only want to accept the main coins I can set it up to directly pay your wallet. With the latter, I can even set it up to automatically check for the payment and process the order automatically once it's received a specified number of confirms.
Of course I can set up the site to accept card as well with any gateway you choose but I figured I'd talk more about something that pertains to the site which is crypto. If you need something specific, whether ecommerce related or not let me know and we can discuss details. I would provided my portfolio here, but I don't want people stealing my stuff and saying that its theirs (which I've had issues before on such community-based sites). If you're truly interested in seeing some of my past work, contact me directly and I will provide them to you privately. I'm quite confident you will approve of my past work, as most of it is mid/enterprise level ecommerce projects with a few larger names that you may have heard of.
|
|
|
|
So it looks like I’ve got one MSI Armor Radeon 570 left over from a previous build. It’s still under factory warranty, was purchased on Newegg. Have receipt if needed. I have it priced to sell quick, just trying to do some early spring cleaning. I’ll have some other random mining hardware for sale here and there so keep an eye out for them, I’ll most likely be selling cheap to just get rid of it rather than collect dust. Please, no ridiculous negotiations...I’m selling the thing for $55 when I bought it for like $200...literally wasn’t even used, as I couldn’t fit a 6th card in my miner build. So essentially brand new. I’m sure I at least tried it once after purchasing to make sure it worked however. Anyhow $55 + shipping takes it. USA shipping only, cheapest is around $7 in factory box. You’re more than welcome to provide postage for me if you think you can get it cheaper. First person to pay for it takes it, wallet address will remain the same for all my listings here for history since I’m a newbie here (technically): 1736codvt7MpLz9DwWKVzuDFzvy9TfRQPg   https://imgur.com/gallery/HhjI6Sg |
|
|
|
Both have been Sold to @Hhampuz - Just waiting for payment, but I trust he'll come through given his feedback on here  Thanks everyone!
So I've got a 1987 silver Liberty dollar and a 2011 Buffalo silver 1o coin for sale at the moment, figured I'd start with some small priced items to get my ratings up here on BCT. The 1987 will probably rate at like a 67-69 if you were to get it graded - I've seen ones selling for over $100 graded at this mark. Willing to sell for $30 shipped USPS First Class w/ tracking, or in BTC right now:  Yes, its guaranteed to be a .999% pure silver coin, one ounce. The 2011 Buffalo coin isn't as good of condition as the Liberty dollar, but still no crazy blemishes or anything like that. Willing to sell the Buffalo for $20 shipped with USPS First Class w/ tracking , or in BTC:  Yes, this one is also guaranteed to be .999% pure silver as well, one ounce. I would rather not do escrow for such small amounts, but if you REALLY need escrow I'm willing to do it for $5 extra to the purchase. If you want both, will be $50, or  in BTC at the moment. I will upgrade shipping for you to priority tracked for free if you order both together. If interested, please PM me on here. First ones to pay gets the offer: 1736codvt7MpLz9DwWKVzuDFzvy9TfRQPg . If I receive more than 1 offer per coin, rest will be returned minus the mining fee it will cost to send it back. Will update below on availability: + 1987 Silver Liberty Dollar - Available+ 2011 Buffalo Ounce Coin - Available  
|
|
|
|
(Mar-22) FINAL PRICE DROP: I originally put this wallet up for sale at $65, and incrementally dropped the price since then. It is now at the ABSOLUTE lowest price i'm willing to let it go for, which is just $40. Thats $47 SHIPPED - You def won't find one this new for this low in price. Someone please scoop this amazing deal - If it doesn't sell by the end of this upcoming weekend I'll most likely just keep it and use it specifically as a 2-factor device for u2f. If I end up keeping it, Ill leave the listing here but raise the price to $70 shipped. -------- So I ended up buying both a Trezor One as well as a Trezor Model T at the same time a few months back from the Official online Trezor store thinking I'd be using both of them. Come to find out, one is more than enough for me since you can create multiple wallets for each coin within the same hardware wallet. Anyhow, I figured I'd put up the Trezor One for sale so that someone who needs one can get one at almost half the price. I'm a big advocate of everyone using hardware wallets, as the majority of the coin hijacked from people wouldn't have been possible had they been using one of these babies. I actually purchased this before the price drop recently, paid around $120 shipped or so for it. You can currently buy the Trezor One for 95 Euros on the Trezor site including international shipping (they ship from overseas), which equates to $110 USD. Given that mine is pre-owned (I highly doubt you'll even be able to tell as I barely even used it), and the fact that I'd like to help someone out by selling them one of the best hardware wallets out right now at an affordable price, I'm willing to let go of it for $47 SHIPPED anywhere in the USA (will ship USPS Priority), essentially half off from the price right now at Trezor. If you want to waste time and use escrow over this small trade, I'll still do the deal with you, but the price will be $67 w/ escrow. Why can I justify this? Well, if I wanted to wait on funds, I'd just list it on ebay and wait every step of the way. I'm on Bitrated and I've got 100% feedback on LBC with over 120BTC traded is why. I don't want to hear "but your account is new..blah blah bah..scam..blah blah." Like I said, you have the option for escrow too, but given I have to wait for the money, you'll pay a little more for that extra time. Even at $67, its a great deal though as you still save $50 from the current market price. CONDITION ------------- Its in like-new condition, not to mention it looks almost indestructible by design (at least under normal/semi active wear and tear). No signs of wear, no cracks or noticeable scuffs even. I've only used this one a handful of times, so you're getting essentially a new Trezor One. WATCH OUT FOR FAKES & HACKED WALLETS ON EBAY ------------------------------------------------------------- You may see ones on ebay selling for $49 at first glance, but the shipping is ALWAYS at least $13 which brings the total to a minimum of $63. THis set aside, the riskiest part about buying a hardware wallet on ebay at a deeply discounted price is questionable authenticity and/or tampering with the firmware of the device. I guarantee that this one was only owned by me - I have the invoice as proof that I purchased it directly from Trezor's online store. Guaranteed to be authentic and in original condition! Wallet Features/Details: https://trezor.io/ (official Trezor site) Please don't waste my time and try to haggle - the price is SET. It's definitely worth 1/3 the price of what I originally paid for it a few months ago. If you can't afford $47 for a hardware wallet of this caliber, clearly you have no need for one in the first place. Again, this one I have for sale has NOT been tampered with in any way, this goes for both the hardware and software - Yes it has an official Trezor firmware on it. And yes, it will come completely wiped exactly as it was when I first received it from Trezor. I don't know what I did with the retail packaging, but you don't need the box to use it obviously. Im sure I can pull the invoice online if you ever need it for warranty though, just ask. Here's the realtime price in BTC: No Escrow Price ($47):  - or - Escrow Price ($65):  What you see is what you will get in the photos below. Photos are of the actual wallet being sold - Cable is included, software for your PC to sync with it must be I'll also throw in a USB-C adaptor for those that want to use it with their new Macbooks that only come with USB-C.    Thanks for dropping in to take a gander at what i've got for sale at the moment, I will update this listing as sold once I receive funds for it, and I'll also include your username here for transparency of the trade. If you still see prices above, its still for sale (at that price). If you got this far in the listing and you're interested in making the purchase, just follow these simple directions so that I can have the hardware out for you the same day in most cases: READY? HERE'S HOW TO PAY ----------------------------------- 1. First, take a screenshot of this post displaying the exchange rate from USD to BTC above. It is just about real-time and will fluctuate with the global exchange rate. DON'T take a screenshot of any other exchange or website, for consistency-sake. Then, using it as a reference, its time to pay. DO NOT throw this screenshot away after paying. 2. Send the EXACT amount that is displayed in the screenshot you just took to the following BTC address: 1736codvt7MpLz9DwWKVzuDFzvy9TfRQPg To prevent tampering and/or typo conflicts,, I've uploaded the BTC address to a third party cloud notepad which you can see here: https://www.protectedtext.com/1736codvt7MpLz9DwWKVzuDFzvy9TfRQPg - Both the unique page extension and the password are the same BTC address listed above If you notice a difference between any of the addresses, DO NOT send the funds yet and PM me first so that I can verify. 3. Once you've sent the proper amount of coins to the address provided above, copy+paste the transaction ID (TX ID) and send it along with the screenshot from earlier showing the BTC exchange rate amount either to me directly via PM, or you can upload them as a reply to this post. 4. PM me the name and destination address for shipping the wallet Please double check your physical address before submitting And thats it! I'll verify the payment and mark the payment 'completed' after 1 confirmation on the blockchain. Additionally, I'll generate a shipping label and send you the tracking # via PM.Will make sure to drop the package off as soon as possible, and You should receive it in the mail within a couple of days
|
|
|
|
|
So I know I'm new here, but I wanted to see if there was anyone interested in purchasing my Antminer L3+ and Innosilicon A4+ ASIC miners. I have 12 of each and they all are tested and working great. They all have OEM PSUs with them and they were ran in a climate controlled environment. Both miners are for the Scrypt Algorithm, which can mine coins such as LTC, DGB, GAME, XVG, etc.
I purchased them all brand new from the respective manufacturers when they first came out, and obviously I know I'm not going to get anywhere near what I paid for them but I wanted to see if there was any interest in them here. I'd most likely want to sell them in lots rather than singles but I guess that depends on if anyone is even interested in them. I have the turned off at the moment due to the high power prices lately around where I live, but given how cheap crypto is these days it would be a great opportunity for someone to mine LTC with them and hold until it increases in price.
So with all of this being said, anyone interested? If so, let me know what you think you'd be willing to pay for them. I'm located in the US and given the weight of the miners, I would only entertain US buyers. If you're on the East coast, I have no problem selling them to you in-person as well should we come to an arrangement. And of course, I would accept escrow if I ended up shipping them. If I don't get any interest for them, I may just turn them back on and hold the coins for later.
Edit: If I see there's interest, I'll definitely take some photos of them and post. They are currently sitting in storage though, so I'd prefer to only do that once I see some people actually reply to this post. Thanks everyone!
|
|
|
|
|
