[IMPORTANT NOTE:]

I have a good amount of returned ASICMINER Prisma 1.0 boards that I'm willing to sell for $15 a piece. Each board should be capable of operating at 300-360gh/s using .8-.9 watts per gh.



Data cable included. No heatsinks included. Minimum purchase of 2 boards required. Shipping costs covered by buyer. 8 should fit in a Medium or Region B box.

IMPORTANT NOTE:
These boards are all returns from the ASICMINER Prisma return program last year. ASICMINER offered a full refund or replacement to all buyers as there were multiple reports of Prismas catching on FIRE. There are no temperature sensors on the Prisma boards and things tend to go bad if a chip went out and you are using a PSU with no overvoltage protection. Because of this, I take no responsibility for any damage caused by malfunctioning boards. Do not run them near flammable objects! They are also being sold without warranty or support. The boards I will ship out have been marked as running without issue by the original buyers, but I have no way to test them.

With that said, I managed to personally run 8 Prisma 1.0 units for 4 months without issue. Sidehack ran a good amount of them as well. My personal units were run in an area with adequate cooling, and with a good amount of airflow on the outside of the boards. I also did not run them near anything flammable, just in case...


Controllers
I've got a good amount of Prisma 1.0 controllers and usb to uart adapters available if needed. $15 and $10 respectively.


Current Stock. Prices per unit
$15 - "Passing" Boards - 78 0 left
$5 - "Failing" Boards - 48 28 left
$10 - UART to USB Adapter - 8 4 left
$15 - Prisma 1.0 BE Controller - 7 6 left
$15 - Prisma 2.0 BE Controller - 2 left

Shipping info:
Shipping from US zip code 75013
8 Prisma boards will fit in a Medium flat box, which will cost $11.30 to ship. Region B boxes can be cheaper ($8-$13), depending on your location.
Please calculate your shipping costs below:
http://postcalc.usps.gov/

Payment:
Please use coinbase rate to determine your payment amount. Pay to the following address:
Payment Address: 1EbmRs3iBGcKJPoprSa4Vqkat6HizqgGet

I have 2 Neptune cubes that have 2 dead dies that I'm willing to sell for $50 each. Buyer pays shipping.

[ASICPuppy.net In Stock Miners!]

ASICPuppy.net In Stock Miners!

USA Customers - Use the promo code "BLACKFRIDAY" today through Monday for free shipping on orders totaling $100 and over. Additionally, preloaded Rpi and Cubieboards are on sale through Monday.


All orders ship within 24 hours, Mon-Saturday.
Purchase Online: ASICPuppy.net

In Stock:
ANTROUTER R1 - 5.5gh/s+ (Custom Firmware Optional)
ANTMINER U3 - 63gh/s
ATX Breakout Boards from Rockminer
Rockminer USB Hubs
Antminer PSU Jumper Switch
Raspberry Pi B and B+ with custom build of Minera
A10 Cubie with custom build of Minera

Please contact me if you are interested in local pickup (Dallas).

I'm also open to buyers printing their own shipping labels. If you print your own label, you are responsible for insurance and any damages incurred from not insuring the delivery.

Units are in stock with a limited quantity available. First come, first serve.

[.4]

The Lepa is crap in my opinion. It would trip any time I tried to push over 100 watts to a single pcie cable. It did run 8 New rboxes just fine though. Thermaltake ran a few Neptune cubes for over a year. The Logisys PSUs are brand new and unused, so I can not attest to their usefulness, although they should handle a few U3s just fine.
 
Buyer pays shipping or sends a label

.4 BTC



.9 BTC




.05 BTC (15 available)

[ANTMiner R1 Wifi Router - .185 BTC]

ANTMiner R1 Wifi Router - .185 BTC

Status: Open - In Stock

Payment Address: 1N7PY23XqPDCHopBkghDfdGNxuyDppK5zL

I have a small batch of AntRouter R1 units I'm offering for group purchase.

Buyer provides shipping label or shipping payment.  Weight is 7 oz and can fit in a first class padded envelope for $2-$3.  Source shipping zip code is 75013

Custom Firmware!

Custom firmware can be loaded upon request. However, please note that loading custom firmware will void all warranties.

Custom firmware includes:
 - Configuration for up to 4 pools with full Bitmain solo mining support.
 - R1 Frequency and Voltage modulation (Use at your own risk)
 - Detailed R1 stats page, including pool statistics







I will never solicit you via PM for payment, watch out for scammers!

[ASICPuppy.net In Stock Miners!]

ASICPuppy.net In Stock Miners!

All orders ship within 24 hours, Mon-Saturday.
Purchase Online: ASICPuppy.net

In Stock:
ANTROUTER R1 - 5.5gh/s+ (Custom Firmware Optional)
GEKKOSCIENCE COMPAC BM1384 STICKMINER
ANTMINER U3 - 63gh/s
ATX Breakout Boards from Rockminer
Rockminer USB Hubs
Antminer PSU Jumper Switch
Raspberry Pi B and B+ with custom build of Minera
A10 Cubie with custom build of Minera

Please contact me if you are interested in local pickup (Dallas).

I'm also open to buyers printing their own shipping labels. If you print your own label, you are responsible for insurance and any damages incurred from not insuring the delivery.

Units are in stock with a limited quantity available. First come, first serve.

I have a few S7s in hand that I'm willing to sell at purchase price. They are a bit louder than I had hoped.

8.12 BTC each plus shipping.
PM if interested.

I have 2 used units available, including controllers. Both units run without issue. You provide the shipping label or pay shipping.



I also have a number of Prisma 2.0 controllers available for $35 each, shipped.

I've got a brand new, unopened R9 Fury in stock and ready to ship. Looking for $569.99 in BTC (Coinbase rate). You can provide the shipping label or pay shipping costs on top.

http://www.newegg.com/Product/Product.aspx?Item=N82E16814121975&cm_re=r9_fury-_-14-121-975-_-Product

I've got a few Neptune cubes available for purchase. Some have been running for almost a year and some have been running since the bonus batch shipped out. Price is per cube. PM if interested.

[Rpi & Cubie discounted for a limited time!]

Rpi & Cubie discounted for a limited time!

ASICPuppy.net In Stock Miners!

All orders ship within 24 hours, Mon-Saturday.
Purchase Online: ASICPuppy.net

In Stock:
Tube - 800 gh/s
Prisma 2.0 - 1.4 th/s
ANTMINER U3 - 63gh/s
RockMiner NEW R-Box - 100-110gh/s
ATX Breakout Boards from Black Arrow and Rockminer
Rockminer USB Hubs
Antminer PSU Jumper Switch
Raspberry Pi B and B+ with custom build of Minera
A10 Cubie with custom build of Minera

Please contact me if you are interested in local pickup (Dallas or Austin Texas).

I'm also open to buyers printing their own shipping labels. If you print your own label, you are responsible for insurance and any damages incurred from not insuring the delivery.

Units are in stock with a limited quantity available. First come, first serve.

I've got a barely used Ouya console and controller that I bought about year ago when they started taking bitcoin.

.51 BTC shipped in the US.

PM if interested

Purchase with bitcoin or paypal through ASICPuppy.net

[Bitcoin Payment Address:]

Coupons are valid through November 13th. I have a bunch, so it's fair to say I can cover most orders.

Please send PM with bitmain username(email address) and your transaction ID after payment.

.005 BTC
Bitcoin Payment Address: 12hFyHh4Chhyp9Pn1QmDH2dC176j8vTJ68



Litecoin/Dogecoin amount subject to change with exchange rate. I do not currently accept Litecoin or Dogecoin on any of my other sales.

.6 LTC
Litecoin Payment Address: LRHetC17mc1qSFQKupHBP71b6euTeaf9uj

9000 DOGE
Litecoin Payment Address: D5YNkUVDGQaFcveXMN4srUdr1wbXJEa48k

3.2 th/s avg.

PM serious offers.

[(NEW) ASICMiner Prisma Group Buy - 1.47 BTC]

(NEW) ASICMiner Prisma Group Buy - 1.47 BTC

Status: Batch 6 - Paused

Payment Deadline for Batch 6: PAUSED



Note: All orders will be placed in batches of 10. Batch 1,2,3,4 & 5 orders have been placed. AM is queuing shipments in the order they are placed.


Note: I will not contact you soliciting payment. Only pay to the address below. Watch out for scammers!

Payment Address: 1HDVsHsLaSRthdo3TJFqgJjusMLj4boUe6

Unit Price
1-5 units: 1.47 BTC

Accessory Pricing ( Add on to your payment )
 - ASICMiner Block Erupter Controller (.069 BTC) - Controls up to 4 units  
 - RPi ($40) - Controls up to 4 units
 - RPi with imaged SD card ($50)
 - RPi with imaged SD card and wifi ( $70 )

USPS Shipping Rates

TBD. I will accept shipping labels once dimensions are known.

Brief
ASICMiner Prisma is based on a proprietary X48 design for BE200. It greatly reduces power
consumption of the device per GH/s compared to the X24 design.

It takes the same cooling structure and similar form factor as the ASICMiner Tube,
while being even more efficient and compact. Also, we added cgminer support on Raspberry PI.

Spec
Hashrate: 350-370GH/s per hashing unit in normal mode, 1400-1480GH/s per full device.

Power consumption: ~0.67 W/G board-wise. On-wall power consumption relies on PSU
efficiency. (typically 1050-1100 W per full device, 0.75-0.78 W/G)

Size: 35cmx12cmx12cm per full device.

Weight: 7.5kg per full device.

Powering: One 6pin PCI-E plugs per hashing unit.

The hashing units are driven by ethernet controllers. It can also be driven by cgminer on Raspberry PI.
Each ethernet controller or Raspberry PI can run up to 32 units.
...

AM expects to begin shipping Prisma units on October 8th - 27th. Orders will be shipped within 24 hrs of receipt in the USA.

Gigabyte 990FX UD3 AM3+ Motherboard
Used, great condition. $65 shipped

[ASICPuppy.net In Stock Miners!]

ASICPuppy.net In Stock Miners!

Status: Assembled AM Tubes are in STOCK. Free Antminer PSU Jumper switch with orders of 400gh/s or more for a limited time.  

All orders ship within 24 hours, Mon-Saturday.
Purchase Online: ASICPuppy.net

In Stock:
RockMiner NEW R-Box - 100-110gh/s
ASICMiner Tube - 800gh/s+
BTCGarden AM-V1X2 - 620gh/s
ANTMiner S3 441gh/s+
ATX Breakout Boards
Antminer PSU Jumper Switch

 

Please contact me if you are interested in local pickup (Dallas or Austin Texas).

I'm also open to buyers printing their own shipping labels. If you print your own label, you are responsible for insurance and any damages incurred from not insuring the delivery.

Units are in stock with a limited quantity available. First come, first serve.

$9k + shipping. PM if interested.

It's been running in an air conditioned room since February. 1 core out of 16 has avg temps around 95 degrees Celsius while the others are around 72. Power Stepping can be adjusted downwards at expense of hash rate if you are in a hotter environment.

$2999.99
Purchase through ASICPuppy.net or contact me via PM.